Hydrothermal alteration and evolution of Zr-Th-U-REE mineralization in the microgranite of Wadi Ras Abda,North Eastern Desert,Egypt

Ras Abda plutonic suite, North Eastern Desert of Egypt, consists predominantly of Neoproterozoic calc-alkaline older granites. Minor exposures of pink microgranite are occurring along Wadi Ras Abda within the older granites. Previous studies on this area demonstrated that the microgranite is altered in some parts and contains anomalous concentrations of rare metal elements (Zr, Th, and U). These altered and mineralized zones are re-assessed using field observations, chemical analysis, and by the application of various transmitted light and electron microscopic techniques. The rare metals exist as mineral segregation grew freely into open cavities of the microgranite and concordant with the NNE strike-slip fault movement. The mineralized zones contain an assemblage of secondary magnetite, zircon, uranothorite, columbite-(Mn), fergusonite-(Y), and allanite-(Ce). The extreme abundance of zircon in the mineralized zone, along with other evidence, indicates a hydrothermal origin of this zircon together with associated rare metals. The geochemical investigation and mass balance calculations revealed extreme enrichment of Zr, Th, U, Y, Nb, Ta, and REE. Post-magmatic hydrothermal alterations resulted in such pronounced chemical and mineralogical heterogeneity. The hydrothermal fluids are thought to be oxidizing, alkaline and of medium temperature (>?250 °C). The average contents of the elements Zr (1606 ppm), Th (1639 ppm), U (306 ppm), Nb (955 ppm), and REE (1710 ppm) in the mineralized microgranite reach sub-economic levels and could be a potential source of these elements.     

Isolation of <Emphasis Type="Italic">Bacillus cereus</Emphasis> from botanical soil and subsequent biodegradation of waste engine oil

Waste engine oil causes a vital environmental pollution when it spill during change and transportation and products of waste engine oil causes lethal effects to the living systems. Thus, abiotic and biotic approaches are being extensively used for removal of waste engine oil pollution. Therefore in present study, waste engine oil degradation was accomplished by a new bacterial culture, isolated from the soil by an enrichment technique. Morphological, biochemical and gene sequence analysis revealed that isolate was Bacillus cereus. Subsequently, biodegradation potential of B. cereus for waste engine oil was studied. Experimental variables, such as pH, substrate concentration, inoculum size, temperature and time on the biodegradation, were checked in mineral salt medium. The biodegradation efficiency of B. cereus was determined by gravimetry, UV–visible spectrophotometry and gas chromatography. In addition, waste engine oil was also characterized by GC–MS and FTIR for its major constituents, which showed total 38 components in waste engine oil, including hopanes, benzopyrene, long-chain aliphatic hydrocarbons, dibenzothiophenes, biphenyl and their derivatives. Results of successive biodegradation indicated that B. cereus was capable to degrade 1% of waste engine oil with 98.6% degradation potential at pH 7 within 20 days. Hence, B. cereus presents an innovative tool for removing the engine oil from the contaminated area.     

Correction to: Flood hazard assessment and mapping of River Swat using HEC-RAS 2D model and high-resolution 12-m TanDEM-X DEM (WorldDEM)

Natural Hazards - The original article was updated and corrected due to numbering errors in Figure 8’s subfigures and the placement of some of the article’s other figures. Additional...     

New insights into the origin of perylene in geological samples

The origin of the polycyclic aromatic hydrocarbon (PAH) perylene in sediments and petroleum has been a matter of continued debate. Reported to occur in Phanerozoic organic matter (OM), fossil crinoids and tropical termite mounds, its mechanism of formation remains unclear. While a combustion source can be excluded, structural similarities to perylene quinone-like components present in e.g. fungi, plants, crinoids and insects, potentially suggest a product-precursor relationship. Here, we report perylene concentrations, ¹³C/¹²C, and D/H ratios from a Holocene sediment profile from the Qingpu trench, Yangtze Delta region, China. Perylene concentrations differ from those of pyrogenic PAHs, and rise to prominence in a stratigraphic interval that was dominated by woody vegetation as determined by palynology including fungal spores. In this zone, perylene concentrations exhibit an inverse relationship to the lignin marker guaiacol, D/H ratios between −284‰ and −317‰, similar to the methoxy groups in lignin, as well as co-variation with spores from wood-degrading fungi. ¹³C/¹²C of perylene differs from that of land plant wax alkanes and falls in the fractionation range expected for saprophytic fungi that utilise lignin, which is isotopically lighter than cellulose and whole wood. During progressive lignin degradation, the relative carbon isotopic ratio of the perylene decreases. We therefore hypothesise a relationship of perylene to the activity of wood-degrading fungi. To support our hypothesis, we analysed a wide range of Phanerozoic sediments and oils, and found perylene to generally be present in subordinate amounts before the evolutionary rise of vascular plants, and to be generally absent from marine-sourced oils, few exceptions being attributed perhaps to a contribution of marine and/or terrestrial-derived fungi, anoxia (especially under marine conditions) and/or contamination of core material by fungi. A series of low-molecular-weight aromatic quinones bearing the perylene-backbone were detected in Devonian and Cretaceous sediments, potentially representing precursor components to perylene.     

Elimination of hydraulic effects for cassiterite in a Malaysian Stream

Geochemical patterns for elements, such as Sn, W and Au, present in drainage sediments as resistate heavy minerals are often erratic and difficult to interpret. To investigate the source of these problems and develop methods of eliminating them we have compared the behavior of Sn, present as cassiterite, and associated pathfinder elements downstream from a small primary Sn deposit in Perak, Peninsular Malaysia.Dispersion trains for the pathfinder elements are characterized by smooth decay patterns and differences in concentrations between high- and low-energy environments, characterized by coarse-and medium-grained sands respectively, are not significant. In contrast, Sn (and magnetite) concentrations are extremely erratic with significantly higher concentrations in high- compared to low-energy environments. As a result the dispersion train for Sn exhibits no regular decay pattern away from its source. These findings suggest that the action of the stream is analogous to that of sluice box, with light minerals being winnowed away and cassiterite, together with magnetite, accumulating. For all but the finest sizes this process, which is most efficient in high-energy environments, causes considerable local variability in Sn content of the sediments. However, because the hydraulic behavior of cassiterite and magnetite is similar, but magnetite is not associated with the primary mineralization, the Sn/magnetite ratio can be used to eliminate Sn anomalies resulting from local variations in hydraulic conditions.The concept of hydraulic equivalence of cassiterite and magnetite was extended to examining the relationship between Sn and different size fractions of the light minerals that constitute the bulk of most sediments. Greatest contrast is obtained when the Sn content of the −270 mesh (−53 μm) fraction is re-expressed as its hydraulic equivalent concentration in −65 + 100 mesh (−212 + 150 μm) material.For exploration purposes it is concluded that: (1) providing cassiterite is present in the fine size fractions, sampling of this material will reduce hydraulic effects, thereby reducing data variability, and can also increase the length of the anomalous dispersion train; and (2) hydraulic effects can also be reduced by re-expressing Sn concentrations as ratios to magnetite (provided this is not associated with the primary Sn mineralization) or a hydraulically equivalent size fraction of the light minerals that constitute the bulk of the sediment. Similar principles probably apply to the interpretation of geochemical data for other elements dispersed in drainage sediments as heavy minerals; this warrants further investigation.     

Factors controlling the changes and spatial variability of <Emphasis Type="Italic">Junipers phoenicea</Emphasis> in Jabal Al Akhdar,Libya, using remote sensing and GIS

The Junipers phoenicea, which covers 70 % of the Jabal Al Akhdar (Green Mountain) in Cyrene on the northeast coast of Libya, has deteriorated over large scales. To deal with this problem, the images of the Landsat 7 Enhanced Thematic Mapper Plus (ETM+) and Landsat 8 Operational Land Imager (OLI) in conjunction with the Shuttle Radar Topography Mission (SRTM) digital elevation model (DEM) were used to map factors controlling the J. phoenicea mortality using a set of automated algorithms and tools. These factors include altitude, slope, aspect, curvature, drainage pattern, seawater intrusion, and land cover. As a first step, changes of J. phoenicea and land cover during the period from the year 2000 to 2015 were mapped. The results showed a sharp decline in J. phoenicea covering an area of 396 km² (22 %) of the total area. The result also showed that areas at a lower elevation with steep slope and faced to the south and southeast directions have a higher probability of J. phoenicea distribution. The spatial analysis showed a positive correlation between wetness and the intensity of J. phoenicea mortality. The results also show that altitude and slope have the most influencing power on the J. phoenicea morality. This study is of great help for decision makers and agriculture engineers and permits a better understanding of ecological and biomass changes in the Jabal Al Akhdar, Libya, over a regional scale.     

Study of horizontal drain effect on slope stability

Slope failure usually occurs when soil particles are unable to build a strong bond with each other and become loose because of the presence of water. Water pressure weakens the ties between the particles and they tend to slip. Therefore, this study focused on the use of horizontal drains to reduce water entry and control the ground water level as a method of slope stabilization. Several previous studies have shown that the use of horizontal drains to lower the water level in soil is one of the fastest and cheapest slope stabilization methods. The main objective of this study is to analyze the effect of horizontal drains on slope stability. Information on slope condition during the landslides which happened at Precinct 9, Putrajaya, Malaysia was used for analytical simulation. Seep/W and Slope/W analyses were carried out with GeoStudio version 2007 software. Slopes with and without horizontal drains were then compared in terms of groundwater level and factor of safety (FOS) values. Scenarios were created for seven types of soil namely: residual, clay, silt, loam, sandy loam, sandy clay loam, and silt clay loam for a case wise analysis. The effect of daily steady rainfall and realcondition rainfall was studied. These cases were studied to find the effectiveness of horizontal drains as a slope stabilization tool. The results revealed that when a drain was installed on a slope, the groundwater level dropped immediately and the safety factor of the slope increased. Sandy loam (sL) soil was identified as the best candidate for a horizontal drain. Its highly saturated hydraulic conductivity Ks facilitated groundwater drain through the horizontal drain effectively. Silt clay loam (scL) soil was identified as the least effective candidate.     

Tunisian landfill leachate treatment using <Emphasis Type="Italic">Chlorella</Emphasis> sp.: effective factors and microalgae strain performance

The potential of the autoclaved Tunisian landfill leachate treatment using microalgae (Chlorella sp.) cultivation was investigated in this study. Landfill leachate was collected from Borj Chakir landfill, Tunisia. A full factorial experimental design 2² was proposed to study the effects of the incubation time and leachate ratio factors on the organic matter removal expressed in chemical oxygen demand (COD) and ammoniacal nitrogen (NH₄─N) and on the biological response of Chlorella sp. expressed by the cell density and chlorophyll content. All experiments were batch runs at ambient temperature (25 ± 2 °C). The Chlorella sp. biomass and chlorophyll a concentrations of 1.2 and 5.32 mg L^?1, respectively, were obtained with 10% leachate spike ratio. The obtained results showed that up to 90% of the ammoniacal nitrogen in landfill leachate was removed in 10% leachate ratio spiked medium with a residual concentration of 40 mg L^?1. The maximum COD removal rate reached 60% within 13 days of incubation time indicating that microalgae consortium was quite effective for treating landfill leachate organic contaminants. Furthermore, with the 10% leachate ratio spiked medium, the maximum lipid productivity was 4.74 mg L^?1 d^?1. The present study provides valuable information for potential adaptation of microalgae culture and its contribution for the treatment of Tunisian landfill leachate.