The effects of diagenesis on the reservoir characters in sandstones of the Late Cretaceous Pab Formation,Kirthar Fold Belt,southern Pakistan

The Maastrichtian Pab Formation in the southern part of Pakistan is composed of fine- to very coarse-grained texturally mature quartz arenite and subordinate sublitharenite varieties. The sandstones have undergone intense and complex diagenetic episodes due to burial and uplift. Diagenetic modifications were dependent mainly on the clastic composition of sandstone, burial depth and thrust tectonics. Diagenetic events identified include compaction, precipitation of calcite, quartz, clay minerals and iron oxide/hydroxide, dissolution and alteration of unstable clastic grains as feldspar and volcaniclithic fragments as well as tectonically induced grain fracturing. The unstable clastic grains like feldspar and lithic volcanic fragments suffered considerable alteration to kaolinite and chlorite. Dissolution and alteration of feldspar and volcanic lithic fragments and pressure solution were the main sources of quartz cements. Mechanical compaction and authigenic cements like calcite, quartz and iron oxide/hydroxide reduced the primary porosity, whereas dissolution of clastic grains and cements has produced secondary porosity. Chlorite coatings on clastic grains have prevented quartz cementation. Coarse-grained, thick bedded packages of fluviodeltaic, shelf delta lobe and submarine channels facies have higher average porosity than fine-grained, thin bedded and bioturbated sandstone of deeper shelf and abyssal plain environments and these facies are concluded to be possible future hydrocarbon prospects.     

Mineralogical, geochemical, and geotechnical evaluation of Al-Sowera soil for the building brick industry in Iraq

The raw material soil of Al-Sowera factory quarry (quarry soil and mixture) used for building brick industry was tested mineralogically, geochemically and geotechnically. Mineral components of soil are characterized by Clay minerals (Palygoriskite and chlorite) and non-clay minerals like calcite, quratz, feldspar, gypsum and halite. The raw material is deficient in SiO₂, Al₂O₃, K₂O, Fe₂O₃ and MgO, while enriched in CaO. Loss on ignition and Na₂O are in suitable level and appear to be concordant with the standard. Grain size analyses show that the decreasing sand and clay, and increasing silt ratio in both quarry soil and mixture caused decreasing in strength of brick during molding and after firing. The quarry soil is characterized by high plasticity clayey soil of 30.49 plastic index (P.I), whereas the mixture considered a clayey soil has a low plasticity of 7.7 plastic index (P.I). To improve the chemical and physical properties of the raw material, alumina-silicate minerals rich in K₂O, Fe₂O₃ and MgO are recommended as additive materials to the main mixture.     

Karez irrigation in Pakistan

Karez is an indigenous method of irrigation in which groundwater is tapped by a tunnel. After running for some distance the tunnel comes out in the open and the water is conducted to the command area. Karez irrigation is practised in 22 countries from China to Chile including Pakistan. In Pakistan it is confined to the province of Balochistan which has a tribal society.Karez is an old and stable irrigation system of Pakistan. It is a community enterprise managed by tribal tradition and run by social control. Spacing of the karez, their types, life, length, discharge, land development and allocation, water distribution and management are important aspects of karez irrigation which have been discussed in this paper. Differences in karez maintenance and management produced by differences in tradition and customs of various tribes inhabiting Balochistan are brought out. Furthermore recent changes in Karez irrigation caused by changes in the socio-economic conditions are also analysed.     

Applicability of an ultra-long-range terrestrial laser scanner to monitor the mass balance of Muz Taw Glacier, Sawir Mountains, China

Glacier mass balance is a key component of glacier monitoring programs. Information on the mass balance of Sawir Mountains is poor due to a dearth of in-situ measurements. This paper introduces the applicability of an ultra-long-range terrestrial laser scanner(TLS) to monitor the mass balance of Muz Taw Glacier, Sawir Mountains, China. The Riegl VZ?-6000 TLS is exceptionally well-suited for measuring snowy and icy terrain. Here, we use TLS to create repeated high spatiotemporal resolution DEMs, focusing on the annual mass balance(June 2, 2015 to July 25, 2016). According to TLS-derived high spatial resolution point clouds, the front variation(glacier retreat) of Muz Taw Glacier was 9.3 m. The mean geodetic elevation change was 4.55 m at the ablation area. By comparing with glaciological measurements, the glaciological elevation change of individual stakes and the TLS-derived geodetic elevation change of corresponding points matched closely, and the calculated balance was-3.864±0.378 m w.e.. This data indicates that TLS provides accurate results and is therefore suitable to monitor mass balance evolution of Muz Taw Glacier.     

Comparative study of probable maximum precipitation and isohyetal maps for mountainous regions, Pakistan

Probable maximum precipitation (PMP) is widely used by hydrologists for appraisal of probable maximum flood (PMF) used for soil and water conservation structures, and design of dam spillways. A number of methods such as empirical, statistical and dynamic are used to estimate PMP, the most favored being statistical and hydro-meteorological. In this paper, PMP estimation in mountainous regions of Pakistan is studied using statistical as well as physically based hydro-meteorological approaches. Daily precipitation, dew point, wind speed and temperature data is processed to estimate PMP for a one-day duration. Maximum precipitation for different return periods is estimated by using statistical approaches such as Gumble and Log-Pearson type-III (LP-III) distribution. Goodness of fit (GOF) test, chi-square test, correlation coefficient and coefficient of determination were applied to Gumble and LP-III distributions. Results reveal that among statistical approaches, Gumble distribution performed the best result compared to LP-III distribution. Isohyetal maps of the study area at different return periods are produced by using the GIS tool, and PMP in mountainous regions varies from 150 to 320 mm at an average value of 230.83 mm. The ratio of PMP for one-day duration to highest observed rainfall (HOR) varied from 1.08 to 1.29 with an average value of 1.18. An appropriate frequency factor (K_m) is very important which is a function of mean for observed precipitation and PMP for 1-day duration, and K_m values varies from 2.54 to 4.68. The coefficient of variability (C_v) varies from minimum value of 28% to maximum value of 43.35%. It was concluded that the statistical approach gives higher results compared to moisture maximization (MM) approach. In the hydro-meteorological approach, moisture maximization (MM) and wind moisture maximization (WMM) techniques were applied and it was concluded that wind moisture maximization approach gives higher results of PMP as compared to moisture maximization approach as well as for Hershfield technique. Therefore, it is suggested that MM approach is the most favored in the study area for PMP estimation, which leads to acceptable results, compared to WMM and statistical approaches.     

Geochemistry of the kaolin deposits of Swat (Pakistan)

Kaolin deposits of the Swat District in Pakistan are indicated to have derived by hydrothermal alteration of more feldspathic parts of felsic intrusives, which occur enclosed in orthoamphibolites and orthogneisses of the Cretaceous Kohistan Island Arc terrane. These latter “country rocks” formed under epidote–amphibolite conditions that prograde northwards to amphibolite facies, and locally manifest slight metamorphic differentiation. The felsic intrusives exhibit a general decrease in siliceous character from west to east, but are less siliceous than most hosts of world kaolins. They are composed of chemically allied quartz diorite, tonalite, trondhjemite and pegmatoids, which evolved mainly by an orthomagmatic crystal fractionation. These parental rocks are calc-alkaline in nature, and kaolinization has proceeded in Ca-richer environment. This is in variance with the occurrence of most known kaolin deposits over potassic granites or rhyolites. Ca-metasomatism of the “host rocks” is in evidence. Kaolin formation by a supergene process is not displayed.The raw kaolin with contained unaltered plagioclase is characterized by a rather low silica (46.54–50.93%) and potash (<1%), and high alumina (23.54–26.77%), Fe₂O₃ (1.73–5.45%) and lime (8.13–16.93%) content. Kaolinization proceeded with a decrease in SiO₂ and concomitant increase in Al₂O₃. The same trend is followed with fineness of grain size of washed fractions, in resemblance to other known kaolin deposits of primary as well as secondary origin.     

Estimating water balance components in irrigated agriculture using a combined approach of soil moisture and energy balance monitoring,and numerical modelling

Information on water balance components such as evapotranspiration and groundwater recharge are crucial for water management. Due to differences in physical conditions, but also due to limited budgets, there is not one universal best practice, but a wide range of different methods with specific advantages and disadvantages. In this study, we propose an approach to quantify actual evapotranspiration, groundwater recharge and water inflow, i.e. precipitation and irrigation, that considers the specific conditions of irrigated agriculture in warm, arid environments. This approach does not require direct measurements of precipitation or irrigation quantities and is therefore suitable for sites with an uncertain data basis. For this purpose, we combine soil moisture and energy balance monitoring, remote sensing data analysis and numerical modelling using Hydrus. Energy balance data and routine weather data serve to estimate ET₀. Surface reflectance data from satellite images (Sentinel-2) are used to derive leaf area indices, which help to partition ET₀ into energy limited evaporation and transpiration. Subsequently, first approximations of water inflow are derived based on observed soil moisture changes. These inflow estimates are used in a series of forward simulations that produce initial estimates of drainage and ET_act, which in turn help improve the estimate of water inflow. Finally, the improved inflow estimates are incorporated into the model and then a parameter optimization is performed using the observed soil moisture as the reference figure. Forward simulations with calibrated soil parameters result in final estimates for ET_act and groundwater recharge. The presented method is applied to an agricultural test site with a crop rotation of cotton and wheat in Punjab, Pakistan. The final model results, with an RMSE of 2.2% in volumetric water content, suggest a cumulative ET_act and groundwater recharge of 769 and 297 mm over a period of 281 days, respectively. The total estimated water inflow accounts for 946 mm, of which 77% originates from irrigation.     

A Hybrid Model for Runoff Prediction Using Variational Mode Decomposition and Artificial Neural Network

Water Resources - Hydrological runoff prediction in a reliable and precise manner contributes significantly to the optimal management of hydropower resources. Considering the importance of runoff...     

Probabilistic seismic hazard analysis and spectral accelerations for United Arab Emirates

In recent years, the United Arab Emirates (UAE) has experienced an unprecedented growth which is coupled with the increase in seismic activity in the surroundings. Previous studies presents significant variations in their results whereas some recent studies although very detailed focus on only few cities. This study reviews the results of previous studies and presents new findings for the whole of UAE based on the improved source model and use of next generation attenuation (NGA) equations. The peak ground accelerations, spectral accelerations and deaggregation of hazard for major cities are presented. Moreover, the breakdown of the range of mapped spectral accelerations (S _0.2 and S ₁) is proposed to form the basis for the development of site amplification factors in subsequent studies. The results of this study indicate almost similar values of ground motion compared to some recently published studies and smaller values compared to some earlier studies.