Otolith development in larval and juvenile Schizothorax davidi: ontogeny and growth increment characteristics

Laboratory-reared Schizothorax davidi larvae and juveniles were examined to assess the formation and characteristics of David’s schizothoracin otoliths.Otolith development was observed and their formation period was verifi ed by monitoring larvae and juveniles of knownage.The results revealed that lapilli and sagittae developed before hatching,and the first otolith increment was identified at 2 days post hatching in both.The shape of lapilli was relatively stable during development compared with that of sagittae;however,growth of four sagittae and lapilli areas was consistent,but the posterior area grew faster than the anterior area and the ventral surface grew faster than the dorsal surface.Similarly,the sum length of the radius of the anterior and posterior areas on sagittae and lapilli were linearly and binomially related to total fish length,respectively.Moreover,daily deposition rates were validated by monitoring knownage larvae and juveniles.The increase in lapilli width was 1.88±0.080 0μm at the ninth increment,which reached a maximum and the decreased gradually toward the otolith edge,whereas that of sagittae increased more slowly.These results illustrate the developmental biology of S.davidi,which will aid in population conservation and fish stock management.     

塔克拉玛干沙漠腹地地表辐射与能量平衡

利用2013年塔克拉玛干沙漠塔中流动沙面地表辐射、土壤热通量、土壤温湿度和湍流通量观测资料,分析了沙漠腹地地表辐射和能量收支特征及闭合状况。结果表明：除潜热通量外,其余地表辐射各分量和能量平衡分量的月平均日变化结果整体均表现为标准的单峰型日循环形态,其中R_s↓与R_s↑变化同步,R_l↑、R_l↓滞后R_s↓0.5 ~ 1 h。各分量均表现出夏季高、春秋季次之、冬季低的季节波动性。干旱和极低的植被覆盖造成沙漠腹地全年潜热通量始终较为微弱,约占净辐射的2.8%,感热通量成为能量的主要消耗形式,约占净辐射的49%。偶尔的降水会刺激潜热通量突然增加。地表反照率相对较高且稳定,日变化呈早晚大、正午小的“U”型趋势,并具有明显的冬季高、夏季低的季节波动性,年均值0.28,月均值0.25~0.32。能量残差各月的日变化也均呈单峰曲线,日出后和日落前能量闭合程度最佳,并出现过闭合现象,全年夏季小,春秋季次之,冬季较大,月平均日峰值5.1~99.9 W·m^-2。土壤表层热储存是影响该地区能量平衡的重要因子之一,考虑表层土壤热存储后,地表能量闭合率达75.3%,能量闭合率夏季 > 春季 > 秋季 > 冬季,白天相比夜间有大幅提升。     

北宋中期耕地面积及其空间分布格局重建(英文)

To understand historical human-induced land cover change and its climatic effects, it is necessary to create historical land use datasets with explicit spatial information. Using the taxes-cropland area and number of families compiled from historical documents, we esti-mated the real cropland area and populations within each Lu (a province-level political region in the Northern Song Dynasty) in the mid-Northern Song Dynasty (AD1004-1085). The es-timations were accomplished through analyzing the contemporary policies of tax, population and agricultural development. Then, we converted the political region-based cropland area to geographically explicit grid cell-based fractional cropland at the cell size of 60 km by 60 km. The conversion was based on calculating cultivation suitability of each grid cell using the topographic slope, altitude and population density as the independent variables. As a result, the total area of cropland within the Northern Song territory in the 1070s was estimated to be about 720 million mu (Chinese area unit, 1 mu = 666.7 m2), of which 40.1% and 59.9% oc-curred in the north and south respectively. The population was estimated to be about 87.2 million, of which 38.7% and 61.3% were in the north and south respectively, and per capita cropland area was about 8.2 mu. The national mean reclamation ratio (i.e. ratio of cropland area to total land area; RRA hereafter for short) was bout 16.6%. The plain areas, such as the North China Plain, the middle and lower reaches of the Yangtze River, Guanzhong Plain, plains surrounding the Dongting Lake and Poyang Lake and Sichuan Basin, had a higher RRA, being mostly over 40%; while the hilly and mountainous areas, such as south of Nanling Mountains, the southwest regions (excluding the Chengdu Plain), Loess Plateau and south-east coastal regions, had a lower RRA, being less than 20%. Moreover, RRA varied with topographic slope and altitude. In the areas of low altitude (≤250 m), middle altitude (250-100 m) and high altitude (1000-3500 m), there were 443 million, 215 million and 64 million mu of cropland respectively and their regional mean RRAs were 27.5%, 12.6% and 7.2% respectively. In the areas of flat slope, gentle slope, medium slope and steep slope, there were 116 million, 456 million, 144 million and 2 million mu of cropland respectively and their regional mean RRAs were 34.6%, 20.7%, 8.5% and 2.3% respectively.     

新疆于田MS7.3地震同震与震后形变机制研究

利用InSAR技术获取2008-03-21新疆于田MS7.3地震的同震和震后形变场。同震分布式滑动反演结果表明,同震断层最大滑动量达5.4 m,主要分布在南部断层的0~5 km深度附近,地震以正断错动为主,兼有左旋走滑分量。震后形变结果表明,发震断层北段两侧存在差异性运动,最大累积差异形变在震后782 d达15 cm。进一步分析表明,震后断层余滑可能是震后形变的主要机制。余滑反演结果表明,震后2 a断层余滑量相对较小,滑移区范围明显减小且均位于浅部区域,北部断层能量释放较彻底,南部仍存有少量能量,整体能量基本释放完。     

三维激光扫描点云数据在CloudWorx for MicroStation下的处理

三维激光扫描技术作为一种先进的测量手段应用前景十分广阔,但是,在应用其扫描所得的点云数据进行内处理上又遇到了许多技术性的问题。CAD系统处理大量点云数据过程中存在局限性,一旦用CAD系统处理点云时,CAD程序就会出现错误操作提示,甚至完全停止进程。CloudWorx克服了这些局限性,它避免了直接输入数据,而是利用Cyclone技术作为MicroStation环境下有效管理和解决点云的工具,使MicroStation内点云操作与CAD程序执行再无冲突。本文主要介绍了并且还介绍了CloudWorx模块的功能,并举例就点云数据在CloudWorx for MicroStation软件环境下的处理工作进行了详细的介绍。     

基于KML的三维专题图表示方法

近几年来,虚拟地理环境系统得到广泛应用。专题图制作在制图学上有着悠久的历史。但是在虚拟地理环境浏览系统中(如Google Earth)对专题要素的表达没有得到足够的重视。文中研究如何利用KML制作专题符号,并在三维虚拟地理环境浏览系统中利用基于KML的专题符号实现定点符号法、分区图表法、质别底色法等专题图表示方法。通过实验说明KML在专题图的制作中具有巨大潜力,但同时也有一些重点问题需要解决。     

面向对象分类特征优化选取方法及其应用

与传统基于像元的分类方法比较,面向对象的分类方法可利用的地物信息更加丰富,然而如何从众多信息中筛选出能够有效提取不同地物的分类特征,从而提高分类效率与精度,是使用面向对象方法分类时急需解决的问题。SEaTH算法（分离阈值法）是一种有效的自动选取分类特征并计算阈值的方法,但其只考虑了类间距离,容易存在信息的冗余,从而对分类精度造成一定影响。本文在SEaTH算法的基础上,综合考虑了特征间的相关性、类间距离以及类内距离,对SEaTH算法进行了优化,并将改进前后的两种方法运用到广东省肇庆市TM影像及环境一号卫星影像土地覆盖分类中进行对比分析。实验结果表明,改进后的方法筛选出的特征在提取地物上更为有效,尤其使耕地的分类精度提高了12.26%,使分类总体精度由80%提高到了85.26%。改进后的方法对不易获取多时相影像的地区的土地覆盖分类具有重要意义。     

直升机飞行专题图分层设色方案研究与实践

随着我国低空空域的逐步开放,直升机的应用会越来越广泛。面向直升机飞行使用的专题图需求会越来越迫切。本文在深入研究直升机的飞行特点基础之上,结合分层设色的原理和方法,研究和设计了面向直升机飞行使用的专题图分层设色方案。实践表明该方案能够突出直升机飞行时对地形、地貌关注的特点,对飞行员认知地形具有一定的帮助,具有一定的实用价值。     

大比例尺地形图数据建库格式的转换

介绍了将南方CASS软件编绘的1∶500数字化地形图(DWG格式)转换为符合测区数字测图DWG分层分色标准的数字化dwg格式图、转换为符合测区地形图要素分类编码规程和测区地形图数据结构规程的ESRI的SHP格式图、转换为符合测区地形图要素分类编码规程的Microsation V8的DGN格式图的三种格式转换的基本原理和技术路线.采用系统化编程方式批量进行转换,把大量的工作都凝聚在程序里,提高了效率,减免了数据转换过程中的信息损失,保证了质量,达到了入库要求.     

改进Frost算子在SAR图像斑点噪声抑制中的应用

针对合成孔径雷达(SAR)图像斑点噪声滤波的重要性以及存在的问题,对Frost滤波算法参数进行分析,指出了该算法等权滤波器在处理含有细节结构特征时存在盲目平滑的缺点,进而提出了改进方法。利用灰度差值计算权值,综合考虑滤波窗口内的强度信息,在一定程度上解决了盲目平滑的问题。实验验证了改进算法的有效性,并以斑点噪声指数和边缘保持指数为评价准则,通过与Frost算法比较,对改进算法在去除噪声和边缘保持方面的性能做了客观评价。