Surface dynamic deformation estimates from local seismicity: the Itoiz reservoir,Spain

We analyze the ground motion time histories due to the local seismicity near the Itoiz reservoir to estimate the near-source, surface 3D displacement gradients and dynamic deformations. The seismic data were obtained by a semipermanent broadband and accelerometric network located on surface and at underground sites. The dynamic deformation field was calculated by two different methodologies: first, by the seismo-geodetic method using the data from a three-station microarray located close to the dam, and second, by single station estimates of the displacement gradients. The dynamic deformations obtained from both methods were compared and analyzed in the context of the local free-field effects. The shallow 1D velocity structure was estimated from the seismic data by modeling the body wave travel times. Time histories obtained from both methods result quite similar in the time window of body wave arrivals. The strain misfits between methods vary from 1.4 to 35.0 % and rotational misfits vary from 2.5 to 36.0 %. Amplitudes of displacement gradients vary in the range of 10^?8 to 10^?7 strains. From these results, a new scaling analysis by numerical modeling is proposed in order to estimate the peak dynamic deformations for different magnitudes, up to the expected maximum M _w in the region (M5.5). Peak dynamic deformations due to local M _w5.5 earthquakes would reach amplitudes of 10^?5 strain and 10^?3 radians at the Itoiz dam. The single station method shows to be an adequate option for the analysis of local seismicity, where few three-component stations are available. The results obtained here could help to extend the applicability of these methodologies to other sites of engineering interest.     

Numerically based proposals for the stiffness and strength of masonry infills with openings in reinforced concrete frames

Aimed at investigating the effect of openings on the in‐plane behaviour of masonry infills in reinforced concrete frames, a parametric study is presented based on model calibration via experimental tests. Two types of openings are investigated: central window openings and different combinations of door and window openings based on the typologies of southern European countries. First, a finite element model of the structure is made using the DIANA software program. Then, after calibration with experimental results, a parametric analysis is carried out to investigate the effect of the presence and location of the different types of openings on the in‐plane behaviour of the infilled frame. Finally, different equations for predicting the initial stiffness and lateral strength of infilled frames with any types of openings were obtained. An α factor related to the geometry of the piers between openings is proposed to take into account the location of the openings in the developed equations. Subsequently, the masonry infill panel is replaced by a diagonal strut. An empirical equation is also proposed for the width of an equivalent strut to replace a masonry infill panel with openings in such a way that they possess the same initial stiffness. Copyright © 2015 John Wiley & Sons, Ltd.     

Hydrological response of an afforested catchment in a Mediterranean humid mountain area: a comparative study with a natural forest

The effects of afforestation on water resources are still controversial. The aim of this paper is to (i) analyse the hydrological response of an afforested area in the Central Pyrenees and (ii) compare the hydrological response of an afforested area with the response observed in a natural undisturbed forest. The Araguás catchment was cultivated until the 1950s, and then afforested with pines in an effort to control the active degradation processes. The hydrological response was variable and complex, because the discharge was generated by a combination of distinct runoff processes. The hydrological response showed that (i) afforestation produced moderate peak discharges, stormflows and recession limbs, and long rising limbs; (ii) no one single variable was able to explain the hydrological response: rainfall volume and intensity did not explain the hydrological response and antecedent rainfall and initial discharge (indicating antecedent moisture conditions) did play an important role; (iii) seasonal differences were observed suggesting different runoff generating processes; and (iv) the effect of forest cover on peak discharges became less important as the size of the hydrological event increased. The stormflow coefficient showed a clear seasonal pattern with an alternation between a wet period, when the catchment was hydrologically responsive, and a dry summer period when the catchment rarely responded to any event, and two transitional periods (wetting and drying). Compared with a natural forest, the afforested area recorded greater flows and peak discharges, faster response times and shorter recession limbs. Afforestation reduces the water yield and the number of floods compared with non‐vegetated areas and abandoned lands. Copyright © 2016 John Wiley & Sons, Ltd.     

Geomorphic monitoring and response to two dam removals: rivers Urumea and Leitzaran (Basque Country,Spain)

Dam removal has been demonstrated to be one of the most frequent and effective fluvial restoration actions but at most dam removals, especially of small dams, there has been little geomorphological monitoring. The results of the geomorphological monitoring implemented in two dams in the rivers Urumea and Leitzaran (northern Spain) are presented. The one from the River Urumea, originally 3.5 m high and impounding 500 m of river course, was removed instantaneously whereas that in the River Leitzaran, 12.5 m high, and impounding 1500 m of river course, is in its second phase of a four‐stage removal process. Changes in channel morphology, sediment size and mobility and river bed morphologies were assessed. The monitoring included several different techniques: topographical measurements of the channel, terrestrial laser scanner measurements of river bed and bars, sediment grain size and transport; all of them repeated in four (May, August, November 2011 and May 2012) and five (July and September 2013, April and August 2014 and June 2015) fieldwork campaigns in the River Urumea and River Leitzaran, respectively. Geomorphic responses of both dam removals are presented, and compared. Morphological channel adjustments occurred mainly shortly after dam removals, but with differences among the one removed instantaneously, that was immediate, whereas that conducted by stages took longer. Degradational processes were observed upstream of both dams (up to 1.2 m and 4 m in the River Urumea and River Leitzaran, respectively), but also aggradational processes (pool filling), upstream of Inturia Dam (2.85 m at least). Less evident aggradational processes were observed downstream of the dams (up to 0.37 m and 0.50 m in the River Urumea and River Leitzaran, respectively). Flood events, especially a 100 year flood registered during the monitoring period of Mendaraz Dam removal, reactivated geomorphological processes as incision and bank erosion, whereas longitudinal profile recovery, grain‐size sorting and upstream erosion took longer. Copyright © 2016 John Wiley & Sons, Ltd.     

Dynamic behavior of buildings with non-uniform stiffness along their height assessed through coupled flexural and shear beams

A novel model for assessing building behavior has been developed by coupling a Bernoulli beam with a quartic stiffness variation and a shear beam with a parabolic stiffness variation, trends that are expected in buildings designed for earthquake actions. Then the partial differential equation of motion governing the behavior of the model has been solved, obtaining analytic expressions (Closed form solutions) for mode shapes in terms of Legendre functions. These closed form solutions were validated with finite element model analyses and effects of non-uniformity of stiffness were assessed in a generalized manner. It was found that period lengthening is mild for the first mode, but for higher modes can be far more noticeable if shear stiffness at beam top is <20 % of its base value. Mode shapes also change notoriously for reductions beyond the same limit, potentially inducing large floor acceleration demands at unexpected locations. Also it was found that drift demands can be noticeably enhanced even if shear stiffness at top is 75 % of the base value, in what would be considered uniform buildings. This model has several applications for assessing the response or large stocks of buildings, calibrate complex models, assess damage on building contents, establishing in short time damage scenarios for large cities, and could be helpful for education, as emphasis is brought back on fundamental concepts.     

Reassessment of intensity estimates from vulnerability and damage distributions: the 2011 Lorca earthquake

This paper presents a reassessment of the seismic intensity estimated for the 2011 Lorca (southeastern Spain) earthquake based on detailed vulnerability data and its comparison with the observed damage. Building and urban data are gathered in selected areas during a field campaign and are completed with office work. The significance of vulnerability modifiers in the final vulnerability distribution is analyzed, and their relation with observed damage trends is explored. A direct application of the vulnerability modifiers is not capable of reproducing the observed damage patterns. A significant increase of vulnerability related to the performance of buildings presenting soft story is required to reach a damage distribution consistent with intensity estimates in the study areas. Accordingly, an intensity increase in certain study zones (as compared to other areas of the city of Lorca) is suggested. Although the approach followed in this study is applied in a city of Spain, it can be extrapolated to other areas where detailed vulnerability assessment is feasible and damage data are available.