Paleogene evolution and demise of the proto‐Paratethys Sea in Central Asia (Tarim and Tajik basins): Role of intensified tectonic activity at ca. 41 Ma

The proto‐Paratethys Sea covered a vast area extending from the Mediterranean Tethys to the Tarim Basin in western China during Cretaceous and early Paleogene. Climate modelling and proxy studies suggest that Asian aridification has been governed by westerly moisture modulated by fluctuations of the proto‐Paratethys Sea. Transgressive and regressive episodes of the proto‐Paratethys Sea have been previously recognized but their timing, extent and depositional environments remain poorly constrained. This hampers understanding of their driving mechanisms (tectonic and/or eustatic) and their contribution to Asian aridification. Here, we present a new chronostratigraphic framework based on biostratigraphy and magnetostratigraphy as well as a detailed palaeoenvironmental analysis for the Paleogene proto‐Paratethys Sea incursions in the Tajik and Tarim basins. This enables us to identify the major drivers of marine fluctuations and their potential consequences on Asian aridification. A major regional restriction event, marked by the exceptionally thick (≤ 400 m) shelf evaporites is assigned a Danian‐Selandian age (ca. 63–59 Ma) in the Aertashi Formation. This is followed by the largest recorded proto‐Paratethys Sea incursion with a transgression estimated as early Thanetian (ca. 59–57 Ma) and a regression within the Ypresian (ca. 53–52 Ma), both within the Qimugen Formation. The transgression of the next incursion in the Kalatar and Wulagen formations is now constrained as early Lutetian (ca. 47–46 Ma), whereas its regression in the Bashibulake Formation is constrained as late Lutetian (ca. 41 Ma) and is associated with a drastic increase in both tectonic subsidence and basin infilling. The age of the final and least pronounced sea incursion restricted to the westernmost margin of the Tarim Basin is assigned as Bartonian–Priabonian (ca. 39.7–36.7 Ma). We interpret the long‐term westward retreat of the proto‐Paratethys Sea starting at ca. 41 Ma to be associated with far‐field tectonic effects of the Indo‐Asia collision and Pamir/Tibetan plateau uplift. Short‐term eustatic sea level transgressions are superimposed on this long‐term regression and seem coeval with the transgression events in the other northern Peri‐Tethyan sedimentary provinces for the 1st and 2nd sea incursions. However, the 3rd sea incursion is interpreted as related to tectonism. The transgressive and regressive intervals of the proto‐Paratethys Sea correlate well with the reported humid and arid phases, respectively in the Qaidam and Xining basins, thus demonstrating the role of the proto‐Paratethys Sea as an important moisture source for the Asian interior and its regression as a contributor to Asian aridification.     

Correction to: Calibration of Genetic Algorithm Parameters for Mining-Related Optimization Problems

Natural Resources Research - The original version of this article unfortunately contained a mistake in figures. The source file for figures was submitted and published incorrectly; hence, the...     

Desertification,famine, and the 1988 rainfall —

The 1988 good rainy season in the Sudan raised the hopes that desertification/land degradation and shortage of food so markedly observed in Western Sudan have been elevated. This was particularly so as large quantities of grains were produced in the mechanized rain-fed agricultural schemes in the clay plains of Eastern Sudan. But the field work carried by the author in the Umm Ruwaba district of Kordofan region in July/August 1989 shows that, although there has been some improvement in the crop production situation, desertification/land degradation and shortage of food produced locally are still prevailing in the district. The people are still living below the poverty line, but they are able to cope because of remittances from members of the families working abroad and because of donations of food by some world organizations.     

A conjugate strike-slip fault system within the extensional tectonics of Western Turkey

Three main shocks M-1, M-2 and M-3 (17 October 2005 at 05:45 UTC, M _w 5.4; 17 October at 09:46 UTC, M _w 5.8 and 20 October at 21:40 UTC, M _w 5.9) and their associated aftershocks within the Gulf of S i ğac i k, 50 km southwest of Izmir, Turkey were studied in detail. A temporary seismic network deployed during the activity allowed the hypocentre of M-3 and subsequent aftershocks to be determined with high accuracy. A relative relocation technique was used to improve the epicentres of M-1 and M-2. All three main shocks have strike-slip mechanisms which agree with the linear trends of the aftershock locations. Two distinct zones were illuminated by the aftershock locations. The zones contain clear echelon patterns with slightly different orientations from the trend of the aftershock distribution. M-2 and M-3 ruptured along of the eastern rupture zone which aligns N45°E. However the strike direction of M-1 is not clearly identified. The alignment of the two rupture zones intersect at their southern terminus at an angle of 90°. The fault zones form conjugate pair system and static triggering is considered as a probable mechanism for the sequential west to east occurrence of M-1, M-2 and M-3. This earthquake sequence provides seismological evidence for conjugate strike-slip faulting co-existing within a region dominated by north–south extension and well-developed east–west trending normal faults.     

Secondary dispersion from gold deposits in west Turkey

Orientation studies over the Sarpda? prospect in the Biga peninsula and the Arapdagi deposit near Izmir have provided elear evidence for elemental dispersion around west Turkish gold prospects. Although these deposits are of different types, silicification associated with the deposits results in the main part of both deposits forming topographic highs.At Sarpda? gold mineralisation is relatively weak compared with nearby prospects and associated with a silicified cap on the main hill. Comparison of coarse and fine fractions, based on a 190 μm size split of 8 kg of -2 mm material, suggests that gold disperses clastically on the steep slopes, probably within silica, but coarse grains break down giving Au concentrations in the finer fractions at the base of the main slope. Discrete gold grains, that can be panned, only occur 1–2 km downstream within the streams and heavy mineral concentrations are very limited. This interpretation of Au dispersion is consistent with the data from 1 kg samples collected at the higher primary grade, but more contaminated, Arapda?i prospect.Antimony is the most consistent pathfinder both for the silicified cap at Sarpda? and for gold-rich veins at Arpada?i. It gives high contrast anomalies. Arsenic is useful being more mobile than Sb, although contrast may be low. High resolution Ag data can be useful but base metal enrichments are also often associated with Ag anomalies. Most prospects have some base metal enrichments although they can be displaced from the main gold-rich parts of the deposit and anomalies may be weak. Lead and Cu are the more consistently useful elements.The use of large (> 8 kg of -2 mm material) samples produces consistent stream sediment data that can be used to reliably interpret single samples and quantify Au anomalies. A survey around the Halíköy Hg and Emirli Sb mines, using these large samples, confirmed the extension of the known gold-bearing Emirli structure. In contrast the major Hg-bearing Halíköy Fault is gold poor although a structure parallel to it is auriferous.     

Interpretation of some gravity profiles from estern Sudan

Summary Gravimetrically determined stations in the province of Kordofan, western Sudan, are interpreted. Boreholes and surface geology are employed, and a Gier Algol print-plot programme has been used. The interpretation shows that the granite mass increases in average thickness from 2000 m in the west to about 20000 m in the east. A dyke-like pattern of gneisses and schists is observed.The paper is forwarded by ProfessorSvend Saxov, Laboratory of Applied geophysics, University of Aarhus, Aarhus, Denmark.     

Effect of attachment configuration on the trapping efficiency of Vaseline-coated slide catchers for windblown particles

There are various types of the windblown sediment traps developed for wind tunnel and field studies. One of the main supports expected from these traps is in measuring surface dust concentrations to appropriately derive flux equations. The measurement performance and accuracy of a trap is very important and depends strictly upon the physical characteristics and the behaviors of dust grains with air flows. This paper presents the measurement results of static pressure distribution (SPD) of wind flow around Vaseline-coated slide (VCS) catchers with an aim of finding out whether or not particle trapping efficiency (η) of the VCS is related to the SPD. The SPD was evaluated by a wind reduction coefficient (R _c) in a series of wind tunnel experiments with different VCS settings which have different attachment configurations on a pole. Three VCS configurations were considered: a configuration on a circular plastic pole (CPP) and two configurations on wooden square poles (WSP₁ and WSP₂, respectively). Thus, the primary contribution of this work was to experimentally analyze the effect of the different attachment configurations on the SPD, and the secondary objective was to determine the effect of the SPD on the η. It was shown that spatial correlation and spatial pattern of the R _c were different in the surrounding area of each configuration, and ANOVA and DUNCAN tests indicated that η(s) of WSP₁, WSP₂, and CPP were different at the significant level of P ≤ 0.05 with the mean of 0.94 ± 0.09, 0.63 ± 0.14, and 1.13 ± 0.07, respectively. Additionally, the amount of PM₂₀, PM₄₀, PM₆₀, PM₈₀, and PM₁₀₀ trapped by the configurations of WSP₁, WSP₂, and CPP considerably varied depending upon the particular aerodynamic circumstances associated with every configuration.     

Local knowledge on plants and domestic remedies in the mountain villages of Peshkopia (Eastern Albania)

Ethnobotanical studies in the Balkans are crucial for fostering sustainable rural development in the region and also for investigating the dynamics of change of Traditional Ecological Knowledge (TEK), which has broad-sweeping implications for future biodiversity conservation efforts. A survey of local botanical and medical knowledge and practices was conducted in four mountainous villages of the Peshkopia region in northeast Albania, near the Macedonian border. Snowball sampling techniques were employed to recruit 32 informants for participation in semi-structured interviews regarding the use of the local flora for food, medicinal, veterinary and ritual purposes. The uses of 84 botanical taxa were recorded as well as a number of other folk remedies for the treatment of both humans and livestock. Comparison of the collected data with another ethnobotanical field study recently conducted among Albanians living on the Macedonian side of Mount Korab shows a remarkable divergence in medicinal plant uses, thus confirming the crucial role played by the history of the last century in transforming TEK. Most noteworthy, as a legacy of the Communist period, a relevant number of wild medicinal taxa are still gathered only for trade rather than personal/familial use. This may lead to unsustainable exploitation of certain taxa (i.e. Orchis and Gentiana spp.) and presents some important conservation challenges. Appropriate development and environmental educational frameworks should aim to reconnect local people to the perception of limitation and renewability of botanical resources.     

Fractures system within Dammam Dome and its relationship to the doming process,Eastern Saudi Arabia

Dammam Dome is an oval-shaped structure that covers an area of about 500 km² and encompasses Al Khobar, Al Dhahran and part of Ad Dammam cities, east of Saudi Arabia. The dome characterizes by the presence of well developed fractures system that exposes at its apex and extends to its peripheries. Based on their size, trend and extent, fractures within Dammam Dome are divided into three types: regional (major) fractures, local (minor) fractures and very small size-localized fractures. This study discusses the criteria used in classifying those fractures, and the relationship of the regional (major) ones to the doming process. A model for the trends pattern of fracture is suggested for those fractures, and examined with the concentric and radial fracture pattern associated normally with dome structures. The suggested model is compatible and concordant with the dome model, which proves that the major fractures in the area are related to the dome emplacement and process. Outcomes and findings of this study are crucial for understanding the behavior and distribution of fractures associated with domes. Additionally, the suggested model of fractures and their trend pattern is important model in similar setting for hydrocarbon exploration and for any urban development and major constructions within the Dome vicinities.     

Mapping and attenuation of surface waves side scattered by near-surface diffractors

Near-surface diffractors are one of the problems in land seismic exploration. They can scatter the surface wave energy emanating from the seismic source and contaminate the signal received by seismic receivers. The scattered energy from the near-surface diffractors manifests itself on seismic shot gathers as strong hyperbolic events, called diffractions, masking the weakly reflected body waves. Diffractions present complications to most of surface-wave suppression schemes, especially when they have been scattered by scatterers outside the receiver line. Different methods have been used to eliminate diffractions from seismic data, including geophone arrays, filtering, and inverse scattering. Each of those methods has its own limitations. In this study, we present processing algorithms to map and attenuate near-surface diffractors of surface waves in seismic shot gathers. The mapping algorithm is based on semblance measurements and time–offset relations, while the attenuation algorithm is based on the least-square fitting of a source wavelet. The algorithms are applied on synthetic data from two different models. The first model has three near-surface diffractors, while the second model has three clusters of near-surface diffractors. Each cluster consists of three near-surface diffractors with a different geometry for each cluster. The results show that the proposed algorithms are successful in locating and attenuating most near-surface diffractors, except when the separation between individual diffractors is below the wavelength of the diffracted surface wave.