Sediment yield assessment and identification of check dam sites for Rawal Dam catchment

Sediment yield is the amount of erosional debris from drainage basin deposited in reservoirs. The economic life of storage reservoir depends upon the estimation of the time it takes for the reservoir to be filled with the deposition of sediments. This research is based on assessing the sediment yield in Rawal Dam catchment by using Soil and Water Assessment Tool (SWAT) model. Digital Elevation Model (DEM), land use maps, soil maps, and weather data of the study watershed were used as input to SWAT model. Monthly sedimentation data of year 2010 and discharge data from 1998 to 2005 is being used for model calibration and validation, respectively. Whereas simulations are being generated from 1998 to 2011 for both sedimentation and discharge. Modified Universal Soil Loss Equation (MUSLE) was used for the estimation of sediment yield. The Nash and Sutcliffe coefficient of the model was found to be 0.79 which depicts its effectiveness. After the estimation of the sediment yield and discharge by using SWAT model, double mass curve was used to evaluate the sedimentation rate. The rate of sediment transport can be reduced by the construction of check dams. Various sites have also been proposed for check dams construction to prevent the sediments transported into the Rawal Catchment.     

Geochemistry and petrology of Late Miocene-Pleistocene Dibdibba sandstone formation in south and central Iraq: implications for provenance and depositional setting

Major, trace, and some rare earth element compositions in clastic sediments of the Dibdibba Formation (Late Miocene-Pleistocene) in central and southern Iraq have been investigated to describe the sedimentary environment and provenance. These sediments are classified as subarkosic to arkosic with few sublithic arenite, lithic arenite, and gray wacke; they are mainly composed of quartz (Q) followed by feldspar (F) and rock fragments (L) with a petrologic composition of Q73-F21-L6. The Arabian Shield is a probable source of the studied sediments which are derived from multi-sources including igneous rocks (felsic to mafic) and metamorphic rocks and were transported by river currents towards the northeast. Eventually, the clastic sediments were deposited in a fluviatile environment covering a wide area in Saudi Arabia, Kuwait, Qatar, and Iraq during the Late Miocene-Pleistocene. They were developed on a passive continental margin under a semi-humid climate alternating with drought periods. The grain size analysis indicates that Basra in the south of Iraq is close to the source, but Karbala and Najaf in central Iraq are farthest from the source.     

Prediction of pore-water pressure response to rainfall using support vector regression

Nonlinear complex behavior of pore-water pressure responses to rainfall was modelled using support vector regression (SVR). Pore-water pressure can rise to disturbing levels that may result in slope failure during or after rainfall. Traditionally, monitoring slope pore-water pressure responses to rainfall is tedious and expensive, in that the slope must be instrumented with necessary monitors. Data on rainfall and corresponding responses of pore-water pressure were collected from such a monitoring program at a slope site in Malaysia and used to develop SVR models to predict pore-water pressure fluctuations. Three models, based on their different input configurations, were developed. SVR optimum meta-parameters were obtained using k-fold cross validation and a grid search. Model type 3 was adjudged the best among the models and was used to predict three other points on the slope. For each point, lag intervals of 30 min, 1 h and 2 h were used to make the predictions. The SVR model predictions were compared with predictions made by an artificial neural network model; overall, the SVR model showed slightly better results. Uncertainty quantification analysis was also performed for further model assessment. The uncertainty components were found to be low and tolerable, with d-factor of 0.14 and 74 % of observed data falling within the 95 % confidence bound. The study demonstrated that the SVR model is effective in providing an accurate and quick means of obtaining pore-water pressure response, which may be vital in systems where response information is urgently needed.     

Surface recovery of landslides triggered by 2008 <Emphasis Type="Italic">Ms</Emphasis>8.0 Wenchuan earthquake (China): a case study in a typical mountainous watershed

The Ms8.0 Wenchuan earthquake that occurred on 12 May 2008 in southwestern China and triggered numerous landslides is one of the stronger ones in the steep eastern margins of the Tibetan Plateau. The surfaces of these landslides have recovered gradually with vegetation, which provide useful information about the evolution of geologic environment as well as the long-term assessment of landslides after earthquake. The Mianyuanhe watershed shows many co-seismic landslides. The active fault passing through its center is selected as a study area aiming to analyze the annual surface recovery rate (SRR) of landslides by interpretation of remote-sensing images in five periods from 2008 to 2013. The results are here described. (1) Although a large amount of loose deposits were transformed into debris flows, the surfaces of the landslides recovered rapidly with vegetation and almost no landslides occurred at new sites after the Wenchuan earthquake. In the year 2008, the exposed surface projected area (ESPA) of the landslides showed a total area of 56.3 km² and covered 28.9 % of the study area, which was reduced rapidly to 19.1 % in 2011 and 15.8 % in 2013. (2) The study area was divided into four geologic units, including clastic rocks, melange zone, carbonate rocks, and magmatic rocks. Smaller ESPAs and higher SRRs were found in the former two units versus the latter ones. (3) A single large landslide shows an SRR lower than a group of smaller ones having an equal total surface, while the SRRs of debris flows are lower than those of rockfalls and landslides. (4) The vegetation cover would return to the pre-earthquake level in 2020 approximately, which indicates that the impact of the Wenchuan earthquake on landslides and debris-flows activities would cease almost completely.     

Using fluorescein and bromide tracers to investigate the role of baseflow in a small suburban watershed in Iowa,USA

Fluorescein and bromide tracers were used to study baseflow mechanisms of a small suburban watershed in northeast Iowa, USA. The tracers were applied to ten injection holes ranging from 1.3 to 3.0 ft in depth in two phases. Separately, two PVC wells (15 and 16 ft deep) were used to investigate tracer movement in a deeper flow system. Over 30 days of phase 1, none of the tracers was detected in the creek water. In phase 2, fluorescein was irregularly detected in the creek at two sites, whereas bromide was detected at one site only. Meanwhile, soil analysis detected measurable diffusion of bromide and fluorescein at four sites. At each of these sites, the tracer was found to be diffusing toward the creek. None of the tracers applied to the deeper PVC wells showed any movement toward the creek over 1 month of continuous sampling. Isotopic composition of water samples varied spatially as well as temporally going from the deep well (δ¹⁸O = ?8.89‰) to the injection holes (average δ¹⁸O = ?8.42‰), to the creek (average δ¹⁸O = ?7.86‰), and further to the rain samples (average δ¹⁸O = ?4.68‰). The analytical error margin is ±0.09‰. Samples from the injection holes were generally heavier than the deep well sample and lighter than the creek samples, indicating that there was no significant connection between the surface and the subsurface systems. Furthermore, the sporadic appearance of bromide and fluorescein both spatially and temporally points to the fact that baseflow does not constitute a significant part of the area's stream discharge. Copyright © 2014 John Wiley & Sons, Ltd.     

Discovery of antler from a new site in the Pinjor Formation (Pleistocene) of Pakistan

Partially complete right antler from the Pinjor Formation (Pleistocene) of the Upper Siwalik Subgroup is identified, described and its phylogenetic relationship is discussed. The fossil antler is compared with other known fossil records of family Cervidae as well as with the extant species, on the basis of which it can be attributed to Axis punjabiensis. This species has not been reported previously from this fossil site.