GIS-based high-resolution spatial interpolation of precipitation in mountain–plain areas of Upper Pakistan for regional climate change impact studies

In this study, the baseline period (1960–1990) precipitation simulation of regional climate model PRECIS is evaluated and downscaled on a monthly basis for northwestern Himalayan mountains and upper Indus plains of Pakistan. Different interpolation models in GIS environment are used to generate fine scale (250?×?250 m²) precipitation surfaces from PRECIS precipitation data. Results show that the multivariate extension model of ordinary kriging that uses elevation as secondary data is the best model especially for monsoon months. Model results are further compared with observations from 25 meteorological stations in the study area. Modeled data show overall good correlation with observations confirming the ability of PRECIS to capture major precipitation features in the region. Results for low and erratic precipitation months, September and October, are however showing poor correlation with observations. During monsoon months (June, July, August) precipitation pattern is different from the rest of the months. It increases from south to north, but during monsoon maximum precipitation is in the southern regions of the Himalayas, and extreme northern areas receive very less precipitation. Modeled precipitation toward the end of the twenty-first century under A2 and B2 scenarios show overall decrease during winter and increase in spring and monsoon in the study area. Spatially, both scenarios show similar pattern but with varying magnitude. In monsoon, the Himalayan southern regions will have more precipitation, whereas northern areas and southern plains will face decrease in precipitation. Western and south western areas will suffer from less precipitation throughout the year except peak monsoon months. T test results also show that changes in monthly precipitation over the study area are significant except for July, August, and December. Result of this study provide reliable basis for further climate change impact studies on various resources.     

Understanding of Petobo liquefaction flowslide by 2018.09.28 Palu-Donggala Indonesia earthquake based on site reconnaissance

Landslides - The Palu-Donggala earthquake struck Palu city of Sulawesi island, Indonesia, on 28 September 2018. A large-scale liquefaction phenomena occurred in some areas which caused massive...     

Investigation of landslides with natural lineaments derived from integrated manual and automatic techniques applied on geospatial data

Lineament extraction has long been performed through extensive field mapping. Recent advances in the field of remote sensing have made possible the availability of imageries from earth observation satellites with different Spatio-temporal resolutions, paving way for new automatic, semi-automatic, and manual techniques for the extraction of natural lineaments. The study focuses on the extraction of lineaments representing tectonic fault zones; the lineaments are extracted automatically and semi-automatically/manually. Results show that indirect information about the tectonic lineaments can be derived through automatic techniques whereas, the semi-automatic techniques are more effective to directly identify them. Detailed analyses of lineaments and landslides revealed that areas near lineaments, in general, experienced higher frequency of landslides. Moreover, it is also observed that lineaments are not the only factor that affects landslide density; other parameters like slope and lithology were also found to be the controlling factors in determining the spatial landslide distribution. Lastly, some recommendations have been made based on observations.

     

Identification of the Phytoremediation Potential of Indian mustard Genotypes for Copper,Evaluated from a Hydroponic Experiment

The effectiveness of 10 Indian mustard (Brassica juncea L.) genotypes (viz. Agrani, BTO, Kranti, Pusa Bahar, Pusa Basant, Pusa Bold, Pusa Jai Kisan, Vaibhav, Vardhan, and Varuna) were evaluated for their potential to phytoremediate copper from contaminated waters under laboratory controlled conditions. The genotypes were grown for 20 days in aqueous solutions containing various concentrations of copper sulfate (0–50 µM) in a hydroponic chamber. Throughout plant development, changes in growth variables, biomass accumulation, and total Cu content were evaluated. The results suggested that Indian mustard cv. Pusa Jai Kisan possesses the best capacities of Cu sequestration and tolerance amongst all the genotypes studied. Thus, Pusa Jai Kisan has the greatest potential to become a viable candidate in the development of practical phytoremediation technologies for Cu contaminated sites.     

Green and Eco‐Friendly Removal of Mycotoxins with Organo‐Bentonites; Isothermal,Kinetic, and Thermodynamic Studies

In the current study the application of organo‐modified bentonite for the adsorption of mycotoxins (aflatoxin B1, citrinin, patulin, and zearalenone) is presented. The modification of clays is carried out using benzyl‐tri‐n‐butyl ammonium bromide (BTB), benzethonium chloride (BTC), and dioctyl sodium sulfosuccinate (DSS). Various experimental parameters such as pH, time, adsorbent dose, and mycotoxins concentration are thoroughly studied. The modified clays (B‐BTB, B‐BTC and B‐DSS) are characterized by X‐ray fluorescence, X‐ray diffraction, and Fourier transform infrared spectroscopy. The results depicted the high detoxification efficiency (≈99%) of modified clays for the removal of mycotoxins under optimized conditions (pH 5, time: 30 min, adsorbent amount: 50 mg). The adsorption capacities of modified clays are found in the order of: B‐BTC (AFB1: 18.02, CIT: 18.35, PAT: 18.21, ZEA: 18.09 mg g^?1) > B‐BTB (AFB1: 17.7, CIT: 18.11, PAT: 17.95, ZEA: 17.90 mg g^?1) > B‐DSS (AFB1: 17.5, CIT: 18.02, PAT: 17.86, ZEA: 17.80 mg g^?1). The obtained results fitted well with thermodynamic, isothermal (Langmuir) and pseudo‐second order kinetics. Low cost organo‐modified bentonite shows the promise in mitigating mycotoxin contamination, which could improve food safety and reduce environmental contamination.     

Characterization of polychlorinated biphenyls and brominated flame retardants in sediments from riverine and coastal waters of Surabaya, Indonesia

A total of 33 surficial sediments from riverine and coastal waters from Surabaya, Indonesia were analyzed for PCBs and BFRs. Concentrations of PCBs (62 congeners), PBDEs (14 congeners) and HBCDs (3 isomers) varied from <DL-420, <DL-35 and <DL-5.4 ng g⁻¹ dw, respectively. Higher concentrations of these compounds were found in riverine than coastal sediments. Their levels and distribution were influenced by proximity to the point sources and TOC. The predominant congeners were CB-153, -28, -138, -149, -180, -33 and BDE-209, -207, -206, -197, -196, -183, -99, -47 for PCBs and PBDEs, respectively, and γ-isomer for HBCDs. Debromination of BDE-209 might be taking place producing lower toxic congeners in sediment. Levels of PCBs in riverine sediments were comparable with some polluted areas worldwide, but PBDEs and HBCDs were lower. Hazard assessment of PCBs indicated possible toxic potential, particularly in areas close to point sources.     

Simultaneous perturbation stochastic approximation for tidal models

The Dutch continental shelf model (DCSM) is a shallow sea model of entire continental shelf which is used operationally in the Netherlands to forecast the storm surges in the North Sea. The forecasts are necessary to support the decision of the timely closure of the moveable storm surge barriers to protect the land. In this study, an automated model calibration method, simultaneous perturbation stochastic approximation (SPSA) is implemented for tidal calibration of the DCSM. The method uses objective function evaluations to obtain the gradient approximations. The gradient approximation for the central difference method uses only two objective function evaluation independent of the number of parameters being optimized. The calibration parameter in this study is the model bathymetry. A number of calibration experiments is performed. The effectiveness of the algorithm is evaluated in terms of the accuracy of the final results as well as the computational costs required to produce these results. In doing so, comparison is made with a traditional steepest descent method and also with a newly developed proper orthogonal decomposition-based calibration method. The main findings are: (1) The SPSA method gives comparable results to steepest descent method with little computational cost. (2) The SPSA method with little computational cost can be used to estimate large number of parameters.     

A Numerical Study of Effects of Valley-Weathering and Valley-Shape-Ratio on the Ground Motion Characteristics

A study of combined effects of valley-weathering and valley-shaperatio on the ground motion characteristics and associated differential ground motion (DGM) is documented in this paper. In order to properly quantify the weathering effects, a forth-order-accurate staggered-grid viscoelastic time-domain finite-difference program has been used for the simulation of SH-wave responses. Simulated results revealed that the defocusing caused by valley is frequency-independent in contrast to the ridge-focusing. A decrease of average spectral amplification (ASA) with an increase of shape-ratio of the non-weathered triangular and elliptical valleys was obtained. Overall, the amplification and de-amplification pattern was larger in case of triangular valleys as compared to the elliptical valleys. It can be concluded that the dwelling within or near the topcorners of weathered valleys may suffer more damage as compared to their surroundings. A weathered triangular valley with large shape-ratio may cause unexpected damage very near its top-corners since both the ASA and DGM are largest.     

Initiation of a convective dust storm over North India on 21 April 2010 inferred using satellite data

Dust storms commonly occur during the pre-monsoon (summer) season in north and northwest parts of India. Characteristics of dust events of the pressure gradient type are well understood. However, comprehensive studies on mechanism of convective dust storms in India are few. A convective dust storm which occurred on 21 April 2010 in association with a western disturbance over North India was hence studied. In the absence of in situ data, we used available satellite data to study the event. Dust storm that occurred on 20 April 2010 on the surface of the Thar Desert transported dust to northern and northwestern parts of India (Rajasthan, Haryana, Delhi and some parts of Uttar Pradesh). This formed a background of aerosols that affected the thunderstorm formed in association with western disturbance and the strong updraft in the thunderstorm carried the dust lingering in the atmosphere to higher altitudes. Large amount of aerosols carried to higher altitude suppressed the chance of precipitation by affecting the cloud top microphysics. Enhancement in evaporation due to an increase in aerosol concentration and strong downdrafts during dissipation of the thunderstorm resulted in emission of dust particles which led to the convective dust event of 21 April 2010.     

Across‐axis variations in petrophysical properties of the North Porcupine Basin,offshore Ireland: New insights from long‐streamer traveltime tomography

The Porcupine Basin is a Mesozoic failed rift located in the North Atlantic margin, SW of Ireland, in which a postrift phase of extensional faulting and reactivation of synrift faults occurred during the Mid–Late Eocene. Fault zones are known to act as either conduits or barriers for fluid flow and to contribute to overpressure. Yet, little is known about the distribution of fluids and their relation to the tectono‐stratigraphic architecture of the Porcupine Basin. One way to tackle this aspect is by assessing seismic (V_p) and petrophysical (e.g., porosity) properties of the basin stratigraphy. Here, we use for the first time in the Porcupine Basin 10‐km‐long‐streamer data to perform traveltime tomography of first arrivals and retrieve the 2D V_p structure of the postrift sequence along a ~130‐km‐long EW profile across the northern Porcupine Basin. A new V_p–density relationship is derived from the exploration wells tied to the seismic line to estimate density and bulk porosity of the Cenozoic postrift sequence from the tomographic result. The V_p model covers the shallowest 4 km of the basin and reveals a steeper vertical velocity gradient in the centre of the basin than in the flanks. This variation together with a relatively thick Neogene and Quaternary sediment accumulation in the centre of the basin suggests higher overburden pressure and compaction compared to the margins, implying fluid flow towards the edges of the basin driven by differential compaction. The V_p model also reveals two prominent subvertical low‐velocity bodies on the western margin of the basin. The tomographic model in combination with the time‐migrated seismic section shows that whereas the first anomaly spatially coincides with the western basin‐bounding fault, the second body occurs within the hangingwall of the fault, where no major faulting is observed. Porosity estimates suggest that this latter anomaly indicates pore overpressure of sandier Early–Mid Eocene units. Lithological well control together with fault displacement analysis suggests that the western basin‐bounding fault can act as a hydraulic barrier for fluids migrating from the centre of the basin towards its flanks, favouring fluid compartmentalization and overpressure of sandier units of its hangingwall.