Impact of sensor measurement error on sensor positioning in water quality monitoring networks

This paper studies the impact of sensor measurement error on designing a water quality monitoring network for a river system, and shows that robust sensor locations can be obtained when an optimization algorithm is combined with a statistical process control (SPC) method. Specifically, we develop a possible probabilistic model of sensor measurement error and the measurement error model is embedded into a simulation model of a river system. An optimization algorithm is used to find the optimal sensor locations that minimize the expected time until a spill detection in the presence of a constraint on the probability of detecting a spill. The experimental results show that the optimal sensor locations are highly sensitive to the variability of measurement error and false alarm rates are often unacceptably high. An SPC method is useful in finding thresholds that guarantee a false alarm rate no more than a pre-specified target level, and an optimization algorithm combined with the thresholds finds a robust sensor network.     

Crop evapotranspiration in the Nile Delta under different irrigation methods

Eddy correlation measurements within the Nile Delta allowed the determination of evapotranspiration (E) for seven crops (rice, maize, cotton, sugar beet, berseem, wheat and fava beans) using basin irrigation (BI), furrow irrigation (FI), BI with increased intervals (BI_i), FI with increased intervals (FI_i), strip irrigation (SI) and drip irrigation (DI). Total E values over the cropping season for rice (BI, BI_i) were the highest (>600 mm), while those for sugar beet (DI), maize (SI and DI) and berseem (BI_i) were the lowest (<250 mm). The differences were due to a combination of atmospheric demand, soil moisture, the presence of surface standing water, root depth, and the length and timing of the cropping season. The DI and SI methods had the advantage for water saving, while the FI_i and BI_i methods were effective for crops with shallow root lengths. Estimated annual E was 566–828 mm/year (water-saving irrigation) and 875–1225 mm/year (conventional irrigation).     

Geodynamic Evolution of Northeastern Tunisia During the Maastrichtian–Paleocene Time: Insights from Integrated Seismic Stratigraphic Analysis

The Maastrichtian–Paleocene El Haria formation was studied and defined in Tunisia on the basis of outcrops and borehole data; few studies were interested in its three-dimensional extent. In this paper, the El Haria formation is reviewed in the context of a tectono-stratigraphic interval using an integrated seismic stratigraphic analysis based on borehole lithology logs, electrical well logging, well shots, vertical seismic profiles and post-stack surface data. Seismic analysis benefits from appropriate calibration with borehole data, conventional interpretation, velocity mapping, seismic attributes and post-stack model-based inversion. The applied methodology proved to be powerful for charactering the marly Maastrichtian–Paleocene interval of the El Haria formation. Migrated seismic sections together with borehole measurements are used to detail the three-dimensional changes in thickness, facies and depositional environment in the Cap Bon and Gulf of Hammamet regions during the Maastrichtian–Paleocene time. Furthermore, dating based on their microfossil content divulges local and multiple internal hiatuses within the El Haria formation which are related to the geodynamic evolution of the depositional floor since the Campanian stage. Interpreted seismic sections display concordance, unconformities, pinchouts, sedimentary gaps, incised valleys and syn-sedimentary normal faulting. Based on the seismic reflection geometry and terminations, seven sequences are delineated. These sequences are related to base-level changes as the combination of depositional floor paleo-topography, tectonic forces, subsidence and the developed accommodation space. These factors controlled the occurrence of the various parts of the Maastrichtian–Paleocene interval. Detailed examinations of these deposits together with the analysis of the structural deformation at different time periods allowed us to obtain a better understanding of the sediment architecture in depth and the delineation of the geodynamic evolution of the region.     

Update earthquake risk assessment in Cairo,Egypt

The Cairo earthquake (12 October 1992; m _b  = 5.8) is still and after 25 years one of the most painful events and is dug into the Egyptians memory. This is not due to the strength of the earthquake but due to the accompanied losses and damages (561 dead; 10,000 injured and 3000 families lost their homes). Nowadays, the most frequent and important question that should rise is “what if this earthquake is repeated today.” In this study, we simulate the same size earthquake (12 October 1992) ground motion shaking and the consequent social-economic impacts in terms of losses and damages. Seismic hazard, earthquake catalogs, soil types, demographics, and building inventories were integrated into HAZUS-MH to produce a sound earthquake risk assessment for Cairo including economic and social losses. Generally, the earthquake risk assessment clearly indicates that “the losses and damages may be increased twice or three times” in Cairo compared to the 1992 earthquake. The earthquake risk profile reveals that five districts (Al-Sahel, El Basateen, Dar El-Salam, Gharb, and Madinat Nasr sharq) lie in high seismic risks, and three districts (Manshiyat Naser, El-Waily, and Wassat (center)) are in low seismic risk level. Moreover, the building damage estimations reflect that Gharb is the highest vulnerable district. The analysis shows that the Cairo urban area faces high risk. Deteriorating buildings and infrastructure make the city particularly vulnerable to earthquake risks. For instance, more than 90 % of the estimated buildings damages are concentrated within the most densely populated (El Basateen, Dar El-Salam, Gharb, and Madinat Nasr Gharb) districts. Moreover, about 75 % of casualties are in the same districts. Actually, an earthquake risk assessment for Cairo represents a crucial application of the HAZUS earthquake loss estimation model for risk management. Finally, for mitigation, risk reduction, and to improve the seismic performance of structures and assure life safety and collapse prevention in future earthquakes, a five-step road map has been purposed.     

Mitigating the effects of sand dunes on seismic data from the Rub al Khali basin,Saudi Arabia

The Rub Al Khali region in Saudi Arabia is characterized by the presence of sand dunes separated by salt flats, also called Sabkhas. In general, the elevation of dunes in this region varies between 90 and 250 m above sea level. The presence of these sand dunes, along with the rapidly changing surface topography poses challenges for seismic data acquisition and processing. The high contrast in acoustic impedance between the dune base and the underlying formation often results in amplification of seismic waves that are recorded at stations located on the surface of sand dunes. Attempts to address the issue using conventional surface-consistent amplitude scaling methods without reducing these amplification effects generally fail, thus compromising the suitability of the processed data for amplitude versus offset analysis. In this study, we propose a new reference site technique to reduce the effects of sand dune amplification, enabling the production of data sets that are suitable for amplitude versus offset processing. The proposed technique uses a deterministic approach to derive surface-consistent, frequency-dependent de-amplification functions for shots and stations located on the dunes only. Two-dimensional synthetic and field data examples show that the technique significantly reduces the effects of sand dune amplification.     

Dynamic analysis of a vertical plate exposed to breaking wave impact

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.     

The concept of ecological succession applied to phytoplankton over four consecutive years in five ponds featuring a salinity gradient

The distribution of phytoplankton abundance, biomass and species composition coupled with environmental factors and metazooplankton was studied relatively intensively and over a period of four consecutive years in five ponds featuring a gradient of increasing salinity from near to that of sea water to a nine-fold concentration from 2000 to 2003. The results indicate that the physical characteristics of the water (temperature and salinity) were quite similar over the years. Nutrients, which were concentrated in pond A1, decreased with increases in salt concentration. The composition of the phytoplankton community showed strong seasonality. Diatoms dominated in the first ponds A1, A16 and C2-1, followed by dinoflagellates. Chlorophyceae dominated the phytoplankton community in the hypersaline ponds M2 and TS. Cyanobacteriae were relatively abundant in ponds M2 and TS. The highest phytoplankton density and biomass were found in the ponds with the highest salinity due to the proliferation of Dunaliella salina (Chlorophyta: Volvocales). The inter-annual study of phytoplankton succession in the Sfax solar salterns showed slight differences among the years of study due to the stability of the environmental conditions. Phytoplankton communities were permanently primitive, stage 1 – structured as they failed to build complexity because of salt stress which operates for longer and above any other variables. This reduced frequency of disturbance to the existing course of regulation, allowed the community to “mature” from its “primitive” state, rather than experience frequent structural setbacks.     

Analysis of kinematic seismic response of tapered piles

In the present work, a two-phase analysis is used to assess the lateral movement of a tapered pile due to kinematic seismic loading resulted from earthquakes. First, the free-field horizontal displacement of the ground due to earthquake is estimated using available theory of wave propagation. Second, these estimated soil movements are imposed on the taper pile in a closed-form solution to compute the pile response. The governing differential equation for an arbitrary pile segment is obtained, which includes the free-field horizontal movement estimated from the first phase. The equation is solved explicitly to obtain the horizontal deflection. Parametric studies show that tapered piles tend to be more flexible than uniform piles of the same volume and length under earthquake loading, which is soundly interesting.     

Separation of magnetic anomalies into induced and remanent magnetization contributions

Inversion of magnetic data is complicated by the presence of remanent magnetization, and it provides limited information about the magnetic source because of the insufficiency of data and constraint information. We propose a Fourier domain transformation allowing the separation of magnetic anomalies into the components caused by induced and remanent magnetizations. The approach is based on the hypothesis that each isolated source is homogeneous with a uniform and specific Koenigsberger ratio. The distributions of susceptibility and remanent magnetization are subsequently recovered from the separated anomalies. Anomaly components, susceptibility distribution and distribution of the remanent and total magnetization vectors (direction and intensity) can be achieved through the processing of the anomaly components. The proposed method therefore provides a procedure to test the hypotheses about target source and magnetic field, by verifying these models based on available information or a priori information from geology. We test our methods using synthetic and real data acquired over the Zhangfushan iron-ore deposit and the Yeshan polymetallic deposit in eastern China. All the tests yield favourable results and the obtained models are helpful for the geological interpretation.