Site classification of Turkish national strong-motion stations

Since 1973, the General Directorate of Disaster Affairs of Turkey has deployed several strong-motion accelerographs at selected sites. Within the framework of the project entitled Compilation of National Strong Ground Motion Database in Accordance with International Standards, site conditions were investigated within the upper 30-m depth by surface seismic and standard penetration tests. Preliminary characterization of the sites is made by making use of both geophysical and geotechnical criteria of NEHRP Provisions and Eurocode-8 site classification systems. The liquefaction susceptibility of those sites which comprise saturated cohesionless deposits is also determined. Mean shear-wave velocity, mean penetration resistance, site class, and liquefaction susceptibility of each site are tabulated. The Turkish strong-motion database supplemented by detailed information on site conditions is a valuable source of information particularly for those studies that put emphasis on the relationship between site conditions and strong-motion parameters.     

Assessment of sediment yield estimations for large watershed areas: a case study for the Seyhan,Demirköprü and Hirfanlı reservoirs in Turkey

Abstract

Analyses of data from reservoir surveys and sediment rating curves are compared to predict sediment yield in three large reservoir watershed areas in Turkey. Sediment yield data were derived from reservoir sedimentation rates and suspended sediment measurements at gauging stations. The survey data were analysed to provide the volume estimates of sediment, the time-averaged sediment deposition rates, the long-term average annual loss rates in the reservoir storage capacity, and the long-term sediment yield of the corresponding watershed areas. Four regression methods, including linear and nonlinear cases, were applied to rating curves obtained from gauging stations. Application of the efficiency test to a power function form of a rating curve with nonlinear regression yielded the highest efficiency values. Based on the analysis of the sediment rating curves, sediment load fluxes were calculated by using average daily discharge data at each gauging station. Comparison of these two sediment yield values for each reservoir showed that the sediment yields from the suspended sediment measurements, SY_GS, are 0.99 to 3.54 times less than those obtained from the reservoir surveys, SY_RS. The results from the reservoir surveys indicate that all three reservoirs investigated have lost significant storage capacity due to high sedimentation rates.     

Did satellite imagery supersede aerial imagery? A perspective from 3D geopositioning accuracy

In this study, the geometric accuracy comparison of aerial photos and WorldView-2 satellite stereo image data is evaluated with the different number and the distribution of the ground control points (GCPs) on the basis of large scale map production. Also, the current situation of rivalry between airborne and satelliteborne imagery was mentioned. The geometric accuracy of Microsoft UltraCam X 45 cm ground sampling distance (GSD) aerial imagery and WorldView-2 data both with and without GCPs are also separately analyzed. The aerial photos without any GCP by only using global navigation satellite system (GNSS) and inertial measurement unit (IMU) data with tie points give an accuracy of ±1.17 m in planimetry and ±0.71 m in vertical that means nearly two times better accuracy than the rational polynomial coefficient (RPC) of stereo WorldView-2. Using one GCP affects the accuracies of aerial photos and WorldView-2 in different ways. While this situation distorts the aerial photo block, it corrects the shift effect of RPC in WorldView-2 and increases the accuracy. By using four or more GCPs, ½?pixel (～0.23 m) accuracy in aerial photos and 1 pixel (～0.50 m) accuracy in WorldView-2 can be achieved in horizontal. In vertical, aerial photos have 1 pixel (～0.55 m) and WorldView-2 has 1.5 pixels (～0.85 m) accuracy. These results show that Worldview-2 imagery can be used in the production of class I 1:5000 scale maps according to the ASPRS Accuracy Standards for Digital Geospatial Data in terms of geometric accuracy. It is concluded that the rivalry between aerial and satellite imagery will continue for some time in the future.     

Mitigating the effects of sand dunes on seismic data from the Rub al Khali basin,Saudi Arabia

The Rub Al Khali region in Saudi Arabia is characterized by the presence of sand dunes separated by salt flats, also called Sabkhas. In general, the elevation of dunes in this region varies between 90 and 250 m above sea level. The presence of these sand dunes, along with the rapidly changing surface topography poses challenges for seismic data acquisition and processing. The high contrast in acoustic impedance between the dune base and the underlying formation often results in amplification of seismic waves that are recorded at stations located on the surface of sand dunes. Attempts to address the issue using conventional surface-consistent amplitude scaling methods without reducing these amplification effects generally fail, thus compromising the suitability of the processed data for amplitude versus offset analysis. In this study, we propose a new reference site technique to reduce the effects of sand dune amplification, enabling the production of data sets that are suitable for amplitude versus offset processing. The proposed technique uses a deterministic approach to derive surface-consistent, frequency-dependent de-amplification functions for shots and stations located on the dunes only. Two-dimensional synthetic and field data examples show that the technique significantly reduces the effects of sand dune amplification.     

Origin and source regions of PM10 in the Eastern Mediterranean atmosphere

A set of daily PM₁₀ (n = 281) samples collected from April 2001 to April 2002 at a rural site (Erdemli), located on the coast of the Eastern Mediterranean, were analyzed applying Mass Closure (MC), absolute principal factor analysis (APFA) and Positive Matrix Factorization (PMF) to determine source contributions. The results from the three techniques were compared to identify the similarities and differences in the sources and source contributions. Source apportionment analysis indicated that PM₁₀ were mainly originated from natural sources (sea salt + crustal ≈ 60%) whilst secondary aerosols and residual oil burning accounted for approximately 20% and 10% of the total PM₁₀ mass, respectively. Calculations for sulfate showed that on average 8% and 12% of its total concentration were originated from sea salt and biogenic emissions, respectively. However, the contribution by biogenic emissions may reach up to a maximum of ~ 40% in the summer. Potential Source Contribution Function (PSCF) analysis for identification of source regions showed that the Saharan desert was the main source area for crustal components. For secondary aerosol components the analysis revealed one source region, (i.e. the south-Eastern Black Sea), whereas for residual oil, Western Europe and the western Balkans areas were found to be the main source regions.     

Trace Metal Solid State Speciation in Aerosols of the Northern Levantine Basin,East Mediterranean

An established three stage sequential leach scheme was applied to a series of selected high volume aerosol samples (n = 35) collected from the Turkish Eastern Mediterranean coastline (Erdemli). Samples were selected according to their air mass back trajectory history to reflect the contrasting mixtures of aerosol material present in the Eastern Mediterranean marine aerosol. Two populations were adopted, those samples which were classed as “anthropogenic” and those which were “Saharan” dominated aerosol populations. Applying the three stage leach it was possible to define the proportion for each of the considered metals (Al, Fe, Cu, Pb, Cd, Zn and Mn) present in the (a) “exchangeable” (b) “carbonate / oxide” and (c) “refractory” phases, representing novel solid state aerosol speciation data for this marine system. Clear trends were established, conforming with data from previous studies with mainly crustal derived metals (Al and Fe) being present in the refractory phases (Al > 88%; Fe > 84%) and those influenced by anthropogenic sources being dominating in the exchangeable phase, although for these metals the variability was comparatively high (12–64%; 19–85%; 40–100% for Zn, Pb and Cd, respectively). For the majority, greater exchangeable fractions were present the lower the crustal source contribution to the aerosol population, whereas the “refractory” fraction exhibited contrasting behaviour. This was illustrated by the novel application of the mixing diagram, presenting each of the three speciation stages against the corresponding percent anthropogenic contribution to each collected sample. Zn, Pb and Cd all illustrated progressive decrease in the percent exchangeable with increasing crustal contribution to the aerosol population. The percent exchangeable was discussed in terms of its use to represent the upper limit of the bioavailable fraction of metal associated with the aerosol, post deposition. The mixing diagram approach enabled the prediction of the residual fractions for Cd, Pb and Zn (41 ± 4%; 62 ± 4% and 82 ± 5%, respectively,) in Saharan end-member material.     

Discovering a pull-apart basin using InSAR in Bursa,Turkey

The city of Bursa in Turkey is surrounded by major and secondary fault branches which splay from the North Anatolian Fault. Nonetheless, as their traces were not exactly known in the alluvial land of the Bursa basin, until this study, they were not plotted in the official active fault map of Turkey. In this study, the Bursa basin was observed by InSAR technology, and the subsidence which is consistent with the pull-apart basin geometry was detected in the basin. This finding was discussed in the local platforms in Turkey. Then, the city of Bursa was included into the priority provinces for the urban reconstruction under the risk of an earthquake, and the official active fault map of the region was revised by General Directorate of Mineral Research and Exploration of Turkey.     

A statistical evaluation of the potential genotoxic activity in the surface waters of the Golden Horn Estuary

The potential genotoxic activity in the surface waters of the Golden Horn Estuary was statistically evaluated utilizing a combination of appropriate parametric and non-parametric tests. The genotoxic activities that were associated with the water samples were determined by the SOS chromotest microplate assay. This assay utilizes β-galactosidase activity, alkaline phosphatase activity, and four different solvent controls, to generate reliable results when corrected induction factors (CIF) are used as quantitative measurements of genotoxic activity. The CIF values were obtained from a total of 384 different genotoxic experiments that were grouped into subsets according to the respective seasons and the selected sampling locations. A total of 160 subsets were statistically compared to assess any possible differences between the pairs of groups, with 95% confidence limits. The findings of this study clearly indicate that some seasonal variations exist in the CIF values at several sampling sites. However, no potentially hazardous impact to the aquatic environment was found in the estuarine system.