Systematic development of a new hysteretic damper based on torsional yielding: part I—design and development

Analytical and experimental studies into the behavior of a new hysteretic damper, designed for seismic protection of structures is presented in two papers. Although the subject matter of the papers is a specific system, they are also intended as an illustration of practical application of diverse engineering tools in systematic development of an anti‐seismic product. The Multi‐directional Torsional Hysteretic Damper (MTHD) is a recently patented invention in which a symmetrical arrangement of identical cylindrical steel energy dissipaters is configured to yield in torsion while the structure experiences planar movements due to earthquake shakings. The device has gone through many stages of design refinement, prototype verification tests and development of design guidelines and computer codes to facilitate its implementation in practice. The first of this two‐part paper summarizes the development stages of the new system, conceptual and analytical. The experimental phase of the research is the focus of the accompanying paper. The new device has certain desirable properties. Notably, it is characterized by a variable and controllable‐via‐design or adaptive post‐elastic stiffness. This feature gives the isolated structure the capability to evade the dominant period of the ground motion leading to reduced displacements while having force levels comparable to regular bilinear isolation systems. The device has already been applied to four major bridges. Copyright © 2015 John Wiley & Sons, Ltd.     

Systematic development of a new hysteretic damper based on torsional yielding: part II—experimental phase

This paper reports on experimental studies carried out on a 200 kN, 120 mm‐capacity prototype of the newly developed multidirectional torsional hysteretic damper for seismic protection of structures. The main goal of the experiments is to test the validity of the theory developed in a companion paper and to evaluate the low‐cycle fatigue performance of the energy dissipaters of the damper. Because the design and configuration of the damper allow easy replacement of the energy dissipaters, four sets of energy dissipaters were produced out of S355J2 + N, C45 (two sets), and 42CrMo4 + QT steel grades. Force–displacement response of the multidirectional torsional hysteretic damper is studied through fully reversed cyclic quasi‐static displacement‐controlled tests that were carried out in compliance with EN 15129. Following the verification tests, with the aim of studying fatigue and fracture behavior of the cylindrical energy dissipaters of the device, certain numbers of them were subjected to further cyclic tests up to failure, and observations on their fatigue/fracture behavior are reported. The experimental verification test results proved the validity of the developed theory and component design assumptions presented in a companion paper. Furthermore, the energy dissipaters exhibited excellent torsional low‐cycle fatigue performance with number of cycles to failure reaching 118 at a maximum shear strain of 8% for S355J2 + N steel grade. Copyright © 2015 John Wiley & Sons, Ltd.     

Assessment of excavatability,abrasivity and slope stability in a sandstone quarry in Istanbul,Turkey

The Cebeci region is characterized by outcrops of Carboniferous sandstone, including diabase dykes. This region is very important area for aggregate production in Istanbul, Turkey. The aim of this study is to determine the engineering geological properties of sandstones to assess the excavatability, abrasivity and stability of cut slopes in a quarry site. Firstly, the sandstone samples were used to determine their petrographical and mineralogical characteristics. Then, physico-mechanical tests were performed on these samples. In order to determine rock mass properties, scan-line surveys were performed, and the major orientations of discontinuities were analyzed through the stereographic projection technique. Kinematical analyses were also made to determine the potential failures at the quarry site. According to the results obtained, excavatability is changed from easy ripping to hard ripping on sandstones; the carbonated sandstone is less abrasive than other sandstones. Based on the field studies and stability analyses of the cut slopes, optimum slope geometry and necessary support measures, such as wire mesh and rock fall barriers, are suggested.     

Assessing seismic response of a 2D roller-compacted concrete dam under variable reservoir lengths

Finite element method (FEM) is effectively used for evaluating roller-compacted concrete (RCC) dams, especially in high seismicity zones. The aim of this study is to investigate the effect of various reservoir lengths on the seismic response of a selected RCC dam under strong ground motion effects. Six different reservoir lengths, the lengths varies from h/2 to 10h (h, the height of dam), are used within finite element models. The hydrodynamic pressure of the reservoir water is modelled with the 2D fluid finite elements based on the Lagrangian approach. The horizontal and vertical components of the 1989 Mw 6.9 Loma Prieta earthquake are utilized in numerical analyses. The non-linear time-history analyses of those six models are investigated by using Drucker-Prager material model. According to the numerical analysis, it is obvious that the seismic behavior of the RCC dams is considerably dependent on the reservoir length. By increasing the length, we have obtained higher displacement values, which exist until the reservoir length reaches the 3h; at increased lengths, the values remain stable. This result proposes that 3h reservoir length is adequate to assess the seismic response of RCC dams. The principal tensile stresses are relatively lower in non-linear analysis compared to linear analyses. However, the principal compression stresses are close to each other in linear and non-linear analyses. The results imply that the non-linear response is influential on the total seismic response of a dam, which cannot be neglected in numerical analysis.     

Water balance and water quality in the Çürüksu basin, western Turkey

The purpose of this study is to determine the hydrological properties, groundwater potential, and water quality of the Çürüksu basin, western Turkey, and to contribute to the efforts of providing an adequate water supply for the city of Denizli. To achieve these objectives, the study consisted of mapping the geology and hydrogeology, determining the water balance, and defining the water quality. The basement rock units in the study area include several impervious metamorphic rock types and Mesozoic karstic limestone, which are overlain by Oligocene fluvial and lacustrine strata, Pliocene travertine and limestone, and Quaternary alluvium. The karstic limestone and the travertine and limestone strata constitute potential aquifers in the Çürüksu basin. The discharge regimes of the 22 springs in the two basins show little change through the year. The flow systems of the springs also have a large storage capacity and drainage occurs very slowly. The discharge of the springs does not appear to be affected immediately by monthly variations in precipitation. According to the water balance, the precipitation in the Çürüksu basin cannot provide all of the measured surface runoff. Excess runoff is 2?m3?s–1 in the Çürüksu basin, and in the adjacent Gökp?nar basin the deficit in surface runoff is also 2?m3?s–1. Thus, the underground catchment area of the springs extends beyond the surface drainage area of the Çürüksu basin. Although the P?narba??, Kazanp?nar, and Böceli springs emerge from the karstic limestone aquifer in the Çürüksu basin, these springs are fed from the adjacent Gökp?nar basin. The spring waters emerging from karstic limestone are fresh, of the calcium bicarbonate type, soft, and potable. The spring waters emerging from the travertine and limestone aquifer are low-temperature, brackish, of the calcium sulfate type, very hard, and not potable but useful for the irrigation. The occurrences of coal strata and hydrothermal activity have caused some deterioration of groundwater quality.     

Comparison of Treatment Efficiency and Energy Consumption of Batch and Continuous Electrocoagulation in Urban Wastewater

In this study, domestic wastewater was used as the electrolyte. The work was carried out with an up-flow tubular reactor, made of stainless steel that was used as cathode, while the anode electrode material was aluminum and varying values of flow regime (25, 50, 75 and 100 mL/s for continuous system), initial pH value (5, 6, 7 and 7.8) and current intensity (10, 15 and 20 A) were applied. For domestic wastewater with natural pH, the effluent pH was >9 in the batch system, while in the continuous system the pH was 8–8.5. Likewise, while the effluent temperature was up to 60°C in the batch system, it was at most 35°C in the continuous system. However, the energy consumption values in the continuous system were considerably lower compared with the batch system. At a current intensity of 10 A, 80 kWh of energy per unit volume was consumed in the batch system, while it was 50 kWh for the continuous system. The present results show that the batch system can be used for small wastewater streams whereas the continuous system can be used for large wastewater streams for domestic wastewater treatment.     

Dynamics of a complex mass movement triggered by heavy rainfall: a case study from NW Turkey

Following a period of heavy precipitation, a large and complex mass movement, namely the Dagkoy landslide, occurred in the West Black Sea Region of Turkey on May 21, 1998. This paper describes the conditioning factors of the landslide and interprets the mass transport processes in terms of a movement scenario. Geology, geomorphology and vegetation cover were considered as the conditioning factors of the failure. Observations showed that the gently sloping (about 10°) area is mostly covered by dense forest trees at the crown where the motion initiated. Significant intersection of the collapsed slope with dip of the local marls seems to have contributed to the formation and geometry of the landslide. The distance from the crown down to the toe of the landslide measured more than 600 m, with about 0.6 km³ total earth material displaced. The landslide has both a block sliding characteristics in the upper portions and a debris flow/soil flow component around the margins of the sliding blocks in the middle parts and at the toe. The proposed scenario for the landslide reveals that the movement was initiated near crown as a result of the excess water content in the marls at the end of 3 days of heavy rainfall. The early perturbations (transverse cracks, ridges, etc.) lasted for 6–7 h, after which the central part of the zone started to move as a soil flow in which very large intact blocks were transported. Even though the movement was very rapid (1.2 m/min), there was no loss of life. However, the movement destroyed 38 houses, one mosque and a considerable amount of farmland.     

The collision experiment between rolling stones of different shapes and protective cushion in open-pit mines

Though gravel cushions are used worldwide in open-pit mines and railway slopes to control the impact of rolling stones, no universal technical standards have been put in place to guide engineers in their correct design, and few laboratory test results are available with which to characterize collisions between rolling stones and a gravel cushion. We carried out a large number of experiments in which rolling stones made of the same material but differently shaped were dropped from various heights onto cushions with various particle sizes and thicknesses. We investigated the characteristics of the resulting collisions, and the relationships between coefficients of restitution(CORs) of blocks with different shape and release height H, cushion thickness h and particle diameter d are obtained through linear fitting method. Orthogonal testing reveals the relative influence of block shape, release height, and the particle size and thickness of the cushion on the collision characteristics, which can assist engineers in designing a gravel cushion suitable to the distribution and weathering characteristics of rolling stones in a specific area.     

Effects of T-shape groin parameters on beach accretion

The effects of various groin parameters (length, head length and opening) and wave parameters (wave height, wave period and wave angle) on the accretion of the area protected by T-shape groins are studied in a physical model. The model studies are performed using regular waves in a basin. A numerical model which depends primarily on a CERC model is employed to examine the effects of some of the above parameters. Good agreement is found in the results of physical and numerical models. The results of a numerical model are compared with field data obtained by deep sounding measurements at Of coasts, Trabzon Province, Turkey. The finding from this study may be employed in designing T-shape groins.