Validation of OML,AERMOD/PRIME and MISKAM Using the Thompson Wind-Tunnel Dataset for Simple Stack-Building Configurations

A comprehensive dataset on dispersion behind rectangular buildings has been used to analyse the performance of two dispersion models in respect to their handling of building effects: the Danish OML model and the US AERMOD model with the PRIME building algorithm; additionally, the German MISKAM model has been assessed. OML and AERMOD are regulatory plume models with limited requirements in terms of input and computing resources, whereas MISKAM is a computational fluid dynamical model, and as such much more demanding. For most scenarios considered, the degree of misprediction in respect to the maximum concentrations is less than a factor of two for OML and AERMOD. However, in respect to the concentration at a specific location, especially in the near field, both models often result in larger mispredictions. MISKAM provides more accurate predictions.     

Suspended Matter,Chl-a,CDOM, Grain Sizes,and Optical Properties in the Arctic Fjord-Type Estuary,Kangerlussuaq, West Greenland During Summer

Optical constituents as suspended particulate matter (SPM), chlorophyll (Chl-a), colored dissolved organic matter (CDOM), and grain sizes were obtained on a transect in the arctic fjord-type estuary Kangerlussuaq (66°) in August 2007 along with optical properties. These comprised diffuse attenuation coefficient of downwelling PAR (K _d(PAR)), upwelling PAR (K _u(PAR)), particle beam attenuation coefficient (c _p), and irradiance reflectance R(−0, PAR). PAR is white light between 400 and 700 nm. The estuary receives melt water from the Greenland Inland Ice and stations covered a transect from the very high turbid melt water outlet to clear marine waters. Results showed a strong spatial variation with high values as for suspended matter concentrations, CDOM, diffuse attenuation coefficient K _d(PAR), particle beam attenuation coefficients (c _p), and reflectance R(−0, PAR) at the melt water outlet. Values of optical constituents and properties decreased with distance from the melt water outlet to a more or less constant level in central and outer part of the estuary. There was a strong correlation between inorganic suspended matter (SPMI) and diffuse attenuation coefficient K _d(PAR) (r ² = 0.92) and also for particle beam attenuation coefficient (c _p; r ² = 0.93). The obtained SPMI specific attenuation—K _d^*(PAR) = 0.13 m² g⁻¹ SPMI—and the SPMI specific particle beam attenuation—c _p^* = 0.72 m² g⁻¹—coefficients were about two times higher than average literature values. Irradiance reflectance R(−0, PAR) was comparatively high (0.09−0.20) and showed a high (r ² = 0.80) correlation with K _u(PAR). Scattering dominated relative to absorption—b(PAR)/a(PAR) = 12.3. Results strongly indicated that the high values in the optical properties were related to the very fine particle sizes (mean = 2–6 μm) of the suspended sediment. Data and results are discussed and compared to similar studies from both temperate and tropical estuaries.     

High resolution profiles of vertical particulate organic matter export off Cape Blanc,Mauritania: Degradation processes and ballasting effects

Vertical carbon fluxes between the surface and 2500 m depth were estimated from in situ profiles of particle size distributions and abundances me/asured off Cape Blanc (Mauritania) related to deep ocean sediment traps. Vertical mass fluxes off Cape Blanc were significantly higher than recent global estimates in the open ocean. The aggregates off Cape Blanc contained high amounts of ballast material due to the presence of coccoliths and fine-grained dust from the Sahara desert, leading to a dominance of small and fast-settling aggregates. The largest changes in vertical fluxes were observed in the surface waters (<250 m), and, thus, showing this site to be the most important zone for aggregate formation and degradation. The degradation length scale (L), i.e. the fractional degradation of aggregates per meter settled, was estimated from vertical fluxes derived from the particle size distribution through the water column. This was compared with fractional remineralization rate of aggregates per meter settled derived from direct ship-board measurements of sinking velocity and small-scale O₂ fluxes to aggregates measured by micro-sensors. Microbial respiration by attached bacteria alone could not explain the degradation of organic matter in the upper ocean. Instead, flux feeding from zooplankton organisms was indicated as the dominant degradation process of aggregated carbon in the surface ocean. Below the surface ocean, microbes became more important for the degradation as zooplankton was rare at these depths.     

Retrieval of land surface temperature and emissivity from satellite data: Physics, theoretical limitations and current methods

Remote sensing from satellites is the only means to obtain land surface temperature (LST) and emissivity on a larger scale. LST has many applications, e.g., in radiation budget experiments and global warming, and desertification studies. Over the last decades, substantial amount of research was dedicated towards extracting LST and emissivity from surface-leaving radiance and de-coupling the two from each other. This paper provides the physical basis, discusses theoretical limitations, and gives an overview of the current methods for space-borne passive sensors operating in the infrared range, e.g., NOAA-AVHRR, Meteosat, ERS-ATSR, TERRA-MODIS, and TERRA-ASTER. Atmospheric effects on estimated LST are described and atmospheric-correction using a radiative transfer model (RTM) is explained. The methods discussed are the single channel method, the split window techniques (SWTs), and the multi-angle method.     

Homotopy scattering series for seismic forward modelling with variable density and velocity

We have derived a convergent scattering series solution for the frequency-domain wave equation in acoustic media with variable density and velocity. The convergent scattering series solution is based on the homotopy analysis of a vectorial integral equation of the Lippmann–Schwinger type. By using the Green's function and partial integration, we have derived the vectorial integral equation of the Lippmann–Schwinger type that involves the pressure gradient field as well as the pressure field from the wave equation. The vectorial Lippmann–Schwinger equation can in principle be solved via matrix inversion, but the computational cost of matrix inversion scales like $N^3$, where $N$ is the number of grid blocks. The computational cost can be significantly reduced if one solves the vectorial Lippmann–Schwinger equation iteratively. A simple iterative solution is the Born series, but it is only convergent when the scattering potential is sufficiently small. In this study, we have used the so-called homotopy analysis method to derive an iterative solution for the vectorial Lippmann–Schwinger equation which can be made convergent even in strongly scattering media. The computational cost of our convergent scattering series scales as $N^2$. Our algorithm, which is based on the homotopy analysis method, involves a convergence control operator that we select using hierarchical matrices. We use a three-layer model and a resampled version of the SEG/EAGE salt model to show the performance of the developed convergent scattering series.     

An example of flow differentiation: clinopyroxenite of the Predazzo igneous complex (north Italy)

Chemical, modal and mineralogic data and textural observations suggest that the small mafic-ultramafic body at Predazzo, consisting of olivine-bearing gabbro, clinopyroxenite and quartz-bearing gabbro, is the result of a flow differentiation mechanism acting on a mush formed of 60% solid plus 40% liquid. Such a mechanism was capable of producing the concentration of the early formed crystals ($\text{cpx}\text{+}\text{mt}$) towards the center of the body (clinopyroxenite) with segregation of two portions enriched in liquid toward the margins (olivine- and quartz-bearing gabbros).     

Heterogeneous strain of a phyllite as revealed by porphyroblast-matrix relationships

Garnet porphyroblasts in a homogeneous phyllite specimen from the central Norwegian Caledonides provide insight into the distribution and type of strain which followed the garnet growth. Matrix schistosity is traceable through the porphyroblasts in the form of inclusions which allow the measurement of two parameters: the flattening of the matrix schistosity around the porphyroblasts, and an angle of rotation of the porphyroblasts relative to the matrix schistosity. Both parameters vary considerably as studied in a large thin section cut parallel to mineral lineation and perpendicular to schistosity. Accepting some simplifications and assumptions, it seems necessary to consider the strain as composed of two components: a noncoaxial strain component of a simple-shear type, and an approximately coaxial strain component, both of which are heterogeneously developed on the scale of the thin section. The shear planes of the simple-shear-type strain are likely to lie parallel, or at a very small angle, to the matrix schistosity. The linear fabric of the phyllite seems to be a material expression of the coaxial strain component. The λ₁λ₂ plane of the finite strain ellipsoid most probably varies in orientation across the thin section and is only, by coincidence, parallel to the almost constantly oriented matrix schistosity.     

The Mesozoic–Cenozoic structural framework of the Bay of Kiel area, western Baltic Sea

A dense grid of multichannel high-resolution seismic sections from the Bay of Kiel in the western Baltic Sea has been interpreted in order to reveal the Mesozoic and Cenozoic geological evolution of the northern part of the North German Basin. The overall geological evolution of the study area can be separated into four distinct periods. During the Triassic and the Early Jurassic, E–W extension and the deposition of clastic sediments initiated the movement of the underlying Zechstein evaporites. The deposition ceased during the Middle Jurassic, when the entire area was uplifted as a result of the Mid North Sea Doming. The uplift resulted in a pronounced erosion of Upper Triassic and Lower Jurassic strata. This event is marked by a clear angular unconformity on all the seismic sections. The region remained an area of non-deposition until the end of the Early Cretaceous, when the sedimentation resumed in the area. Throughout the Late Cretaceous the sedimentation took place under tectonic quiescence. Reactivated salt movement is observed at the Cretaceous Cenozoic transition as a result of the change from an extensional to compressional regional stress field. The vertical salt movement influenced the Cenozoic sedimentation and resulted in thin-skinned faulting.     

Airborne geophysical prospecting for ultramafite associated talc, Altermark, northern Norway

Talc-rich rocks in Altermark occur as rims around magnetite bearing serpentinite lenses which are up to about 1 km wide. The content of magnetite in the serpentinite makes magnetic measurements possible as a method for talc-prospecting. In 1991 a helicopter-borne geophysical survey combined with geological and petrophysical mapping was carried out in the Altermark area. Several positive magnetic anomalies were detected. Positive magnetic anomalies with oval shapes, well defined boundaries and smooth anomaly curves were interpreted to be caused by serpentinite lenses. Laboratory measurements revealed susceptibilities for the serpentinites between 0.006−0.36 SI and a Q-value of approximately 0.3. Magnetic modelling of the Nakkan anomaly and subsequent drilling revealed that it was indeed a serpentinite body surrounded by talc rocks which was the cause of the anomaly. The shallowest part was located about 150 m below surface. The geophysical exploration led to the discovery of a talc-carbonate deposit with an anticipated in situ tonnage of more than 1 million tons. The present study consequently proved to be a classical case study where we were able to locate and establish the three-dimensional form of serpentinite bodies associated with talc deposits. We conclude that helicopter-borne geophysical surveying is an effective tool in the exploration of serpentinite cored talc bearing rocks in complex geological areas where exposures are poor or absent and accessibility difficult. The rough topography and dense vegetation in the Altermark area make this type of survey very cost effective.