Airborne gravimetry used in precise geoid computations by ring integration

Two detailed geoids have been computed in the region of North Jutland. The first computation used marine data in the offshore areas. For the second computation the marine data set was replaced by the sparser airborne gravity data resulting from the AGMASCO campaign of September 1996. The results of comparisons of the geoid heights at on-shore geometric control showed that the geoid heights computed from the airborne gravity data matched in precision those computed using the marine data, supporting the view that airborne techniques have enormous potential for mapping those unsurveyed areas between the land-based data and the off-shore marine or altimetrically derived data. Received: 7 July 1997 / Accepted: 22 April 1998     

The Plio-Pleistocene glaciation of the Barents Sea–Svalbard region: a new model based on revised chronostratigraphy

Based on a revised chronostratigraphy, and compilation of borehole data from the Barents Sea continental margin, a coherent glaciation model is proposed for the Barents Sea ice sheet over the past 3.5 million years (Ma). Three phases of ice growth are suggested: (1) The initial build-up phase, covering mountainous regions and reaching the coastline/shelf edge in the northern Barents Sea during short-term glacial intensification, is concomitant with the onset of the Northern Hemisphere Glaciation (3.6–2.4 Ma). (2) A transitional growth phase (2.4–1.0 Ma), during which the ice sheet expanded towards the southern Barents Sea and reached the northwestern Kara Sea. This is inferred from step-wise decrease of Siberian river-supplied smectite-rich sediments, likely caused by ice sheet blockade and possibly reduced sea ice formation in the Kara Sea as well as glacigenic wedge growth along the northwestern Barents Sea margin hampering entrainment and transport of sea ice sediments to the Arctic–Atlantic gateway. (3) Finally, large-scale glaciation in the Barents Sea occurred after 1 Ma with repeated advances to the shelf edge. The timing is inferred from ice grounding on the Yermak Plateau at about 0.95 Ma, and higher frequencies of gravity-driven mass movements along the western Barents Sea margin associated with expansive glacial growth.     

Shaking and splashing—A case study of far-field effects of the Mjølnir asteroid impact on depositional environments in the Barents Sea

The Mjølnir impact crater in the Norwegian Barents Sea features among the 20 largest impact craters listed in the Earth Impact Database. The impact is dated to 142 ± 2.6 Ma, corresponding closely to the Jurassic/Cretaceous boundary in the Boreal stratigraphy. Multidisciplinary studies carried out over the last three decades have suggested that the up to 40 km wide crater was created by a 1–3 km diameter impactor colliding with a shallow epicontinental sea, causing regional havoc and a regional ecological crisis that followed in its wake. Only minor evidence for the consequences of the impact for the surrounding depositional basins has been documented so far. This study describes a large submarine slump penetrated by hydrocarbon exploration well 7121/9-1, located in the southern Hammerfest Basin and approximately 350 km away from the impact site. The slump is dated by a black shale drape, which contains characteristic impact-related biotic assemblages and potential ejecta material. This precise dating enables us to associate the slump with large-scale fault movements and footwall collapse along the basin-bounding Troms-Finnmark Fault Complex, which we conclude were caused by shock waves from the Mjølnir impact and the passage of associated tsunami trains. The draping black shale is interpreted to represent significant reworking of material from the contemporary seabed by tsunamis and currents set up by the impact.     

Petroleum geoscience in Norden - exploration, production and organization

Offshore exploration in Norway and Denmark-in the North Sea, the Norwegian Sea and the Barents Sea-has involved drilling about 850 wildcat wells, resulting in about 300 oil and gas finds, of which 84 are fields with production. The recoverable resources of all these finds total about 65 billion barrels of oil equivalent. Almost all these hydrocarbons come from a Jurassic source and the main reservoirs and traps are Jurassic sandstones in fault blocks and Paleocene sandstones or Cretaceous chalks in gentle domes. The article describes four major fields-Ekofisk, Gullfaks, Ormen Lange and SnФhvitto illustrate some of the many challenges in developing and producing the hydrocarbons.
Elsewhere in Norden, there has been much less exploration. Drilling results have mostly been negative in mainland Sweden, onshore Denmark, onshore Svalbard and on- and offshore West Greenland. Minor oil finds have been made in Palaeozoic rocks in the Baltic Sea. The first wells have recently been drilled off the Faroe Islands, resulting in one discovery. No drilling has taken place on- or offshore East Greenland.
As a result of the hydrocarbon activities in Norway and Denmark, petroleum geoscience there has flourished, with 2000 geoscientists currently employed in the industry, many technical innovations made, a wealth of publically available information and a great increase in the understanding of the geology.     

Towards a 4D topographic view of the Norwegian sea margin

The present-day topography/bathymetry of the Norwegian mainland and passive margin is a product of complex interactions between large-scale tectonomagmatic and climatic processes that can be traced back in time to the Late Silurian Caledonian Orogeny. The isostatic balance of the crust and lithosphere was clearly influenced by orogenic thickening during the Caledonian Orogeny, but was soon affected by post-orogenic collapse including overprinting of the mountain root, and was subsequently affected by a number of discrete extensional events eventually leading to continental break-up in Early Eocene time. In the mid-Jurassic the land areas experienced deep erosion in the warm and humid climate, forming a regional paleic surface. Rift episodes in the Late Jurassic and Early Cretaceous, with differential uplift along major fault zones, led to more pronounced topographic contrasts during the Cretaceous, and thick sequences of clastic sediments accumulated in the subsiding basins on the shelf. Following renewed extension in the Late Cretaceous, a new paleic surface developed in the Paleocene. Following break-up the margin has largely subsided thermally, but several Cenozoic shortening events have generated positive contraction structures. On the western side of the on-shore drainage divide, deeper erosion took place along pre-existing weakness zones, creating the template of the present day valleys and fjords. In the Neogene the mainland and large portions of the Barents Sea were uplifted. It appears that this uplift permitted ice caps to nucleate and accumulate during the Late Pliocene northern hemisphere climatic deterioration. The Late Pliocene to Pleistocene glacial erosion caused huge sediment aprons to be shed on to the Norwegian Sea and Barents Sea margins. Upon removal of the ice load the landmass adjusted isostatically, and this still continues today.     

High‐resolution reconstruction of a coastal barrier system: impact of Holocene sea‐level change

This study presents a detailed reconstruction of the sedimentary effects of Holocene sea‐level rise on a modern coastal barrier system. Increasing concern over the evolution of coastal barrier systems due to future accelerated rates of sea‐level rise calls for a better understanding of coastal barrier response to sea‐level changes. The complex evolution and sequence stratigraphic framework of the investigated coastal barrier system is reconstructed using facies analysis, high‐resolution optically stimulated luminescence and radiocarbon dating. During the formation of the coastal barrier system starting 8 to 7 ka rapid relative sea‐level rise outpaced sediment accumulation. Not before rates of relative sea‐level rise had decreased to ca 2 mm yr^?1 did sediment accumulation outpace sea‐level rise. From ca 5·5 ka, rates of regionally averaged sediment accumulation increased to 4·3 mm yr^?1 and the back‐barrier basin was filled in. This increase in sediment accumulation resulted from retreat of the barrier island and probably also due to formation of a tidal inlet close to the study area. Continued transgression and shoreface retreat created a distinct hiatus and wave ravinement surface in the seaward part of the coastal barrier system before the barrier shoreline stabilized between 5·0 ka and 4·5 ka. Back‐barrier shoreline erosion due to sediment starvation in the back‐barrier basin was pronounced from 4·5 to 2·5 ka but, in the last 2·5 kyr, barrier sedimentation has kept up with and outpaced sea‐level. In the last 0·4 kyr the coastal barrier system has been prograding episodically. Sediment accumulation shows considerable variation, with periods of rapid sediment deposition and periods of non‐deposition or erosion resulting in a highly punctuated sediment record. The study demonstrates how core‐based facies interpretations supported by a high‐resolution chronology and a well‐documented sea‐level history allow identification of depositional environments, erosion surfaces and hiatuses within a very homogeneous stratigraphy, and allow a detailed temporal reconstruction of a coastal barrier system in relation to sea‐level rise and sediment supply.     

Rocket-borne and groundbased observations of coincident field-aligned currents,electron beams,and plasma density enhancements in the afternoon auroral oval

Results are reported from a rocket experiment conducted at Søndre Strømfjord, Greenland, on 22 August 1976, at 16.00 M.L.T. A series of plasma, particles, and fields and wave experiments were carried on board the payload, and the venture was supported by data from the AE-C satellite and by groundbased ionosondes and magnetometers at the launch site and at Godhavn. Two regions of field-aligned electron precipitation, electron density and temperature enhancements, and field-aligned upflowing current sheets were intercepted by the rocket. The density enhancements were also observed by groundbased ionosondes. Significant discrepancies were found between the currents carried by the streaming electrons in the 0.15–10 keV range and the upflowing currents seen by the on board magnetometer, suggesting that the upflowing current could not be the primary driver of the electron acceleration mechanism. The E-region was unstable to the combined Gradient-Drift and Farley-Buneman instability, and plasma turbulence was observed in situ, but the absolute density fluctuations were too small to return detectable HF-radar power to the ground.     

Glacial and environmental changes over the last 60 000 years in the Polar Ural Mountains,Arctic Russia,inferred from a high‐resolution lake record and other observations from adjacent areas

Our knowledge about the glaciation history in the Russian Arctic has to a large extent been based on geomorphological mapping supplemented by studies of short stratigraphical sequences found in exposed sections. Here we present new geochronological data from the Polar Ural Mountains along with a high‐resolution sediment record from Bolshoye Shchuchye, the largest and deepest lake in the mountain range. Seismic profiles show that the lake contains a 160‐m‐thick sequence of unconsolidated lacustrine sediments. A well‐dated 24‐m‐long core from the southern end of the lake spans the last 24 cal. ka. From downward extrapolation of sedimentation rates we estimate that sedimentation started about 50–60 ka ago, most likely just after a large glacier had eroded older sediments from the basin. Terrestrial cosmogenic nuclide (TCN) exposure dating (¹⁰Be) of boulders and Optically Stimulated Luminescence (OSL) dating of sediments indicate that this part of the Ural Mountains was last covered by a coherent ice‐field complex during Marine Isotope Stage (MIS) 4. A regrowth of the glaciers took place during a late stage of MIS 3, but the central valleys remained ice free until the present. The presence of small‐ and medium‐sized glaciers during MIS 2 is reflected by a sequence of glacial varves and a high sedimentation rate in the lake basin and likewise from ¹⁰Be dating of glacial boulders. The maximum extent of the mountain glaciers during MIS 2 was attained prior to 24 cal. ka BP. Some small present‐day glaciers, which are now disappearing completely due to climate warming, were only slightly larger during the Last Glacial Maximum (LGM) as compared to AD 1953. A marked decrease in sedimentation rate around 18–17 cal. ka BP indicates that the glaciers then became smaller and probably disappeared altogether around 15–14 cal. ka BP.     

How does water near clay mineral surfaces influence the rock physics of shales?

Clays and clay‐bearing rocks like shale are extremely water sensitive. This is partly due to the interaction between water and mineral surfaces, strengthened by the presence of nanometer‐size pores and related large specific surface areas. Molecular‐scale numerical simulations, using a discrete‐element model, show that shear rigidity can be associated with structurally ordered (bound or adsorbed) water near charged surfaces. Building on these and other molecular dynamics simulations plus nanoscale experiments from the literature, the water monolayer adjacent to hydrophilic solid surfaces appears to be characterised by shear stiffness and/or enhanced viscosity. In both cases, elastic wave propagation will be affected by the bound or adsorbed water. Using a simple rock physics model, bound water properties were adjusted to match laboratory measured P‐ and S‐wave velocities on pure water‐saturated kaolinite and smectite. To fit the measured stress sensitivity, particularly for kaolinite, the contribution from solid‐grain contact stiffness needs to be added. The model predicts, particularly for S‐waves, that viscoelastic bound water could be a source of dispersion in clay and clay‐rich rocks. The bound‐water‐based rock physics model is found to represent a lower bound to laboratory‐measured velocities obtained with shales of different mineralogy and porosity levels.