First Record of Sexual Dimorphism in Toxasterid Echinoid Heteraster from the Early Cretaceous Deposits of the Kopet-Dagh Basin,NE Iran

Spatangoid echinoids belonging to Heteraster found in the Lower Cretaceous limestones and calcareous deposits of the Tirgan and Sarcheshmeh formations(Barremian–Aptian) in the Bahman jan-Bala stratigraphic section on the northern flank of the Borouj syncline, situated in the eastern Kopet-Dagh Basin, northeastern Iran are assessed as a sexually dimorphic species. Sexual dimorphism is a common feature in echinoids and, in this study of Heteraster renngarteni Poretzkaja, 1961, sexual dimorphism ha...     

A new approach to plane failure of rock slope stability based on water flow velocity in discontinuities for the Latian dam reservoir landslide

The stability of slopes is always of great concern in the field of rock engineering. The geometry and orientation of pre-existing discontinuities show a larger impact on the behavior of slopes that is often used to describe the measurement of the steepness, incline, gradient, or grade of a straight line. One of the structurally controlled modes of failure in jointed rock slopes is plane failure. There are numerous analytical methods for the rock slope stability including limit equilibrium, stress analysis and stereographic methods. The limiting equilibrium methods for slopes under various conditions against plane failure have been previously proposed by several investigators. However, these methods do not involve water pressure on sliding surfaces assessments due to water velocity and have not yet been validated by case study results. This paper has tried to explore the effects of forces due to water pressure on discontinuity surfaces in plane failure through applying the improved equations. It has studied the effect of water flow velocity on sliding surfaces in safety factor, as well. New equations for considering water velocity (fluid dynamics) are presented. To check the validity of the suggested equations, safety factor for a case study has been determined. Results show that velocity of water flow had significant effect on the amount of safety factor. Also, the suggested equations have higher validity rate compared to the current equations.     

Block size selection with the objective of minimizing the discrepancy in real and estimated block grade

The valuation of a mining project depends upon the accuracy of geological block model. Sampling density, estimation method, and proper block size mainly affect the accuracy of estimated block. This paper aims to answer three questions: (1) which estimation method is more accurate, (2) what is the relation between sampling density and block size, and (3) what the optimum block size is. Conditional Gaussian simulation (CGS) was used to generate a hypothetical deposit, considered as a real block model. A range of different block dimensions were estimated by ordinary kriging, inverse squared distance, and nearest neighbor methods based on tow-simulated drilling grids database. The comparison of estimated and real block grades reveals that increasing the sampling density results the similar outcomes of geostatistics and deterministic interpolation methods. Furthermore, it was deduced that sampling density could not be a viable alternative in choosing appropriate block dimension and the variogram rang a was suggested as an affective parameter in block size selection. Then a geometrical formula was developed to obtain the block size based on the variogram range. The increment in project value that a mine planner can expected from the additional information of the dense drilling grid was also calculated and it was concluded that the block size obtained based on the suggested formula results acceptable information value. Finally, the database of Chador Malu iron ore mine which is located in 180 km northeast of Yazd city in the central part of Iran were used to validate the suggested formula.     

A late Pleistocene long pollen record from Lake Urmia, NW Iran

A palynological study based on two 100-m long cores from Lake Urmia in northwestern Iran provides a vegetation record spanning 200 ka, the longest pollen record for the continental interior of the Near East. During both penultimate and last glaciations, a steppe of Artemisia and Poaceae dominated the upland vegetation with a high proportion of Chenopodiaceae in both upland and lowland saline ecosystems. While Juniperus and deciduous Quercus trees were extremely rare and restricted to some refugia, Hippophaë rhamnoides constituted an important phanerophyte, particularly during the late last glacial period. A pronounced expansion in Ephedra shrub-steppe occurred at the end of the penultimate late-glacial period but was followed by extreme aridity that favoured an Artemisia steppe. Very high lake levels, registered by both pollen and sedimentary markers, occurred during the middle of the last glaciation and late part of the penultimate glaciation. The late-glacial to early Holocene transition is represented by a succession of Hippophaë, Ephedra, Betula, Pistacia and finally Juniperus and Quercus. The last interglacial period (Eemian), slightly warmer and moister than the Holocene, was followed by two interstadial phases similar in pattern to those recorded in the marine isotope record and southern European pollen sequences.     

Inverse problem theory to chemo-poroelastic parameters estimation: an analytical/experimental investigation

Shale formation swelling is one of the main factors affecting wellbore instability and associated problems in drilling operation. In order to eliminate these problems, it is important to investigate formation characteristics and understand mechanisms of rock-fluid interaction, from chemical/mechanical point of view. Shale membrane efficiency is known as an important parameter affecting wellbore instability. In order to measure this parameter, many mathematical models and experimental efforts have been carried out which consider mechanical-chemical processes for rock-fluid interactions. In this study, the field equations governing the problem have been derived based on the linear chemo-poroelastic theory and solved using analytical/numerical methods. Afterward, a comprehensive workflow to characterize the chemo-poroelastic parameters of illite-rich shale is conducted in the laboratory. In fact, mineralogical and apparent properties of shale sample have been described and some setups were performed such as triaxial test and membrane efficiency. Then genetic algorithm has been applied to solve an inverse problem and get a match between experimental data and modeling results. Ultimately, the three important properties in shale-fluid interactions, i.e., shale membrane efficiency, hydraulic, and chemical diffusivity coefficient have been estimated. Comparing the simulation results with the experimental data indicates that the simulation model can appropriately simulate the pore pressure transmission test. With this approach, the required parameters can be estimated with good accuracy without using time-consuming and costly tests.     

Effects of sample disturbance and heterogeneity on the triaxial behaviour of a Canadian oil sand at ambient and high temperatures

The present paper investigates the mechanical behaviour of oil sand specimens in triaxial compression tests at both ambient and elevated temperatures. The emphasis is particularly on core sample disturbance and on the multiphase/strongly heterogeneous nature of the material that introduces difficulties in achieving an objective characterization of its shear behaviour. First, the effect of sample disturbance on the behaviour of the oil sand is studied. Tests are performed on both disturbed and recompressed specimens. Recompression to large stress prior to shearing improves evaluation of the initial stiffness and associated volumetric changes of the oil sand, strongly affected by sample disturbance. A method for the correction of test results obtained from disturbed specimens is also proposed. The corrected results are in good agreement with those pertaining to recompressed specimens. Furthermore, a general classification of the tested oil sands into lean and rich in bitumen, where the former shows much softer and weaker behaviour, is considered to help in addressing the variability in sample composition. As for thermal aspects, the experimental results indicate that both strength and stiffness exhibit a limited temperature dependency. The temperature does not affect lean oil sand specimens, whereas heating considerably increases deformability of rich specimens.     

Contribution of spectral coherency analysis and tracer test to study leakage at the Doosti Dam reservoir,Iran and Turkmenistan

The Doosti Dam was built across the Harirood River on the border between Turkmenistan and Iran. During the reservoir impounding, leakage occurred as new springs through the sandstone layers of the Pesteleigh Aquifer and limy sandstone and limestone layers of the Neyzar–Kalat Aquifer, at the right abutment of the dam. To evaluate the grout curtain operation, a tracer test was carried out by injection of Uranine in a borehole located at the upstream of grout curtain in the Pesteleigh Aquifer. Tracer test results demonstrated a diffuse flow component through the grout curtain in the Pesteleigh Aquifer, but no tracer was detected at the main leakage point, SP1 Spring, emerged downstream of grout curtain from the Neyzar–Kalat Aquifer. Using the spectral coherency function, the lag time between changes in the water level of the injection borehole and water level in the tracer detected boreholes or discharge of the tracer detected springs was determined. Linear regression analyses indicated that the estimated lag time by the time series analysis was close to the first arrival time of the tracer. Therefore, the estimated velocities based on the lag time of time series could be considered close to the calculated velocities based on the first arrival time of the tracer. The estimated groundwater velocities based on the time series analysis ranged from 3.91 to 20.31 m h^?1, showed that diffuse flow dominated pathways from the reservoir toward the downstream boreholes in the Neyzar–Kalat Aquifer, while conduit flow was present within the pathways toward the SP1 Spring. Regarding the reservoir volume, the negligible amount of leakage at the maximum water level of the reservoir confirmed well overall operation of the grout curtain at the dam site.     

Numerical Modelling Investigation of Wave Interaction on Composite Berm Breakwater

China Ocean Engineering - The breakwaters have experienced many changes during their construction history. These changes have been considered to improve their performance, depending on their...     

Luminescence dating of the last earthquake of the Sabzevar thrust fault, NE Iran

Iran is one of the world's most tectonically active regions, yet dating past earthquakes for neotectonic studies has been limited. One of the main reasons for this is that organic material suitable for radiocarbon dating of deformed sediments is rare. We investigate the use of infrared stimulated luminescence (IRSL) from coarse-grained feldspars to date colluvial deposits associated with the Sabzevar thrust fault in northeastern Iran. The single-aliquot regenerative (SAR) dose measurement procedure was used for this study. The current study investigates monitoring and correcting for sensitivity changes, recovering a known laboratory dose and equivalent dose estimation using three SAR IRSL methods. It is shown that SAR has recovered a given laboratory dose using a range of preheat temperatures but D_e determination of natural samples requires its own preheat plateaus for two of these SAR methods. The SAR IRSL method provided an age of 1.7±0.3 ka for colluvium, predating the last earthquake event on the Sabzevar fault. This result suggests that this fault is likely to be responsible for an earthquake that destroyed Sabzevar city in AD 1052.