Geophysical experiments to image the shallow internal structure and the moisture distribution of a mine waste rock pile

Several field surveys of a waste rock pile were carried out during the summers of 2002 and 2003 using ground-penetrating radar, electromagnetic conductivity and DC resistivity imaging. The waste rock deposit is prone to generate acid mine drainage (AMD) due to the oxidation of sulphidic minerals. One of the most critical factors that lead to the production of AMD is unsaturated water flow and the ensuing moisture distribution in the waste rock. This geophysical characterization study, performed over a 30 m × 30 m test zone, was designed to image the internal structure controlling the water flux at shallow depth. The subsurface was found to consist of three zones for the first 6 m of the pile, mainly based on electrical resistivities: a thin superficial conductive material, an intermediate 2 to 3 m thick highly resistive zone, and a lower, more conductive medium. With the help of hydrogeological tests, chemical analyses and two 2.5 m-deep trenches, it is shown that the two conductive zones are correlated with fine-grained waste rock and the resistive zone correlates with a coarser material. In the two deeper zones, the contact between the two types of waste rock is typically highlighted by a sharp resistive/conductive boundary. An increase of conductance in the relatively thin upper layer towards the edge of the pile appears to be caused by an increase in thickness of the fine-grained material. Additional geophysical surveys carried out on a profile along the flank of the upper bench of the pile show that the main features of the internal structure are sub-parallel to the slope, at least for the first 3 m in depth. The data also show an increase in resistivity from the top to bottom of the slope, in accordance with expected particle segregation, from fine-grained material at the top to coarser material at the bottom. Wide-angle reflection GPR monitoring during large scale infiltration tests seems to indicate preferential flow paths towards the direction of coarser, more pervious material (which also appears to be less oxidized). Water preferentially flows through the coarse-grained material, but it is stored by capillary forces in the fine-grained material. Apart from the deposition methods, the results strongly suggest that factors such as machinery-induced mechanical alteration, construction history of the pile, and increased oxidization near the edges could explain the resistivity model. The model interpreted from geophysical imaging agrees well with the conceptual model of the rock pile. The resistivity and GPR methods appear to be efficient geophysical methods to characterize the internal structure and preferential flow patterns within unsaturated waste rock piles.     

Electrochemical simulations of mass transfer from isolated wet spots and droplets on realistic fluttering leaves

This paper reports on forced-convection mass transfer from isolated discs on rectangular plates as well as hemispheres on realistic fluttering leaves. An electrochemical method was used where the convective transfer of ions to the test electrode (the droplet or the wet spot) in an electrolytic flow system was measured as a function of flow rates, sizes of discs and hemispheres. Measurements showed that the local transfer coefficient for uniformly transferring plates varied as expected while the transfer from isolated discs on plates was much less a function of the distance from the leading edge. An expression to describe the transfer coefficient for an isolated disc as a function of distance from the leading edge was determined. An expression describing the transfer from hemispherical drops on fluttering leaves was derived and compared with the predictions from transfer theory for a sphere in free space.     

Forward-in-time and Backward-in-time Dispersion in the Convective Boundary Layer: the Concentration Footprint

The turbulence field obtained using a large-eddy simulation model is used to simulate particle dispersion in the convective boundary layer with both forward-in-time and backward-in-time modes. A Lagrangian stochastic model is used to treat subgrid-scale turbulence. Results of forward dispersion match both laboratory experiments and previous numerical studies for different release heights in the convective boundary layer. Results obtained from backward dispersion show obvious asymmetry when directly compared to results from forward dispersion. However, a direct comparison of forward and backward dispersion has no apparent physical meaning and might be misleading. Results of backward dispersion can be interpreted as three-dimensional or generalized concentration footprints, which indicate that sources in the entire boundary layer, not only sources at the surface, may influence a concentration measurement at a point. Footprints at four source heights in the convective boundary layer corresponding to four receptors are derived using forward and backward dispersion methods. The agreement among footprints derived with forward and backward methods illustrates the equivalence between both approaches. The paper shows explicitly that Lagrangian simulations can yield identical footprints using forward and backward methods in horizontally homogeneous turbulence.     

Chironomid-inferred temperature changes of the last century in anoxic Seebergsee,Switzerland: assessment of two calibration methods

Chironomids (non-biting midges) can provide accurate climate reconstructions from the Late Glacial to the present. Until now, anoxic lakes have been avoided for temperature reconstructions since chironomid assemblages are sensitive to changes in oxygen concentrations in the hypolimnion. However, anoxic lakes may have varved sediments, providing the possibility for near-annual climate reconstructions. Here, we tested the applicability of two calibration methods to reconstruct mean July air temperatures from chironomid assemblages preserved in the sediments of the anoxic Seebergsee located in the northern Swiss Alps: a calibration-in-space approach and a calibration-in-time approach. The calibration-in-space approach (i.e. chironomid assemblages from surficial lake sediments (0–1 cm) calibrated against meteorological data) provided accurate inferences (i.e. similar temperature changes as measured at the closest meteorological station, and at regional stations) in the Seebergsee stratigraphy until anoxia increased in the lake. With the increase of anoxia, the chironomid-inferred temperatures were generally colder than measured temperatures. A calibration-in-time approach (i.e. calibration of chironomid assemblages in a time series against instrumental data from the closest meteorological station) provided accurate reconstructions (i.e. similar to the regional records) for the past 100 years, including the time period of inferred anoxia. However, its applicability should be further tested on longer temporal scales.     

A new experimental technique for extracting liquids from peridotite at very low degrees of melting: application to partial melting of depleted peridotite

A new technique that allows extraction of liquids from peridotite at degrees of melting as low as 0.2 wt% is presented. Microfractures that formed in the graphite sample container at the beginning of the experiments were used as traps for the liquid phase. Glass-filled cracks (or 'microdikes') unaffected by quench crystallisation were produced in all experiments and were analysed using standard electron microprobe techniques. Reversal experiments demonstrated that, at moderate degrees of melting (4.4 and 6.5 wt%), the segregated liquid was in equilibrium with the neighbouring peridotite. At very low degrees of melting (0.3 wt%), the liquid in the microdikes failed to fully equilibrate with the peridotite after 5 days and the sandwich technique was used in combination with the microdike technique to approach more closely the equilibrium composition of near-solidus partial melts. The microdike technique was used to study melting of a depleted peridotite at 1 GPa and 1,220 to 1,360 °C.Editorial responsibility: T.L. Grove     

A laboratory study of covers made of low-sulphide tailings to prevent acid mine drainage

Covers with capillary barrier effects (CCBE) are considered to be one of the most effective ways to control acid mine drainage (AMD) production from mine wastes. The use of low-sulphide tailings in CCBE has been proposed recently for cases where other types of material may be unavailable near the mining site. This paper presents leaching column test results showing that CCBEs with a moisture-retaining layer made of slightly reactive tailings, with three different sulphide contents, can effectively limit the production of AMD from the acid-generating tailings placed underneath. With these layered covers, the leachate pH was maintained near neutrality throughout the testing period. When compared to uncovered tailings, the efficiency of the cover systems for reducing the amount of contaminants in the percolated water was determined to be greater than 99% for zinc, copper and iron. This study shows that the use of low-sulphide tailings can improve the ability of a CCBE to limit gas diffusion by consuming a fraction of the migrating oxygen.