INTERPRETATION OF COPPER AND ZINC CONTAMINATION IN THE AQUATIC ENVIRONMENT OF PENINSULAR MALAYSIA WITH SPECIAL REFERENCE TO A POLLUTED RIVER, SEPANG RIVER

Three different aquatic ecosystems(an urban pond,Kelana Jaya Pond;a polluted river,Sepang River;and the intertidal and offshore areas of the west coast of Peninsular Malaysia)with different sets of ecological backgrounds and human activities were reviewed and assessed for the levels of Cu and Zn contamination with special reference to those found in polluted sediments collected from the Sepang River.The discussion on the contamination levels of Cu and Zn in the aquatic environment of Peninsular Malaysia was based on a comparison of the metal contamination of 4 kinds of aquatic environments.The comparison of 4 different areas was based on ① total concentrations of 2 metals;② the concentrations and percentages of the nonresistant(EFLE,acid-reducible and oxidisable-organic)and resistant geochemical fractions;and ③ correlation coefficients(R-values)based on data of 4 areas separately and a combination of 4 areas.The Sepang River recorded nonresistant fractions of 63.1% for Zn and 55.8% for Cu in addition to slightly lower metal concentrations when compared to those(60%-70%)reported before the shutting down of the piggery activities in that area.These nonresistant metal percentages(55%-63%)indicated that the metal concentrations were still dominated by anthropogenic sources since nonresistant fraction of metals were mostly contributed by anthropogenic sources.The positive results from the four different aquatic environments assessed here provided strong evidence to show that Malaysia's aquatic environment had received anthropogenic Cu and Zn.The present study also showed that the percentage of the nonresistant fraction and the R-values based on correlation analysis of Cu and Zn could be used as indicators of Cu and Zn pollution in the Malaysian aquatic ecosystem.Based on the present data,the correlation coefficients(R-values)are potential indicators of EFLE Cu and acid-reducible Cu of the sediments.The use of R-values as indicators of metal pollution is suggested and it is applicable to other heavy metal data although it should be improved in future studies.     

Electro-coagulation treatment of raw and autoclaved landfill leachate with aluminum electrodes: case study of Djebel Chakir (Tunisia)

Landfilling is a common practice worldwide for solid waste management. The leachate generated at landfill sites contains various organic and inorganic pollutants while it should be treated properly. In this study, the electrocoagulation (EC) process was recognized for its simplicity and effectiveness which was used for the treatment of leachate from the Djebel Chakir landfill site in northern Tunisia. In addition, we investigated the effect of microorganisms (e.g., bacteria, fungi, spore) on sludge production by the application of autoclaving treatment on raw leachate. The application of low current density (15 mA/cm²) within 2 h of treatment and using Al-Al electrodes revealed significant improvement of performance when autoclaving was applied. The chemical oxygen demand (COD) and nitrogen removal increased from 39 to 64% and from 13 to 30%, respectively. The sludge volume was reduced from 40 to 10%, and thus, its handling and disposal costs would be significantly decreased. The energy consumption rate was stable after 40 min of treatment at about 0.8 kWh/kg COD removed. Our study shows that removal of microorganisms by autoclaving prior to the EC process is promising for landfill leachate treatment. However, since autoclaving is far from being practical and cost-effective at full-scale plant, research on coupling EC with an alternative disinfecting process might be of great interest.     

The Upper Miocene Injana (Upper Fars) Formation of Iraq: insights on provenance history

Petrographic, geochemical, and scanning electron microscope analyses of the sandstone and mudstone units of the Upper Miocene Injana Formation are presented. Furthermore, microprobe analysis for amphiboles, pyroxenes, garnet, and chromian spinels as common heavy mineral species present is done to support other results for better understanding of the provenance history of the Injana Formation. The sandstones of the Injana Formation consist of terrigenous carbonate lithic fragments as common type of sedimentary rock fragments in addition to chert, argillaceous, and rare sandstone fragments. They also include metamorphic and igneous lithic fragments, quartz, feldspars, and mica and generally, the sandstones are lithic arenites and immature. Scanning electron microscopic analysis for the heavy minerals shows that they have been affected by dissolution due to chemical etching and mechanical abrasion through several surface texture generated either in arid and semihumid environment or in diagenetic environment. Clay mineralogy of the mudstone units indicates the presence of illite, chlorite, kaolinite, palygorskite, and illite–smectite mixed layers. Bulk-rock and mineral phase geochemistry in addition to petrographic data suggest the derivation of the Injana Formation from a nearby sources with contribution from igneous, metamorphic, and sedimentary provenance mainly from the high lands in the northeastern parts of Iraq which comprise mainly the Zagros mountains and the older sedimentary formations.     

Diversity and Abundance of Scleractinian Corals in the East Coast of Peninsular Malaysia: A Case Study of Redang and Tioman Islands

Ocean Science Journal - The species lists of scleractinian hard corals in Peninsular Malaysia have not been updated for 15 years. The present study aimed to determine the diversity and abundance...     

Applications of variogram modeling to electrical resistivity data for the occurrence and distribution of saline groundwater in Domail Plain,northwestern Himalayan fold and thrust belt,Pakistan

This paper studies electrical resistivity dataset acquired for a groundwater study in the Domail Plain in the northwestern Himalayan section of Pakistan. Through a combination of geostatistical analysis, geophysical inversion and visualization techniques, it is possible to re-model and visualize the single dimension resistivity data into 2D and 3D space. The variogram models are utilized to extend the interpretation of the data and to distinguish individual lithologic units and the occurrence of saline water within the subsurface. The resistivity data has been calibrated with the lithological logs taken from the available boreholes. As such the alluvial system of the Domail Plain has formed during episodes of local tectonic activity with fluvial erosion and deposition yielding coarse sediments with high electrical resistivities near to the mountain ranges and finer sediments with medium to low electrical resistivities which tend to settle in the basin center. Thus a change is depositional setting happened from basin lacustrine environment to flash flooding during the Himalayan orogeny. The occurrence of rock salt in the northern mountains has imparted a great influence on the groundwater quality of the study area. The salt is dissolved by water which infiltrates into the subsurface through the water channels. Variogram aided gridding of resistivity data helps to identify the occurrence and distribution of saline water in the subsurface.     

Diffusion of China’s coal-fired power generation technologies: historical evolution and development trends

Natural Hazards - With increasing environmental pressure and the promotion of structural reforms on the supply side, a trend of transformation and upgrading is inevitable in coal-fired power...     

Analysis of wheat farmers’ risk perceptions and attitudes: evidence from Punjab,Pakistan

Natural Hazards - Agriculture involves multiple risks of which environmental and production threats are major ones. Farmers’ risk attitudes and risk perceptions have a significant role in...     

Use of receiver functions in wide-angle controlled-source crustal data sets

First-arrival waveforms remain underutilized in crustal refraction–reflection seismology by mostly reducing them to traveltime picks. However, as in earthquake seismology, the waveforms also contain important information about shallow near-receiver structures. We illustrate the use of three-component waveform analysis on the records from the ACCRETE wide-angle data set (SE Alaska and British Columbia; 1994), apply the Receiver Function (RF) methodology to the codas of P -wave arrivals, and draw two important conclusions. First, the P -wave polarization azimuths are found to be controlled by the near-receiver structures and virtually unrelated to the source–receiver backazimuths, from which they deviate by up to ∼40°. This observation might be important for studies of anisotropy and also for earthquake RF studies. Second, after correcting for the polarization azimuths, clear P / S mode conversions are reliably detected within 80–400 ms following the primary arrivals. The conversions are interpreted as originating at the base of the sedimentary cover of the fjord channel. In most cases, imaging of the basement requires only several records; however, notable exceptions are also found and interpreted as caused by multipathing, localized scattering, and onsets of crustal and Moho reflections. The ACCRETE example shows that RF methodology could be useful for constraining sediment thickness and deriving P - and S -wave receiver statics in land refraction surveys where collocated reflection profiles are not available. In addition, RFs from repeatable controlled sources could be useful for testing and calibration of RF techniques.     

Biomechanical properties of aquatic plants and their effects on plant–flow interactions in streams and rivers

We analysed the biomechanical properties of aquatic plant stems of four common submerged river macrophyte species with bending, tension and cyclic loading/unloading tests and related these properties to the hydraulic habitats of the plants. The studied species included Glyceria fluitans, Ranunculus penicillatus, Myriophyllum alterniflorum and Fontinalis antipyretica. Habitat assessment shows that these species occur in a range from low to high flow velocities, respectively. G. fluitans is a semi-aquatic species with stems of a high flexural rigidity and high breaking force and breaking stress that enable them to carry their own weight and balance gravity when growing upright in slow flowing rivers. G. fluitans may also grow horizontally often producing emerged terrestrial stems. In contrast, F. antipyretica grows in fierce water flow. Its stems have the highest flexibility, a significantly higher ‘tension’ Young’s modulus, breaking stress and work of fracture and a lower plastic deformation compared to M. alterniflorum and R. penicillatus. These traits enable F. antipyretica to survive even in swift flowing streams and constrict the growth of M. alterniflorum and R. penicillatus to the river reaches with moderate flow velocities. R. penicillatus has a weak bottom part with a low breaking force and breaking stress acting as a predetermined breaking point and enabling seasonal regrowth from root parts.     

浅层地震资料解释陷阱(英文)

高分辨率浅层地震方法是在近地表调查中使用最为广泛的方法。然而,在许多情况下,地震资料的解释经常会出现错误。在本文中,我们介绍了三个例子,分析了造成P波,SH波,多道的面波(MASW)地震资料解释的错误原因,大都是由于在表面或地下条件约束不确当引起的。第一个例子是P波反射剖面上的一个波的特征被解释为浅层断裂带,但后来证实它是由高水平的背景噪音引起的,因为采集测线通过了一个公路交叉口。第二个例子是SH波反射地震剖面上一个波特征被解释为是逆倾向滑断层,但有针对性的钻探表明,它是一个侵入到基岩面的一个深层局部侵蚀。最后,第三个例子,MASW调查剖面上,一个陡倾特征一开始被解释为基岩谷。然而,后来的钻探表明这是一个非常软的湖泊沉积物,后者严重损坏了应用面波频段。虽然最初的解释是不正确的,但这刺激地球物理学家和地质学家之间的讨论,并强调地球物理数据采集的时候,采集之前以及采集之后需要科学家之间有意义的合作与讨论。