Effects of rainfall patterns on runoff and rainfall-induced erosion

Rainfall-induced erosion involves the detachment of soil particles by raindrop impact and their transport by the combined action of the shallow surface runoff and raindrop impact.Although temporal variation in rainfall intensity(pattern)during natural rainstorms is a common phenomenon,the available information is inadequate to understand its effects on runoff and rainfall-induced erosion processes.To address this issue,four simulated rainfall patterns(constant,increasing,decreasing,and increasing-decreasing)with the same total kinetic energy were designed.Two soil types(sandy and sandy loam)were subjected to simulated rainfall using 15 cm×30 cm long detachment trays under infiltration conditions.For each simulation,runoff and sediment concentration were sampled at regular intervals.No obvious difference was observed in runoff across the two soil types,but there were significant differences in soil losses among the different rainfall patterns and stages.For varying-intensity rainfall patterns,the dominant sediment transport mechanism was not only influenced by raindrop detachment but also was affected by raindrop-induced shallow flow transport.Moreover,the efficiency of equations that predict the interrill erosion rate increased when the integrated raindrop impact and surface runoff rate were applied.Although the processes of interrill erosion are complex,the findings in this study may provide useful insight for developing models that predict the effects of rainfall pattern on runoff and erosion.     

Cu (II) removal intensification using Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles under inert gas and magnetic field in a microchannel

In the present study, Cu (II) ions removal from aqueous solution was intensified by exciting magnetic nanoparticles under inert gas, magnetic field and combination of these two mixing methods in a T-type microchannel. The flow patterns and liquid–liquid two-phase mass transfer were studied in three different magnet distances from mixing channel (3, 6 and 10 mm) and also in the presence of different inert gas flow rates (1, 3 and 5 mL/min). Depending on the mixing method and the flow rate of both phases, several distinct flow patterns were observed including slugs, droplet, parallel and dispersed flows. The performances of mixing techniques for mass transfer enhancement based on relative removal efficiency ratio (λ) and mass transfer coefficient ratio (γ) were compared with simple layout (without nanoparticles, magnetic field and inert gas). The results showed that simultaneous using of inert gas and magnetic field can drive the nanoparticles as mixer. Liquid–liquid mass transfer with 27–62% enhancement in E and 235–285% in K _L a compared with plain one was observed.     

Constitutive model for cyclic behaviour of cohesionless sands

This paper presents a constitutive model for describing the stress-strain response of sands under cyclic loading. The model, formulated using the critical state theory within the bounding surface plasticity framework, is an upgraded version of an existing model developed for monotonic behaviour of cohesionless sands. With modification of the hardening law, plastic volumetric strain increment and unloading plastic modulus, the original model was modified to simulate cyclic loading. The proposed model was validated against triaxial cyclic loading tests for Fuji River sand, Toyoura sand and Nigata sand. Comparison between the measured and predicted results suggests that the proposed modified model can capture the main features of cohesionless sands under drained and undrained cyclic loading.     

Petrogenesis of Volcanic Rocks in the Khabr-Marvast Tectonized Ophiolite:Evidence for Subduction Processes in the South-Western Margin of Central Iranian Microcontinent

Abstract: The Late Cretaceous Khabr–Marvast tectonized ophiolite is located in the middle part of the Nain–Baft ophiolite belt, at the south-western edge of the central Iranian microcontinent. Although all the volcanic rocks in the study area indicate subduction-related magmatism (e.g. high LILE (large ion lithophile elements) / HFSE (high field strenght elements) ratios and negative anomalies in Nb and Ta), geological and geochemical data clearly distinguish two distinct groups of volcanic rocks in the tectonized association: (1) group 1 is comprised of hyaloclastic breccias, basaltic pillow lavas, and andesite sheet flows. These rocks represent the Nain–Baft oceanic crust; and (2) group 2 is alkaline lavas from the top section of the ophiolite suite. These lavas show shoshonite affinity, but do not support the propensity of ophiolite.     

Forced vertical vibration of rigid circular disc buried in an arbitrary depth of a transversely isotropic half space

This paper is concerned with the investigation of the vertical vibration of a rigid circular disc buried at an arbitrary depth in a transversely isotropic half space in such a way the axis of material symmetry of the half space is normal to the surface of it and parallel to the vibration direction. By using the Hankel integral transforms, the mixed boundary-value problem is transformed to a pair of integral equations called dual integral equations, which generally can be reduced to a Fredholm integral equation of the second kind. With the aid of complex variable or contour integration, the governing integral equation is numerically solved in the general dynamic case. Two degenerated cases (i) the disc is buried in a transversely isotropic full space, and (ii) rigid circular disc is attached on the surface of the half space are discussed. The reduced static case of the dual integral equations is solved analytically and the vertical displacement, the contact pressure and the static impedance/compliance function are explicitly found. It is shown that the vertical pressure and the compliance function reduced for isotropic half space are identical to the previous solutions reported in the literature. The dynamic contact pressure under the disc and the impedance function are numerically evaluated in general dynamic case and graphically shown that the singularity exists in the contact pressure at the edge of the disc is the same as the static case. In addition, the impedance functions evaluated here for the isotropic domain are collapsed on the solution given by Luco and Mita. To show the effect of different material anisotropy, the numerical evaluations are given for some different transversely isotropic materials and compared.     

Platinum-group elements distribution and spinel composition in podiform chromitites and associated rocks from the upper mantle section of the Neoproterozoic Bou Azzer ophiolite, Anti-Atlas, Morocco

The distribution of platinum-group elements (PGEs), together with spinel composition, of podiform chromitites and serpentinized peridotites were examined to elucidate the nature of the upper mantle of the Neoproterozoic Bou Azzer ophiolite, Anti-Atlas, Morocco. The mantle section is dominated by harzburgite with less abundant dunite. Chromitite pods are also found as small lenses not exceeding a few meters in size. Almost all primary silicates have been altered, and chromian spinel is the only primary mineral that survived alteration. Chromian spinel of chromitites is less affected by hydrothermal alteration than that of mantle peridotites. All chromitite samples of the Bou Azzer ophiolite display a steep negative slope of PGE spidergrams, being enriched in Os, Ir and Ru, and extremely depleted in Pt and Pd. Harzburgites and dunites usually have intermediate to low PGE contents showing more or less unfractionated PGE patterns with conspicuous positive anomalies of Ru and Rh. Two types of magnetite veins in serpentinized peridotite, type I (fibrous) and type II (octahedral), have relatively low PGE contents, displaying a generally positive slope from Os to Pd in the former type, and positive slope from Os to Rh then negative from Rh to Pd in the latter type. These magnetite patterns demonstrate their early and late hydrothermal origin, respectively. Chromian spinel composition of chromitites, dunites and harzburgites reflects their highly depleted nature with little variations; the Cr# is, on average, 0.71, 0.68 and 0.71, respectively. The TiO₂ content is extremely low in chromian spinels, <0.10, of all rock types. The strong PGE fractionation of podiform chromitites and the high-Cr, low-Ti character of spinel of all rock types imply that the chromitites of the Bou Azzer ophiolite were formed either from a high-degree partial melting of primitive mantle, or from melting of already depleted mantle peridotites. This kind of melting is most easily accomplished in the supra-subduction zone environment, indicating a genetic link with supra-subduction zone magma, such as high-Mg andesite or arc tholeiite. This is a general feature in the Neoproterozoic upper mantle.     

Synoptic and remote sensing analysis of dust events in southwestern Iran

Southwest regions of Iran, due to dry environmental and climatic conditions, have been identified as one of the five major regions in the world. In recent years, large parts of Iran have been affected by suspended particles from the dust storms. The studied area is located in foothills of the Zagros Mountain Range just north of Persian Gulf in southwest of Iran. Dust and other meteorological data were prepared in 3-hour intervals from 12 synoptic weather stations. For tracking dust storms, satellite images of MODIS were used. Atmospheric conditions during the occurrence of dust storms were determined using NCEP reanalysis data. According to the statistical calculations, most storms occurred in the spring and summer. The lowest number of dust events occurred in the fall and winter particularly in December and January, when there are high possibilities of rainfall occurrence and dynamical instability conditions in the north and west of the region. The results illustrated that the highest amounts of hourly dust occurred in the afternoon and the lowest amounts occurred at 00UTC (3.30 am local times). It seems that it is closely related to the heating surface and the occurrence of local dry instabilities. Analyses of data showed that dust amounts (or volumes) in all the stations have two climactic peaks, first between 1982 and 1990 and second between 2005 and 2008 periods. These peaks can be related to a variety of factors including anthropogenic factors such as war, agricultural activities, dam construction, and widespread droughts.     

Probabilistic Analysis of Ground Surface Vibration Due to Train Movement, a Case Study on Tehran Metro Line 4

Ground surface vibration produced by moving train is one of the most important aspects in urban areas. The purpose of this study is the probabilistic analysis of ground surface vibration, which is generated by metro transportations. For this reason, Tehran metro line 4 is considered as a case study. In this paper, at first, a new procedure is used to simulate train dynamic load. In the second step, based on the variation of geomechanical properties and train characteristics in Tehran metro line 4, more than 60 numerical models are simulated. The results of numerical simulations are analyzed by multivariate statistical technique and an equation for prediction of peak particle velocity (PPV) in the ground surface is presented. In the next step, probabilistic analysis is done using Monte Carlo Simulation (MCS). Finally, sensitivity of input data on ground surface vibration is discussed and the impact of geomechanical properties and train characteristics on the surface vibration is considered. Based on the probabilistic analysis, PPV in the surface region of Tehran metro line 4 is <2.76?mm/s with 95?% probability.