1999年土耳其Izmit Mw7.6地震的持续成核过程

实验室和理论研究表明,地震之前会出现一个渐进性的滑动不稳定阶段,在此期间,断层缓慢滑动,而后突然加速并最终导致动态破裂.本文中,我们报道了迄今记录最为完整的大地震之一,即1999年土耳其Izmit Mw7.6地震之前出现了持续时间很久的源自震源的地震信号.这种信号包含一连串的地震破裂,破裂随时间和低频地震噪声的增加而加...     

Impact of sensor measurement error on sensor positioning in water quality monitoring networks

This paper studies the impact of sensor measurement error on designing a water quality monitoring network for a river system, and shows that robust sensor locations can be obtained when an optimization algorithm is combined with a statistical process control (SPC) method. Specifically, we develop a possible probabilistic model of sensor measurement error and the measurement error model is embedded into a simulation model of a river system. An optimization algorithm is used to find the optimal sensor locations that minimize the expected time until a spill detection in the presence of a constraint on the probability of detecting a spill. The experimental results show that the optimal sensor locations are highly sensitive to the variability of measurement error and false alarm rates are often unacceptably high. An SPC method is useful in finding thresholds that guarantee a false alarm rate no more than a pre-specified target level, and an optimization algorithm combined with the thresholds finds a robust sensor network.     

Crop evapotranspiration in the Nile Delta under different irrigation methods

Eddy correlation measurements within the Nile Delta allowed the determination of evapotranspiration (E) for seven crops (rice, maize, cotton, sugar beet, berseem, wheat and fava beans) using basin irrigation (BI), furrow irrigation (FI), BI with increased intervals (BI_i), FI with increased intervals (FI_i), strip irrigation (SI) and drip irrigation (DI). Total E values over the cropping season for rice (BI, BI_i) were the highest (>600 mm), while those for sugar beet (DI), maize (SI and DI) and berseem (BI_i) were the lowest (<250 mm). The differences were due to a combination of atmospheric demand, soil moisture, the presence of surface standing water, root depth, and the length and timing of the cropping season. The DI and SI methods had the advantage for water saving, while the FI_i and BI_i methods were effective for crops with shallow root lengths. Estimated annual E was 566–828 mm/year (water-saving irrigation) and 875–1225 mm/year (conventional irrigation).     

Geodynamic Evolution of Northeastern Tunisia During the Maastrichtian–Paleocene Time: Insights from Integrated Seismic Stratigraphic Analysis

The Maastrichtian–Paleocene El Haria formation was studied and defined in Tunisia on the basis of outcrops and borehole data; few studies were interested in its three-dimensional extent. In this paper, the El Haria formation is reviewed in the context of a tectono-stratigraphic interval using an integrated seismic stratigraphic analysis based on borehole lithology logs, electrical well logging, well shots, vertical seismic profiles and post-stack surface data. Seismic analysis benefits from appropriate calibration with borehole data, conventional interpretation, velocity mapping, seismic attributes and post-stack model-based inversion. The applied methodology proved to be powerful for charactering the marly Maastrichtian–Paleocene interval of the El Haria formation. Migrated seismic sections together with borehole measurements are used to detail the three-dimensional changes in thickness, facies and depositional environment in the Cap Bon and Gulf of Hammamet regions during the Maastrichtian–Paleocene time. Furthermore, dating based on their microfossil content divulges local and multiple internal hiatuses within the El Haria formation which are related to the geodynamic evolution of the depositional floor since the Campanian stage. Interpreted seismic sections display concordance, unconformities, pinchouts, sedimentary gaps, incised valleys and syn-sedimentary normal faulting. Based on the seismic reflection geometry and terminations, seven sequences are delineated. These sequences are related to base-level changes as the combination of depositional floor paleo-topography, tectonic forces, subsidence and the developed accommodation space. These factors controlled the occurrence of the various parts of the Maastrichtian–Paleocene interval. Detailed examinations of these deposits together with the analysis of the structural deformation at different time periods allowed us to obtain a better understanding of the sediment architecture in depth and the delineation of the geodynamic evolution of the region.     

Characterization of spatial patterns in river water quality using chemometric pattern recognition techniques

This study employed three chemometric data mining techniques (factor analysis (FA), cluster analysis (CA), and discriminant analysis (DA)) to identify the latent structure of a water quality (WQ) dataset pertaining to Kinta River (Malaysia) and to classify eight WQ monitoring stations along the river into groups of similar WQ characteristics. FA identified the WQ parameters responsible for variations in Kinta River's WQ and accentuated the roles of weathering and surface runoff in determining the river's WQ. CA grouped the monitoring locations into a cluster of low levels of water pollution (the two uppermost monitoring stations) and another of relatively high levels of river pollution (the mid-, and down-stream stations). DA confirmed these clusters and produced a discriminant function which can predict the cluster membership of new and/or unknown samples. These chemometric techniques highlight the potential for reasonably reducing the number of WQVs and monitoring stations for long-term monitoring purposes.     

Selective Solid Phase Extraction for Separation and Preconcentration of Palladium from Gold Ore and Anode Slime after Complexation with a N4O2 Mixed Donor Ligand Derivative

A selective and sensitive method for the preconcentration, separation, and determination of palladium with flame atomic absorption spectrometry using 4,15‐bis[(4‐methylphenyl)sulfonyl]‐20,21‐dinitro‐2,3,4,5,6,7,9,10,12,13,14,15,16,17‐tetradecahydro‐8,11‐ethano‐1,18,4,8,11,15‐benzodioxa tetraaza cycloicosine (TNACIN) on XAD‐2010 was developed. TNACIN–Pd(II) complex formed acidic aqueous solution (0.075–0.100 M HNO₃) was accumulated on XAD‐2010 and then eluted with 1 M HCl in acetone. The effects of some analytical parameters including pH, TNACIN amount, sample volume, eluent type, and concentration, sample flow rate and matrix ions were studied for optimization of the method. Detection limit and precision were calculated for Pd(II). This method was also verified with CRM and internal standard, and satisfactory results were obtained.     

Assessment of Urban Source Metal Levels in Influent,Effluent, and Sludge of Two Municipal Biological Nutrient Removal Wastewater Treatment Plants of Bursa,an Industrial City in Turkey

Removal of Al, As, Cd, total Cr (Tot. Cr), Cu, Total Fe (Tot. Fe), Mn, Ni, Pb, Sb, Sn, and Zn from urban effluent by wastewater treatment plants (WWTPs) operated under five‐stage Bardenpho® process were investigated and water soluble metals in the dewatered sludge were quantified. Samples were collected from two WWTPs on a weekly basis over an approximately 2.5‐year time span. Tot. Fe and Al were the most abundant, As, Pb, Ni, Cu, and Cd were the least abundant metals in the influents of both WWTPs. Removal efficiencies above 75% were achieved for Tot. Cr, Tot. Fe, Al, and Cu, whereas, no significant removal was observed for As, Cd, Pb, Sb, and Sn. Removal of Tot. Cr, Cu, Tot. Fe, Zn, Al, Mn, and Ni were influenced by influent suspended solids concentrations, and of Tot. Cr, Zn, and Cd were influenced by their initial content in the influent. Zn removal efficiency of biological nutrient removal (BNR) system in this study was higher and Cd removal efficiency was lower than that of conventional activated sludge reported in the literature. No remarkable difference for metals such as Cu, Mn, Ni, and Pb was observed between the removal efficiencies of conventional system and BNR system.