Flood hazard assessment and mapping of River Swat using HEC-RAS 2D model and high-resolution 12-m TanDEM-X DEM (WorldDEM)

Natural Hazards - Floods are among the most devastating and recurring natural hazards and have caused extensive economic losses to human lives and infrastructures around the world. Swat valley in...     

Geological and Geochemical Characteristics of Gold Mineralization in the Salu Bulo Prospect,Sulawesi, Indonesia

The Salu Bulo prospect is one of the gold prospects in the Awak Mas project in the central part of the western province, Sulawesi, Indonesia. The gold mineralization is hosted by the meta‐sedimentary rocks intercalated with the meta‐volcanic and volcaniclastic rocks of the Latimojong Metamorphic Complex. The ores are approximately three meters thick, consisting of veins, stockwork, and breccias. The veins can be classified into three stages, namely, early, main, and late stages, and gold mineralization is related to the main stage. The mineral assemblage of the matrix of breccia and the veins are both composed of quartz, carbonate (mainly ankerite), and albite. High‐grade gold ores in the Salu Bulo prospect are accompanied by intense alteration, such as carbonatization, albitization, silicification, and sulfidation along the main stage veins and breccia. Alteration mineral assemblage includes ankerite ± calcite, quartz, albite, and pyrite along with minor sericite. Pyrite is the most abundant sulfide mineral that is spatially related to native gold and electrum (<2–42 μm in size). It is more abundant as dissemination in the altered host rocks than those in veins. This suggests that water–rock interaction played a role to precipitate pyrite and Au in the Salu Bulo prospect. The Au contents of intensely altered host rocks and ores have positive correlations with Ag, Ni, Mo, and Na. Fluid inclusions in the veins of the main stage and the matrix of breccia are mainly two‐phase liquid‐rich inclusions with minor two‐phase, vapor‐rich, and single‐phase liquid or vapor inclusions. CO₂ and N₂ gases are detected in the fluid inclusions by Laser Raman microspectrometry. Fluid boiling probably occurred when the fluid was trapped at approximately 120–190 m below the paleo water table. δ¹⁸O_SMOW values of fluid, +5.8 and +7.6‰, calculated from δ¹⁸O_SMOW of quartz from the main stage vein indicate oxygen isotopic exchange with wall rocks during deep circulation. δ³⁴S_CDT of pyrite narrowly ranges from ?2.0 to +3.4‰, suggesting a single source of sulfur. Gold mineralization in the Salu Bulo prospect occurred in an epithermal condition, after the metamorphism of the host rocks. It formed at a relatively shallow depth from fluids with low to moderate salinity (3.0–8.5 wt% NaCl equiv.). The temperature and pressure of ore formation range from 190 to 210°C and 1.2 to 1.9 MPa, respectively.     

Number Counts,Confusion, Mapping Issues,and Sky Coverage Analysis for Radio Continuum Surveys through Emu Early Science,EMU-ASKAP,and WODAN Especially for Cosmology Science Goals

In this study, we discuss the challenges radio astronomers face while observing radio continuum sources. We consider issues related to rms noise, confusion, position accuracy, shot noise and how these issues affect observation results, data analysis and the science goals we are trying to achieve. We mainly focus on the Evolutionary Map of the Universe (EMU-ASKAP) sky survey, EMU Early science survey and Westerbork Observations of the Deep APERTIF Northern sky (WODAN). The study will also be useful for future surveys like with possible continuum surveys through MeerKAT (e.g., MIGHTEE) and SKA-1. The late time Integrated Sachs-Wolfe (ISW) effect detection is one of the major areas of research related to dark energy cosmology. We will particularly discuss how technical, data analysis and mapping issues, affect galaxy over/under density dependent science goals like the detection of the late time Integrated Sachs-Wolfe (ISW) effect through wide-field radio continuum surveys.

     

An estimation of the height system bias parameter <Emphasis Type="Italic">N</Emphasis><Subscript>0</Subscript> using least squares collocation from observed gravity and GPS-levelling data

This paper deals with the analysis of gravity anomaly and precise levelling in conjunction with GPS-Levelling data for the computation of a gravimetric geoid and an estimate of the height system bias parameter N_o for the vertical datum in Pakistan by means of least squares collocation technique. The long term objective is to obtain a regional geoid (or quasi-geoid) modeling using a combination of local data with a high degree and order Earth gravity model (EGM) and to determine a bias (if there is one) with respect to a global mean sea surface. An application of collocation with the optimal covariance parameters has facilitated to achieve gravimetric height anomalies in a global geocentric datum. Residual terrain modeling (RTM) technique has been used in combination with the EGM96 for the reduction and smoothing of the gravity data. A value for the bias parameter N_o has been estimated with reference to the local GPS-Levelling datum that appears to be 0.705 m with 0.07 m mean square error. The gravimetric height anomalies were compared with height anomalies obtained from GPS-Levelling stations using least square collocation with and without bias adjustment. The bias adjustment minimizes the difference between the gravimetric height anomalies with respect to residual GPS-Levelling data and the standard deviation of the differences drops from 35 cm to 2.6 cm. The results of this study suggest that N_o adjustment may be a good alternative for the fitting of the final gravimetric geoid as is generally done when using FFT methods.     

Microfacies and Depositional Environments of Miocene Isolated Carbonate Platforms from Central Luconia, Offshore Sarawak, Malaysia

The Luconia Province – offshore Sarawak – is a key geological unit for understanding the distribution of hydrocarbon resources in Malaysia. Nevertheless, little effort has been made to address the palaeoenvironmental characteristics of the Tertiary carbonates in the key sector of Central Luconia. We study the sedimentology and petrography of core samples from a well in Central Luconia, for which thirteen microfacies have been identified reflecting different depositional settings. This is the first microfacies scheme elaborated for Luconian carbonates. Lithofacies and microfacies distribution are compatible with deposition in a reef complex, originating around a framework reef, within the euphotic zone. Sediments were deposited in environments of backreef, reef crest, and forereef. The fair weather wave base is marked by the presence of coralline red algae, foraminifera, decreasing degree of bioclast fragmentation and other microfacies features. As a result, a depositional-environmental model is constructed, depicting a reef complex built around a framework reef developed on the margin of an isolated platform. In addition, an innovative, preliminary time series analysis of facies, microfacies and depositional environment data reveal the existence of seasonal cycles in the stacking patterns of facies and microfacies.     

Petrography,provenance, diaganesis and depositional environment of Murree Formation in Jhelum Valley,Sub Himalayas,Azad Jammu and Kashmir,Pakistan

The clastic sediments of the Murree Formation of Miocene age are exposed in Jhelum valley areas of Azad Jammu and Kashmir Pakistan. Field observations revealed the cyclic deposition in the Murree Formation. The sandstone, siltstone, and shale constitute a single cycle within the formation. This single unit is divided into five different lithofacies which constitute the Bouma sequence in the Murree Formation. The Murree Formation shows faulted contacts with Panjal Formation and Nagri Formation in the study area. The modal mineralogy data obtained from the petrography of sandstone indicates that sandstone is litharenite and lithic greywacke. The mineralogical and textural data suggests that sandstone is compositionally mature and poorly to moderately sorted. The dominantly angular to sub angular quartz grains show nearness of the source area. Fractured and sutured quartz grain reveals tectonodiagentic changes that occurred in Murree Formation. The sandstone experienced diagenetic changes. The pressure solution and cementation reduced the primary porosity of sandstone. However, alteration of feldspar and fractures in grains have produced secondary porosity. The X-ray diffraction (XRD) of the shale samples indicates that shale of the Murree Formation is argillaceous and dominated by illite clay mineral. The illite crystallinity values indicate very low grade metamorphism of Murree Formation in core of Hazara Kashmir Syntaxis. The petrographic data suggests that the provenance of sandstone is recycled orogen. Quartz is of igneous and metamorphic origin. Feldspar (albite and microcline) composition suggests its derivation from acidic igneous rocks. The rock fragments of volcanics, slate, phyllite, and schist suggest igneous and metamorphic provenance. The petrographic data suggests that at the time of deposition of Murree Formation, igneous and low grade metamorphic rocks were exposed. However, presence of some clasts of carbonates indicates that sedimentary rocks were also exposed in the source region. The quartz content and clay minerals in the shale revealed that source region was igneous and metamorphic rocks. Cyclic deposition, lithofacies, and various sedimentary structures like cross bedding, ripple marks, and calcite concretions suggest that deposition of Murree Formation occurred in fluviatile environment by meandering river system having decreasing turbidity current.     

Robust approach for optimal positioning and ranking potential rainwater harvesting structure (RWH): a case study of Iraq

Rainwater harvesting (RWH) structure is considered as the best solution to conserve water for arid regions. The selection of RWH location is based on several key determinants such as hydrology, environment, topography, and socio-economic. This study proposed a robust methodology to identify and select the location of RWH using geographical information systems (GIS) and remote sensing (RS) with multi-criteria decision techniques in areas where data are scarce. Several thematic maps were extracted such as vegetation cover, soil group, slope, land use, and digital elevation (DEM). The RWH sites were ranked based on four major indexes: evaporation, cost-benefit, sediment, and hydrological index. Sensitivity analysis shows that the variance inverse (VI) and rank order method (ROM) considered all indices that effect ranking as compared to the analytic hierarchy process (AHP) and fuzzy-AHP. Sensitivity analysis also proved that the proposed method is suitable to be used for RWH site selection in arid regions.     

Debris flow susceptibility analysis based on the combined impacts of antecedent earthquakes and droughts: a case study for cascade hydropower stations in the upper Yangtze River,China

The upper Yangtze River region is one of the most frequent debris flow areas in China. The study area contains a cascade of six large hydropower stations located along the river with total capacity of more than 70 million kilowatts. The purpose of the study was to determine potential and dynamic differences in debris flow susceptibility and intensity with regard to seasonal monsoon events. We analyzed this region’s debris flow history by examining the effective peak acceleration of antecedent earthquakes, the impacts of antecedent droughts, the combined effects of earthquakes and droughts, with regard to topography, precipitation, and loose solid material conditions. Based on these factors, we developed a debris flow susceptibility map. Results indicate that the entire debris flow susceptibility area is 167,500 km², of which 26,800 km² falls within the high susceptibility area, with 60,900 km² in medium and 79,800 km² are in low susceptibility areas. Three of the six large hydropower stations are located within the areas with high risk of debris flows. The synthetic zonation map of debris flow susceptibility for the study area corresponds with both the investigation data and actual distribution of debris flows. The results of debris flow susceptibility provide base-line data for mitigating, assessing, controlling and monitoring of debris flows hazards.     

Assessment of sea water inundation along Daboo creek area in Indus Delta Region,Pakistan

Indus Deltaic Region (IDR) in Pakistan is an erosion vulnerable coast due to the high deep water wave energy. Livelihood of millions of people depends on the fisheries and mangrove forests in IDR. IDR consists of many creeks where Daboo is a major creek located at southeast of the largest city of Pakistan, Karachi. Unfortunately, there has been no detailed study to analyze the damages of sea water intrusion at a large temporal and spatial scale. Therefore, this study is designed to estimate the effects of sea water inundation based on changing sea water surface salinity and sea surface temperature (SST). Sea surface salinity and SST data from two different surveys in Daboo creek during 1986 and 2010 are analyzed to estimate the damages and extent of sea water intrusion. Mean salinity has increased 33.33% whereas mean SST decreased 13.79% from 1987 to 2010. Spatio-temporal analysis of creek area using LANDSAT 5 Thematic mapper (TM) data for the years 1987 and 2010 shows significant amount of erosion at macro scale. Creek area has increased approximately 9.93% (260.86 m² per year) which is roughly equal to 60 extensive sized shrimp farms. Further Land Use Land Cover (LULC) analyses for years 2001 and 2014 using LANDSAT 7 Enhanced Thematic Mapper Plus (ETM+) has indicated 42.3% decrease in cultivated land. Wet mud flats have spread out at the inner mouth of creek with enormous increase of 123.3%. Significant sea water intrusion has increased the area of barren land by 37.9%. This also resulted in overall decrease of 6.7% in area covered by mangroves. Therefore, this study recorded a significant evidence of sea water intrusion in IDR that has caused serious damages to community living in the area, economical losses. Additionally, it has also changed the environment by reducing creek biological productivity as reported by earlier studies over other regions of the world.     

Place,identity and stigma: blocks and the ‘blockies’ of Tara,Queensland, Australia

This article explores the role of geographical context in generating a stigmatised identity among residents of Tara rural subdivisions in the coal seam gas fields in Queensland’s Western Downs. The research was based on qualitative interviews with Tara ‘Blockies’, as these residents are commonly referred to, that revealed how their existence in the middle of an agrarian region resulted in the assignation of a stigma that has marked them as different, and subsequently devalued their status. We explain that this distinction and category division of the normals, referring to Tara’s Agrarian residents, from the ‘stigmatised’ led to an antagonistic relationship that prevented successful socio-cultural assimilation. We demonstrate how an immoral place becomes disadvantaged, resulting in poor well-being, and how imposed labels threaten the self-esteem of its occupants.