The deformation evaluation of Kızlaç T3A Tunnel (Osmaniye, Turkey)

This study covers the graphical analysis of deformation values measured in the Kızlaç T3A tunnel (Osmaniye, Turkey), which was built as a part of the Tarsus–Adana–Gaziantep Motorway Project. Excavation was performed through a sequence which was composed of sandstone–shale alternation, sandstone and dolerite dyke. Horizontal, longitudinal and settlement deformation values were optically read and recorded daily on a computer. These data were evaluated according to New Austrian Tunneling Method. Total deformation measurement, risky area determination and forecast of transitions between weak and stiff rock, stiff and weak rock were assessed as a result of deformation evaluation for tunnel stability, safety and economy.

The largest resultant deformation value (13 mm) was measured in the sandstone–shale alternation between chainage 500 and 550 m, which was highly weathered by groundwater and affected by local tectonic disturbance. The smallest deformation value was observed in a stiff dolerite dyke between 370 and 430 m, where at times the deformation values decreased to zero. In the sandstone, small resultant deformation values (2–4 mm) were also recorded. The 500–550-m interval of tunnel alignment had the highest risk for tunnel instability in the studied section but the deformation values (maximum 13 mm) were within the tolerable deformation range (10 cm). Small negative longitudinal deformation values decreasing between chainage 320 and 370 m and small positive longitudinal deformation values decreasing between 420 and 480 m indicate the sandstone–shale alternation (weak rock) and the dyke (stiff rock) and sandstone (stiff rock), and the sandstone–shale alternation with a fault gauge zone (weak rock), respectively. These longitudinal deformations needed probable to predict the lithological transitions ahead of the face, which in timely were used to determination of the tunnel support system.     

Socio-spatial polarization and the (re-)distribution of deprived groups in world cities: A case study of Hong Kong

This paper draws on theoretical discussions of world cities to analyze socio-spatial polarization and (re-)distribution of deprived groups in Hong Kong in the 2000s. Intensifying global economic restructuring processes have induced socio-economic polarization, thereby producing deprived groups although the spatial outcomes may depend on the city-specific context. When local policies do not counteract the polarization trend, a spatial manifestation of widening socio-economic gaps can be expected. Intensified pro-growth policies adopted since Hong Kong’s return to Chinese rule in 1997 and during its economic recession in the early 2000s have worsened the impact of globalization-induced socio-economic and spatial restructuring. Census data from 2001 and 2011 show increasingly differentiated socio-economic profiles at the district level. The analysis offered in this study also points to a decreased socially mixed society in 2011 when the deprived groups lived in districts with less presence of the advantaged population.     

Regional gravimetric quasi-geoid model and transformation surface to national height system for Turkey (THG-09)

Turkish regional geoid models have been developed by employing a reference earth gravitational model, surface gravity observations and digital terrain models. The gravimetric geoid models provide a ready transformation from ellipsoidal heights to the orthometric heights through the use of GPS/leveling geoid heights determined through the national geodetic networks. The recent gravimetric models for Turkish territory were computed depending on OSU91 (TG-91) and EGM96 (TG-03) earth gravitational models. The release of the Earth Gravitational Model 2008 (EGM08), the collection of new surface gravity observations, the advanced satellite altimetry-derived gravity over the sea, and the availability of the high resolution digital terrain model have encouraged us to compute a new geoid model for Turkey. We used the Remove-Restore procedure based on EGM08 and applied Residual Terrain Model (RTM) reduction of the surface gravity data. Fast Fourier Transformation (FFT) was then used to obtain the residual quasigeoid from the reduced gravity. We restored the individual contributions of EGM08 and RTM to the whole quasi-geoid height (TQG-09). Since the Helmert orthometric height system is adopted in Turkey, the quasi-geoid model (TQG-09) was then converted to the geoid model (TG-09) by making use of Bouguer gravity anomalies and digital terrain model. After all we combined a gravimetric geoid model with GPS/leveling geoid heights in order to obtain a hybrid geoid model (THG-09) (or a transformation surface) to be used in GPS applications. The RMS of the post-fit residuals after the combination was found to be ± 0.95 cm, which represents the internal precision of the final combination. And finally, we tested the hybrid geoid model with GPS/leveling data, which were not used in the combination, to assess the external accuracy. Results show that the external accuracy of the THG-09 model is ± 8.4 cm, a precision previously not achieved in Turkey until this study.     

Generalized force vectors for multi‐mode pushover analysis

A generalized pushover analysis (GPA) procedure is developed for estimating the inelastic seismic response of structures under earthquake ground excitations. The procedure comprises applying different generalized force vectors separately to the structure in an incremental form with increasing amplitude until a prescribed seismic demand is attained for each generalized force vector. A generalized force vector is expressed as a combination of modal forces, and simulates the instantaneous force distribution acting on the system when a given response parameter reaches its maximum value during dynamic response to a seismic excitation. While any response parameter can be selected arbitrarily, generalized force vectors in the presented study are derived for maximum interstory drift parameters. The maximum value of any other response parameter is then obtained from the envelope of GPAs results. Each nonlinear static analysis under a generalized force vector activates the entire multi‐degree of freedom effects simultaneously. Accordingly, inelastic actions develop in members with the contribution of all ‘instantaneous modes’ in the nonlinear response range. Target seismic demands for interstory drifts at the selected stories are calculated from the associated drift expressions. The implementation of the proposed GPA is simpler compared with nonlinear response history analysis, whereas it is less demanding in computational effort when compared with several multi‐mode adaptive nonlinear static procedures. Moreover, it does not suffer from the statistical combination of inelastic modal responses obtained separately. The results obtained from building frames have demonstrated that GPA is successful in estimating maximum member deformations and member forces with reference to the response history analysis. When the response is linear elastic, GPA and response spectrum analysis produce identical results. Copyright © 2010 John Wiley & Sons, Ltd.     

On the <Emphasis Type="Italic">P</Emphasis> and <Emphasis Type="Italic">S</Emphasis> Receiver Functions Used for Inverting the One-Dimensional Upper Mantle Shear-Wave Velocities

The teleseismic P receiver functions are customarily inverted to attain the seismic velocities beneath a seismic station. Surface wave dispersion data are often added to reduce the effect of the non-uniqueness. The combination of P receiver function and surface wave works well in resolving the structures in the crust and uppermost mantle, but is less effective in characterizing greater (lithosphere and asthenosphere) depths due to the interference from crustal multiples. A solution to this problem is jointly to model teleseismic S receiver functions with surface wave and P receiver functions. This study adopts a fast, one-dimensional (1-D) inversion scheme. To avoid the effect of multidimensional structures away from the seismic station, we eliminate multiples that reverberate between the surface and interfaces below a restriction depth (RD), as well as S-to-P conversions below an inversion depth (ID). P-to-S conversions off the interfaces above the half-space and S-to-P conversions above the ID and multiples above the RD are properly modelled. This approach favours ray paths travelling close to stations and is, therefore, more suitable for 1-D inversions. We perform numerical experiments with and without noise and highlight the advantages of a joint receiver function and surface wave analysis.     

Provenance of the northern part of the Kahramanmaraş Peripheral Foreland Basin (Miocene,S Turkey)

The Miocene Kahramanmara? Peripheral Foreland Basin (KPFB) resemble to classic foreland basin model, with small differences. In the classic model, both the accretionary wedge and foredeep extend lengthways parallel to the plate margin. In addition, accretionary wedge includes wedge top basin or piggy back basin that extends parallel to foredeep. However, the accretionary wedge of the KPFB contains small half-graben type basins that obliquely intersect the plate margin between the Arabian Plate and the Anatolide–Taurides Platform (due to the irregular shape of the plate boundary). Tectonic lineaments controlled the shape and orientation of these basins and larger main depocentre of the KFPB, which were predominantly filled with deep-sea sediments. This paper focuses on the provenance of features of the KFPB, predominantly was fed from the northern basin margin, while also aiming to resolve the complex basin evolution that occurred during the Miocene.Clasts of Palaeozoic and Mesozoic limestone and ophiolites are common components of the confined deep-water clastic systems, which evolved as elongated trenches in the north-western sector of the KPFB during the Early-Middle Miocene. During the Middle Miocene, continuous thrusting of the northern basin margin to south caused depocentre migration to south-east, through the basin interior. At that time, the north-east and central depocentres of the KPFB were filled primarily by clasts of ophiolite and metamorphic units. The tectonic control on basin fill architecture can be observed anywhere in the KFPB. The principal tectonic features controlled the geometry and orientation of the canyon, the channel geometry of the deep-water slope on the northern basin margin, the frequency and distribution of slump-slide-debris flows and the overall pattern of sedimentation cycles in the stratigraphy of the slope and the central basin floor. Some basin sectors have continuously reactivated and as a result, different sediment entry points with substantial local accumulation of sediment and deformation have evolved on the slope and basin floor. Three scales of provenance were used to investigate the source rock: (a) field-based observation and analysis of conglomerate clasts, (b) modal analysis of sandstone facies and (c) geochemical analysis, all of which were in agreement.     

Interrelationship of TOC,As, Fe,Mn, Al and Si in shallow alluvial aquifers in Chapai-Nawabganj,Northwestern Bangladesh: implication for potential source of organic carbon

Two boreholes and ten piezometers in the Ganges flood plain were drilled and installed for collecting As-rich sediments and groundwater. Groundwater samples from the Ganges flood plain were collected for the analysis of cations (Ca²⁺, Mg²⁺, K⁺, Na⁺), anions (Cl⁻, NO₃ ⁻, SO₄ ²⁻), total organic carbon (TOC), and trace elements (As, Mn, Fe, Sr, Se, Ni, Co, Cu, Mo, Sb, Pb). X-ray powder diffraction was performed to characterize the major mineral contents of aquifer sediments and X-ray fluorescence (XRF) to analyze the major chemical composition of alluvial sediments. Results of XRF analysis clearly show that fine-grained sediments contain higher amounts of trace element because of their high surface area for adsorption. Relative fluorescence index (15–38 QSU) of humic substance in groundwater was measured using spectrofluorometer, the results revealed that groundwater in the Ganges flood plain contains less organic matter (OM). Arsenic concentration in water ranges from 2.8 to 170 μg/L (mean 50 μg/L) in the Ganges flood plain. Arsenic content in sediments ranges from 2.1 to 14 mg/kg (mean 4.58 mg/kg) in the flood plains. TOC ranges from 0.49 to 3.53 g/kg (mean 1.64 g/kg) in the Ganges flood plain. Arsenic is positively correlated with TOC (R ² = 0.55) in sediments of this plain. Humic substances were extracted from the sediments from the Ganges flood plain. Fourier transform infrared analysis of the sediments revealed that the plain contains less humic substances. The source of organic carbon was assigned from δ¹³C values obtained using elemental analysis-isotope ratio mass spectrometry (EA-IRMS); the values (−10 to −29.44‰) strongly support the hypothesis that the OM of the Ganges flood plain is of terrestrial origin.     

A GIS model for preliminary hazard assessment of swelling clays,a case study in Harran plain (SE Turkey)

Swelling behavior of clayey soils regarded as a hidden disaster, causes a great deal of damage in light hydraulic structures such as drinking water network, irrigation pipes or open canal linings through which water can easily leak and penetrate into soil during loading and unloading stages. Early identification during site investigation and laboratory testing is extremely important to ensure that the appropriate design strategy is adopted. The clay soils having swelling potential are generally found in arid and semi-arid regions, such as in the Şanlıurfa-Harran plain located in the southeast of Turkey. The problems associated with swelling clays occurred for the lightweight hydraulic structures constructed in Turkey have been met during the construction of irrigation structures in the scope of Southeast Anatolian Project as the Turkey’s greatest water resources project. Therefore, the identification of such soils and the assessment of their swelling potential parameters are necessary for hazard mitigation planning and land-use management. In this scope, extensive geotechnical study is executed for an investigation area. The samples were obtained from the Harran plain where many irrigation canal structures are constructed, and geotechnical study was performed on these samples. Atterberg limit tests often provide the basic field information to substantiate the soil’s swelling nature. The plasticity index (PI) and liquid limit (LL) values are also used extensively for classifying swelling soil and should always be determined during preliminary investigations. Because of this, LL and PI are assessed by using geographical information system (GIS)-based computer software, and LL and PI contour maps are created. Swelling percentages of the soil samples were carried out on both undisturbed and compacted soil samples by using direct methods. As a result of this extensive study, the values of swelling percentages determined for each location are used to obtain the swelling potential hazard map of the area by means of a GIS program. The results of GIS analyses for this area indicate that the analyses based on a lot of data introduce meaningful results for this study. It is expected that these maps will be a useful tool for planners and engineers in their efforts to achieve better land-use planning and to decide necessary remedial measures.     

Contribution of gravity and magnetic data in delineating the subsurface structure of Hammam Faroun area, Gulf of Suez, Egypt

The Hammam Faroun has a particular importance due to its geothermal activity which constitutes the main geothermal resource of Egypt. The area is located on the Sinai Peninsula, a subplate bounded by two seismically active structural zones along the Gulf of Suez and Gulf of Aqaba. High-resolution ground-based gravity and magnetic data are available for the entire Hammam Faroun area, acquired as part of a national project to explore for mineral, geothermal, and hydrocarbon resources. Gravity and magnetic data were analyzed using Source Edge Detection and Source Parameter Imaging (SPI) techniques to image subsurface structures. These analyses show that the area is characterized by a set of northwest-striking faults lying parallel to the Gulf of Suez. Orthogonal patterns are also present, possibly related to rifting of the Gulf of Suez. Depth analysis using the SPI method indicates that surface faults extend to 5-km depth. Analysis of potential-field data elucidates the structurally complex subsurface structure of the Hammam Faroun area.     

Trend and homogeneity analysis in temperature and rainfall series in western Black Sea region,Turkey

Theoretical and Applied Climatology - This paper includes a study which applied homogeneity and trend tests on time series of monthly mean temperature and monthly total rainfall recorded in the...