Distinct element simulation of ultimate bearing capacity in jointed rock foundations

In this paper, distinct element method numerical modeling is applied to evaluate bearing capacity of strip footing rested on anisotropic discontinuous rock mass. As yet, a little work has been carried out to investigate the effect of joint set orientation on the bearing capacity of rock mass. Generally, the overall behavior of rock mass under loading is very complicated and such analysis should include deformation determination, sliding along discontinuities and failure of rock material. Failure mechanism of rock mass depended on both geometrical parameters of joint sets and strength parameters of rock mass. In this research, it is assumed that rock mass contains one joint set, and therefore the anisotropy in bearing capacity and rock behavior is only due to the existence and orientation of the joint set. In this study, by assuming constant strength parameters and using Mohr–Coulomb failure criterion for the single joint set and nonlinear Hoek–Brown failure criterion for rock material, variation of the bearing capacity values and the type of failure mechanism of rock mass with different joint set dips is investigated. The obtained results indicate that the ultimate bearing capacity of rock mass containing one joint set varies between 27 and 86 % of intact rock.     

The Reissner–Sagoci problem for a transversely isotropic half‐space

A transversely isotropic linear elastic half‐space, z?0, with the isotropy axis parallel to the z‐axis is considered. The purpose of the paper is to determine displacements and stresses fields in the interior of the half‐space when a rigid circular disk of radius a completely bonded to the surface of the half‐space is rotated through a constant angle θ₀. The region of the surface lying out with the circle r?a, is free from stresses. This problem is a type of Reissner–Sagoci mixed boundary value problems. Using cylindrical co‐ordinate system and applying Hankel integral transform in the radial direction, the problem may be changed to a system of dual integral equations. The solution of the dual integral equations is obtained by an approach analogous to Sneddon's (J. Appl. Phys. 1947; 18 :130–132), so that the circumferential displacement and stress fields inside the medium are obtained analytically. The same problem has already been approached by Hanson and Puja (J. Appl. Mech. 1997; 64 :692–694) by the use of integrating the point force potential functions. It is analytically proved that the present solution, although of a quite different form, is equivalent to that given by Hanson and Puja. To illustrate the solution, a few plots are provided. The displacements and the stresses in a soil deposit due to a rotationally symmetric force or boundary displacement may be obtained using the results of this paper. Copyright © 2006 John Wiley & Sons, Ltd.     

Biofiltration of Hexane Vapor: Experimental and Neural Model Analysis

Biofiltration is a commonly practiced biological technique to remove volatile compounds from waste gas streams. From an industrial view‐point, biofilter (BF) operation should be flexible to handle temperatures and inlet load (IL) variations. A compost BF was operated at different temperatures (30–45°C) and at various inlet loading rates (ILR; 8–598 g m^?3 h^?1) under intermittent loading conditions. Complete removal of n‐hexane was observed at 30 and 35°C at ILRs up to 330 g m^?3 h^?1. Besides, 20–75% of the pollutant was removed at 40°C, corresponding to the different ILs applied to the BF. Increasing the temperature to 45°C decreased the removal efficiency (RE) significantly. A feed forward neural network was used to predict the RE of BF with temperature and ILR as the input variables. The experimental data was divided into training (2/3) and test datasets (1/3). The best structure of neural network was obtained by trial and error on the basis of the least differences between predicted and experimental values, as ascertained from their coefficient of regression (R²) values. The modeling results showed that a multilayer network with the topology 2?10?1 was able to predict BF performance effectively with R²‐value of 0.995 for the test data. The results from this study showed the predicting capability of ANNs which can be considered as an alternative for conventional knowledge‐based models.     

Design and full‐scale experimental evaluation of a seismically endurant steel buckling‐restrained brace system

This paper presents the results of 12 full‐scale tests on buckling‐restrained brace (BRB) specimens. A simple‐to‐fabricate all‐steel encasing joined by high‐strength bolts was used as the buckling‐restrainer mechanism. Steel BRBs offer significant energy dissipation capability through nondeteriorating inelastic response of an internal ductile core. However, seismic performance of BRBs is characterized by interaction between several factors. In this experimental study, the effects of core‐restrainer interfacial condition, gap size, loading history, bolt spacing, and restraining capacity are evaluated. A simple hinge detail is introduced at the brace ends to reduce the flexural demand on the framing components. Tested specimens with bare steel contact surfaces exhibited satisfactory performance under the American Institute of Steel Construction qualification test protocol. The BRBs with friction‐control self‐adhesive polymer liners and a graphite‐based dry lubricant displayed larger cumulative inelastic ductility under large‐amplitude cyclic loading, exceeding current code minimum requirements. The BRB system is also examined under repeated fast‐rate seismic deformation history. This system showed significant ductility capacity and remarkable endurance under dynamic loading. Furthermore, performance is qualified under long‐duration loading history from subduction zone's megathrust type of earthquake. Predictable and stable performance of the proposed hinge detail was confirmed by the test results. Internally imposed normal thrust on the restrainer is measured using series of instrumented bolts. Weak‐ and strong‐axis buckling responses of the core are examined. Higher post‐yield stiffness was achieved when the latter governed, which could be advantageous to the overall seismic response of braced frames incorporating BRBs.     

Shoreline spatial and temporal response to natural and human effects in Boujagh National Park,Iran

Shoreline variation and river deltas are among the most dynamic systems in marine environments. The related different variations in spatial and temporal scales play significant roles in land planning and different management applications. Modeling the dynamics of seashore of Boujagh National Park (BNP) which is located on the southern coast of the Caspian Sea in the Sefidrud Delta (SD), considering natural and anthropogenic factors, was the main objective of the current study. To achieve this goal, a combination of remote sensing data, historical data, and numerical simulations was utilized. The BNP covers an area of 3,270 ha and includes two international wetlands, Boujagh and Kiashahr. In earlier periods, this area faced severe morphological changes whereas recently its shoreline has experienced gradual variations. Accordingly, at the first stage, the shoreline variation from 2006 to 2017 was extracted by processing and classifying Operational Land Imager (OLI) and Thematic Mapper (TM) images from Landsat satellites using the Maximum Likelihood approach. In the second stage, the two dimensional MIKE21 model was utilized to identify wave and coastal current patterns and parameters for the year 2015. Morphologically, the results showed that, the shoreline of the BNP is affected by several natural and anthropogenic factors. Seaward advancement of the shoreline occurred in zones A (east zone) and C (west zone) due to Caspian Sea Level drop and sedimentation while retreating occurred at Zone B (north zone) influenced by wave and current patterns and reduction of the Sefidrud River flows. Also, the results imply that maintaining the existing conditions results in the disappearance of a considerable part of the ecological area in the BNP. Hence, to manage and preserve the coastline of the BNP complying with the current anthropogenic and natural factors, it is vital to take necessary management measures.     

Late glacial and early Holocene hydroclimate variability in northwest Iran (Talesh Mountains) inferred from chironomid and pollen analysis

We reconstructed the paleohydrologic and climatic history of the Lake Neor region, NW Iran, from the end of the late glacial to the middle Holocene (15,500–7500 cal yr BP). Subfossil chironomid and pollen assemblages in a sediment core from a peatland located south of Lake Neor enabled identification of four main hydrologic phases. The period 15,500–12,700 cal yr BP was characterized by a relatively dry climate with an open landscape, suggested by the abundance of Irano-Turanian steppe plants (e.g. Amaranthaceae, Artemisia and Cousinia). Dominance of several shallow-water and semi-terrestrial chironomid taxa (e.g. Pseudosmittia, Smittia/Parasmittia and Paraphaenocladius/Parametriocnemus) during this period is indicative of lower water tables in the wetland. Between 12,700 and 11,300 cal yr BP, chironomid taxa indicate higher wetland water tables, as suggested by the presence of Zavrelia, Chironomus anthracinus/plumosus-type and Micropsectra, which are inhabitants of open-water, lacustrine areas. The open-steppe vegetation remained dominant in the watershed during this time. Increasing wetland moisture could be explained by: (1) cool summers that reduced the evaporation rate; and/or (2) a decrease in duration of the summer dry season. The period 11,300–8700 cal yr BP was characterized by lower wetland moisture, contemporaneous with a delay in the expansion of deciduous forest, suggesting persistent dry climate conditions throughout the beginning of the Holocene, which may have been related to the intensified seasonality of precipitation. Around 8700 cal yr BP, higher wetland water levels, inferred from chironomids, occurred simultaneously with the onset of regional deciduous forest expansion, probably caused by a shortening of the summer dry period. We concluded that chironomids are appropriate paleoecological proxies to investigate global and local hydrologic variability in the Middle East.     

GIS integration of hydrogeological and geoelectrical data for groundwater potential modeling in the western part of greater Kushtia district of Bangladesh

Geographical Information System (GIS) has been used in this paper to delineate groundwater resources potential in the western part of greater Kushtia district of Bangladesh, where urgent attention for augmentation of irrigation water supply is required. Thematic maps of transmissivity, hydraulic conductivity, specific yield, net recharge, aquifer thickness, surface water bodies, aquifer resistivity, overburden aquitard thickness and its resistivity have been prepared and assigned weight according to their relative importance using Analytical Hierarchical Process for the preparation of groundwater potential model. Since the values within each thematic map vary significantly, they are classified into various ranges or types and assigned ratings. Finally, the thematic maps are integrated using GIS to prepare the groundwater potential map for the study area in terms of Ground Water Potential Index (GWPI). The evolved map indicates that 22.51% of the study area have GWPI more than 0.70 and therefore, have excellent prospective for exploitation. About 69.12% of the area with GWPI ranging from 0.50 to 0.70 is also quite promising for groundwater abstraction, while the rest 8.37% area having GWPI below 0.50 indicates moderate potential. The obtained map of groundwater potential is found in good agreement with the yields of available pumping test data.     

Stiffness identification of two- and three-dimensional frames

Four widely used structural system identification methods are presented. Based on Bayesian estimation theory, two new formulae and their derivations are shown. Time domain responses of two frames when subjected to the ground motion of the El Centro earthquake are computed then transformed to the frequency domain. Frequencies and mode shapes of frames are extracted from Fourier spectra. Using these frequencies and mode shapes, a parametric study is conducted, and the system identification methods are compared and discussed. The importance of a prior analytical model on the rate of convergence of the revised parameters is investigated. Recommendations are given regarding the feasibility of each method for more accurate estimation. A model suitable for parameter identification of three-dimensional frames is presented. This model, with different identification methods, is used to estimate the parameters of a two-storey frame.     

THREE-DIMENSIONAL GEO-MORPHOLOGICAL MODELLING OF ESTUARINE WATERS

1 INTRODUCTION Estuaries and coastal zones have been used as means of navigation, disposal of waste material, fishing and many commercial and economic activities over the centuries. One of the most important phenomena in these regions is the suspended sediment transport, which may cause erosion and deposition, and hence changes in the estuarys morphology. In turn, such changes may lead to problems relating to navigation and estuarine management. When the bed boundary of an estuary change…