Petrogenesis of Rabor-Lalehzar magmatic rocks (SE Iran): Constraints from whole rock chemistry and Sr-Nd isotopes

The Urumieh-Dokhtar magmatic arc (UDMA) of Central Iran has been formed during Neotethyan Ocean subduction underneath Eurasia. The Rabor-Lalehzar magmatic complex (RLMC), covers an area ～1000?km² in the Kerman magmatic belt (KMB), SE of UDMA. RLMC magmatic rocks include both granitoids and volcanic rocks with calc-alkaline and adakitic signatures but with different ages.Miocene adakitic rocks are characterd by relatively enrichmented in incompatible elements, high (Sr/Y)_(N) (>40), and (La/Yb)_(N) (>10) ratios with slightly negative Eu anomalies (Eu_N/Eu*≈ 0.9), depletion in HFSEs, and relatively non-radiogenic Sr isotope signatures (⁸⁷Sr/⁸⁶Sr?=?0.7048–0.7049). In contrast, the Oligocene granitoids exhibit low Sr/Y (<20) and La/Yb (<9) ratios, negative Eu anomalies (Eu_N/Eu*?≈?0.5), and enrichment in HFSEs and radiogenic Sr isotope signatures (⁸⁷Sr/⁸⁶Sr?=?0.7050–0.7052), showing affinity to the island arc rocks. Eocene volcanic rocks which crusscut the younger granitoid rocks comprise andesites and dacites. Geochemically, lavas show calc-alkaline character without any Eu anomaly (Eu_N/Eu*?≈?1.0). Based on the geochemical and isotopic data we propose that melt source for both calc-alkaline and adakitic rocks from the RLMC can be related to the melting of a sub-continental lithospheric mantle (SCLM). Basaltic melts derived from a metasomatized mantle wedge might be emplaced at the mantle-crust boundary and formed the juvenile mafic lower crust. However, some melts fractionated in the shallow magma chambers and continued to rise forming the volcanic intermediate-mafic rocks at the surface. On the other hand, the assimilation and fractional crystallization in the shallow magma chambers of may have been responsible for the development of Oligocene granitoids with calc-alkaline affinity. In the mid-Late Miocene, following the collision between Afro-Arabia and Iranian block the juvenile mafic crust of UDMA underwent thickening and metamorphosed into garnet-amphibolites. Subsequent upwelling of a hot asthenosphere during Miocene was responsible for partial melting of thickened juvenile crust of the SE UDMA (RLM complex). The adakitic melts ascended to the shallow crust to form the adakitic rocks in the KMB.     

Paleoseismological Analysis Along the Astara Fault System (Talesh Mountain, North Iran)

The Astara Fault System(AFS) is located in the northwest Alborz, east of Talesh Mountain(TM) and west of the South Caspian Basin(SCB). The AFS is one of the basement rock faults in Iran that is heavily involved in seismotectonic activity of the Talesh region, and to which subsidence of the SCB is attributed. There is little information available concerning previous AFS seismic activities and its properties. In order to elucidate the seismic behavior and activities of the AFS, we conducted a research study on paleoseismology of the fault. Based on paleoseismic evidence, two scenarios could be taken into consideration, one of which has three and another has four seismic events with magnitudes Mw in the range of 6.7 to 7.2. Evidence of these seismic events is within sedimentary succession as they have occurred during the past 3 ka(this age is determined based on the deposition rate of the region). Six carbon samples were taken for C~(14) age determination tests, the results of which clearly demonstrated that the EvIV(scenario A) and EvⅢ(scenario B) had occurred before 27,444 cal BP, while other events occurred in the time period between 27,444 cal BP and 3 ka ago. If we consider the occurrence of three or four seismic events(based on the two scenarios) to be between 27,444 cal BP and 3 ka ago, the average recurrence interval is 7,119 ± 1,017, but evidence for these events has been removed. If we assume EvI to be the youngest event(in both scenarios), the minimum elapsed time is therefore 3 ka.     

A new depression‐dominated delineation (D‐cubed) method for improved watershed modelling

Prior to hydrologic modelling, topographic features of a surface are derived, and the surface is divided into sub‐basins. Surface delineation can be described as a procedure, which leads to the quantitative rendition of surface topography. Different approaches have been developed for surface delineation, but most of them may not be applicable to depression‐dominated surfaces. The main objective of this study is to introduce a new depression‐dominated delineation (D‐cubed) method and highlight its unique features by applying it to different topographic surfaces. The D‐cubed method accounts for the hierarchical relationships of depressions and channels by introducing the concept of channel‐based unit (CBU) and its connection with the concept of puddle‐based unit (PBU). This new delineation method implements a set of new algorithms to determine flow directions and accumulations for puddle‐related flats. The D‐cubed method creates a unique cascaded channel‐puddle drainage system based on the channel segmentation algorithm. To demonstrate the capabilities of the D‐cubed method, a small laboratory‐scale surface and 2 natural surfaces in North Dakota were delineated. The results indicated that the new method delineated different surfaces with and without the presence of depressional areas. Stepwise changes in depression storage and ponding area were observed for the 3 selected surfaces. These stepwise changes highlighted the dynamic filling, spilling, and merging processes of depressions, which need to be considered in hydrologic modelling for depression‐dominated areas. Comparisons between the D‐cubed method and other methods emphasized the potential consequences of use of artificial channels through the flats created by the depression‐filling process in the traditional approaches. In contrast, in the D‐cubed method, sub‐basins were further divided into a number of smaller CBUs and PBUs, creating a channel‐puddle drainage network. The testing of the D‐cubed method also demonstrated its applicability to a wide range of digital elevation model resolutions. Consideration of CBUs, PBUs, and their connection provides the opportunity to incorporate the D‐cubed method into different hydrologic models and improve their simulation of topography‐controlled runoff processes, especially for depression‐dominated areas.     

Hydrochemical Characteristics and Sodification of Groundwater in the Shirin Sou, Hamedan, Western Iran

Salinity and sodicity of groundwater are the principal water quality concerns in irrigated areas of arid and semi-arid regions. The hydrochemical characteristics and sodicity of groundwater in the Shirin Sou area, western Iran were investigated in this study by chemical analyses of groundwater samples from 49 wells. Chemical analysis of the groundwater showed that the mean concentration of the cations was in the order: Na⁺ > Ca²⁺ > Mg²⁺ > K⁺, while that for anions was SO₃ ²⁻ > Cl⁻ > HCO₃ ⁻ > NO₃ ⁻. The most prevalent water type is Na–SO₄ followed by water types Na–Cl and Ca–SO₄. The chemical evolution of groundwater is primarily controlled by water–rock interactions: mainly weathering of aluminosilicates, dissolution of sulfate minerals, and cation exchange reactions. Sulfate dissolution and pyrite weathering may both contribute to the SO₄ ²⁻ load of the groundwater. High Na⁺ concentrations in groundwater participate in ion-exchange processes, resulting in the displacement of base cations into solution and raised concentrations in groundwater. The principal component analysis (PCA) performed on groundwater identified three principal components controlling variability of groundwater chemistry. Electrical conductivity, Ca²⁺, Mg²⁺, Na⁺, SO₄ ²⁻, and Cl⁻ content were associated in the same component (PC1) (salinity), most likely linked to anthropogenic activities.     

A new indicator of elastic spectral shape for the reliable selection of ground motion records

How to select a limited number of ground motion records (GMRs) is an important challenge for the non‐linear analysis of structures. Since epsilon (ε_Sa) is an indicator of spectral shape, which has a significant correlation with the non‐linear response of a structure, the selection of GMRs based on the hazard‐related target ε_Sa is a reasonable approach. In this paper, an alternative indicator of spectral shape is proposed, which results in a more reliable prediction of the non‐linear response for the structures with the natural period of 0.25 to 3.0 s. This new parameter, named eta (η), is a linear combination of ε_Sa and the peak ground velocity epsilon (ε_PGV). It is shown that η, as a non‐linear response predictor, is remarkably more efficient than the well‐known and convenient parameter ε_Sa. The influence of η‐filtration in the collapse analysis of an eight‐story reinforced concrete structure with special moment‐resisting frames was studied. Statistical analysis of the results confirmed that the difference between ε‐filtration and η‐filtration can be very significant at some hazard levels. In the case of this structure, the resulting annual frequency of collapse was found to be lower in the case of η‐based record selection, in comparison with the ε‐based record‐selection approach. Copyright © 2011 John Wiley & Sons, Ltd.     

Uncertainty and Reliability Analysis Applied to Slope Stability: A Case Study From Sungun Copper Mine

Nowadays, there are many new methods for slope stability analysis; including probabilistic methods assessing geotechnical uncertainties to develop safety factors. In this paper, a reliability index analysis for the Sungun copper mine slope stability is evaluated based on three methods of uncertainties consisting Taylor series method, Rosenblueth point estimate method and Monte-Carlo simulation method. Sungun copper mine will be one of the Iran’s biggest mines with final pit’s height of 700 meters. For this study two of its main slopes were assessed, one dipping to the NE (030) and the other to the SE (140). Probability density function of cohesion and angle of friction for the slopes were developed using limit equilibrium methods. These shear strengths were then used to determine the probability density function of safety factor and reliability index using the probabilistic methods. Results of the probabilistic analysis indicate that with ascending values of the uncertainties the reliability index decreases. Furthermore, it was determined that with the Monte Carlo simulation the seed number used has little effect on the reliability index of the safety factor especially with seed numbers in excess of 1200. Variations in the overall reliability index of safety factor were observed between the two slopes and this difference is explained by the differences in complexities of the geology within the cross-section.     

Palynostratigraphy and paleoenvironmental significance of the Cretaceous succession in the Gebel Rissu-1 well,north Western Desert,Egypt

Palynological investigation of the Cretaceous Abu Roash, Bahariya, Kharita, Alamein, Alam El Bueib and Betty formations, encountered in the Gebel Rissu-1 well, north Western Desert, Egypt yielded 27 species of pteridophytic spores, 24 of gymnosperm pollen, 25 of angiosperm pollen and 11 of dinoflagellate cysts in addition to some acritarchs, foraminiferal test linings and freshwater algae. This enabled us to recognize five miospore biozones arranged from youngest to oldest as: Classopollis brasiliensis–Afropollis cf. kahramanensis–Dichastopollenites ghazalataensis Assemblage Zone (Late Cenomanian); Elaterosporites klaszii–Sofrepites legouxae–Afropollis jardinus Assemblage Zone (Middle/Late Albian–Early Cenomanian); Pennipollis peroreticulatus–Duplexisporites generalis-Tricolpates Assemblage Zone (Early Aptian–Early Albian); Tucanopollis crisopolensis–Afropollis sp. Assemblage Zone (Barremian) and Appendicisporites cf. tricornitatus–Ephedripites spp. Assemblage Zone (Late Neocomian).The Early Cretaceous Kharita, Alam El Bueib and the Betty formations encountered in the Gebel Rissu-1 well are interpreted to indicate oxic proximal and distal shelf deposits, characterized by type III/IV, V kerogen, which is gas prone but having little potential to produce hydrocarbons. The Upper Cretaceous Abu Roash and Bahariya formations are characterized by a distal suboxic–anoxic and marginal dysoxic–anoxic environment, and their kerogen type III/II indicates gas/oil prone nature. The Bahariya and Kharita Albian–Cenomanian sediments in the present study witnessed the onset of a semi-arid to arid climate, with local or seasonal humid conditions, based on the continuous high abundance of the elaterates pollen and Afropollis-producing plants that inhabited the paleotropical humid coastal plains.     

Using fuzzy TOPSIS method for mineral processing plant site selection

Site selection for the mineral processing is the most important decision made by owner that has a significant impact on the efficiency of the whole process. This is a critical decision which involves considering a number of criteria and finding the best location among feasible alternatives. Therefore, a multicriteria decision-making method is necessary to apply site-selection process to find the best location that meet desired conditions set by the selection criteria. This paper presents an application of TOPSIS method based on fuzzy sets (fuzzy TOPSIS), which is one of the broader multicriteria decision making means, used to select an appropriate site for mineral processing plant for Sangan iron ore mine (phase 2). For this purpose, at first considering the geological, technical, economical, and environmental factors, three feasible alternatives were selected for the processing plant using Geographical Information System. Then, based on the technical and experimental experiences and through judgment of the decision makers and experts, 14 criteria were established and these alternatives were evaluated. Finally, the alternatives were ranked and the best location was recommended.     

Backcasting long-term climate data: evaluation of hypothesis

Most often than not, incomplete datasets or short-term recorded data in vast regions impedes reliable climate and water studies. Various methods, such as simple correlation with stations having long-term time series, are practiced to infill or extend the period of observation at stations with missing or short-term data. In the current paper and for the first time, the hypothesis on the feasibility of extending the downscaling concept to backcast local observation records using large-scale atmospheric predictors is examined. Backcasting is coined here to contrast forecasting/projection; the former is implied to reconstruct in the past, while the latter represents projection in the future. To assess our hypotheses, daily and monthly statistical downscaling models were employed to reconstruct past precipitation data and lengthen the data period. Urmia and Tabriz synoptic stations, located in northwestern Iran, constituted two case study stations. SDSM and data-mining downscaling model (DMDM) daily as well as the group method of data handling (GMDH) and model tree (Mp5) monthly downscaling models were trained with National Center for Environmental Prediction (NCEP) data. After training, reconstructed precipitation data of the past was validated against observed data. Then, the data was fully extended to the 1948 to 2009 period corresponding to available NCEP data period. The results showed that DMDM performed superior in generation of monthly average precipitation compared with the SDSM, Mp5, and GMDH models, although none of the models could preserve the monthly variance. This overall confirms practical value of the proposed approach in extension of the past historic data, particularly for long-term climatological and water budget studies.     

Genesis of the Nasirabad manganese occurrence,Fars province,Iran: Geochemical evidences

The Nasirabad manganese occurrence is located to the south of the Neyriz in the Fars province. Structurally and lithologically, this occurrence lies in the southwest part of the Zagros Thrust Belt and was deposited as Mn-nodules and interconnected ore-bearing interlayer's with radiolarite cherts in the vicinity of the Neyriz ophiolites. The present work deals with the geology and geochemistry of the Nasirabad manganese occurrence with a discussion of its genesis. High Mn/Fe (average 18.85) and high Ba (average 28,830 ppm) with low Pb (2.0 ppm) and LREE > HREE, La_n/Nd_n (average 4.5), Dy_n/Yb_n (average 1.2) and negative Eu anomaly suggest distal hydrothermal source. The Co/Zn (average 2.2), Ce/La ratio (average 0.67) and trace element discrimination diagrams indicate hydrothermal–hydrogenous processes. Y/Ho ratio (average 24.85) and strong positive correlation coefficient between major oxides and some high field strength elements (HFSE) like; TiO₂ vs Fe₂O₃ (r = 0.98), Al₂O₃ vs Zr (r = 0.97), Al₂O₃ vs Fe₂O₃ (r = 0.98), Zr vs K₂O (r = 0.98), Nb vs TiO₂ (r = 0.92), Th vs Fe₂O₃ (r = 0.76), Th vs MgO (r = 0.86) reveal the presence of volcaniclastics and (or) terrigenous detritals of mafic composition being deposited into the depositional basin. It seems that intermittent interlayering of mafic detrital material derived from volcanic eruption of the Neyriz island arc directly affected the physicochemical conditions of hydrothermal ore precipitation in this basin and consequently the Nasirabad manganese ores represent hydrothermal–hydrogenous geochemical characteristics. The Nasirabad is an example of non-sulphidic, oxic Mn-mineralization. Similar trend between the enrichment and depletion of some bioessential elements (e.g., Mn, As, Ba, Sr, Co, Ce) might have been resulted from selective sequestering of metal ions by microbial processes and hence hydrogenous characteristics may also be the result of biogenetic processes. Moreover the high dilution of distal hydrothermal exhalations by sea water cannot be ruled out.