Behavioral of sediment transport at lowland and mountainous rivers: a special reference to selected Malaysian rivers

Mountain rivers and lowland rivers differ in many ways. Some of the many elements that distinguish both river systems apart are the rivers’ geomorphological appearances, hydraulic geometry, pollution transport, sediment transport, and its own roughness and coarseness. In this particular study, the element of sediment transport is given distinctive attention too. This study employs the deterministic approach for bed load prediction entailing the use of the parameterization concept where particle size and flow variation is taken into full consideration. Apart from that, the classical approach of Shields number is also used to determine the transport rates at the fluvial system. However, due to some limitation and range of applicability, the Shields number approach was re-modified to suit the range of applicability. Changes were made to the alleviating critical stress term and formulating exponential approach. For this research, it was important to deduce the underlying principles which are universal and common to all river systems, due to obvious and distinct differences between the mountain and lowland rivers. A special attribute was given to the Malaysian natural rivers because of the limited recorded data available. All datasets were compiled and tested with the bed load predictors to observe the commonality pattern between the lowland and mountain river systems. Most of the bed load transport equations limit the range of applicability by isolating the flow regime or bed roughness individually. Thus, it was vital for researchers to find the commonality pattern between these two river systems which needed to be statistically sound in its form. It was postulated that the particle densimetric Froude number is graphically and statistically fit for both river systems. Hence, this predictor is used as it has a high potential to be included in the sediment transport parameterization for Malaysian natural rivers.     

High and low temperature alteration of uranium and thorium minerals, Um Ara granites, south Eastern Desert, Egypt

The Um Ara area, in the south Eastern Desert of Egypt contains a number of uranium occurrences related to granitic rocks. U-rich thorite, thorite and zircon are the main primary uranium- and thorium-bearing minerals found in mineralized zones of the Um Ara alkali-feldspar granites; uranophane is the most common secondary uranium mineral. U-rich thorite contains blebs of galena, has rims of uranophane and contains inclusions of Zr-rich thorite. Electron probe microanalysis (EPMA) provides an indication of a range of solid solution between thorite and zircon, in which intermediate phases, such as Th-rich zircon and Zr-rich thorite, were formed. These phases have higher sum of all cations per formula (2.05 to 2.06 apfu, for 4 oxygen atoms) than that of ideal thorite and zircon. This is attributed to the presence of substantial amount of interstitial cations such as Ca, U and Al in these phases. Some zircon grains are stoichiometric in composition, other altered grains display lower SiO₂ and ZrO₂ contents. Enrichment of Th and U in altered zircon preferentially involves coupled substitution (Ca²⁺ + (Th,U)⁴⁺ ↔ 2Zr⁴⁺ + 2Si⁴⁺), implying that significant U and Th may enter the Zr and Si position in zircon. Negative correlation of Zr vs. Hf and Al may indicate that Hf and Al have been introduced to the zircon during later fluid alteration rather than during the primary magmatic event. A two-stage metallogenetic model is proposed for the alteration processes and origin of U- and Th-bearing minerals in the Um Ara alkali-feldspar granite: 1) the first stage was dominated by hydrothermal alteration and accompanied by albitization, k-feldspathization, desilicification, chloritization, hematitization, silicification, argillization, fluoritization and corrosion of primary U-bearing minerals. Solid-solution between thorite and zircon occurred during this stage. The second stage occurred at the near-surface profile where circulating meteoric water played an important role in mobilizing the early formed primary U-bearing minerals. Uranium was likely transported as a calcium uranyl carbonate complexes. When these complexes lost their stabilities by precipitation of calcite, they decomposed in the presence of silica to form uranophane.     

The GEF/UNDP/IMO Malacca Straits Demonstration Project: Sources of Pollution

The Straits of Malacca is subjected to a great variety of environmental stresses due to its strategic location as a major international shipping lane and the concentration of agriculture, industry and urbanisation which predominate on the west coast of Peninsular Malaysia. This paper gives an overview of the study conducted in the Malacca Straits as part of the GEF/UNDP/IMO Regional Programme on the Prevention and Management of Marine Pollution in the East Asian Seas, in particular pertaining to the identification of land and sea-based sources of pollution in Malaysia which contributes to the pollution load in the Straits, as well as the assessment of the relative contribution of each source.     

Integration of remote sensing data with the field and laboratory investigation for lithological mapping of granitic phases: Kadabora pluton, Eastern Desert, Egypt

In the current study, an integration of Enhanced Thematic Mapper Plus (ETM+), field, and laboratory data have been used for lithological mapping of different granitic phases in the Kadabora area, Eastern Desert, Egypt. Application of enhancement techniques, including a new proposed band ratio combination (ratio 5/3, 3/1, 7/5 in RGB, respectively) and supervised classification images are used in discriminating different granitic phases in the Kadabora pluton from each other and from their environs. The data have been proved with the help of field and geochemical investigations. The results revealed that: (1) the Kadabora granitic pluton could be distinguished into three phases that recognized by field and laboratory investigation including granodiorite (phase I), monzogranite (phase II), and syeno-alkali feldspar granite (phase III). These phases are arranged according to their relative ages while the country rocks include ophiolitic mélange and metagabbro–diorite complex. It is also confirmed that the granitic pluton is invaded by dyke swarms which is trending in N–S direction. Geochemically, results show that the granodiorite is calc-alkaline, I-type and formed under subduction tectonic regime. Monzogranite falls within the alkaline and highly fractionated calc-alkaline granites, whereas syeno-alkali feldspar granite extends into proper alkaline granitoids field. Monzogranite and syeno-alkali feldspar granite belong to the A₂-subtype granite. This A₂-subtype granite was probably formed in an extensional regime, subsequent to subduction which can lead to tensional break-up of the crust (i.e., post-collisional, post-orogenic granites). The monzogranite and the syeno-alkali feldspar granite were probably formed by partial melting of relatively anhydrous lower crust source and/or tonalite to granodiorite is viable alternative to the granulite source.     

Temperature and precipitation trend analysis of the Iraq Region under SRES scenarios during the twenty-first century

Theoretical and Applied Climatology - Iraq is classified as the fifth most vulnerable country in the world to decreased water and food availability, extreme temperatures, and associated health...     

Group velocity dispersion analysis in northern Peninsular Malaysia

The crustal structure beneath three seismic stations over Malaysia has been investigated with the application of the group velocity dispersion analysis of the northern Sumatra earthquake data which occurred on 06 April 2010. Eighteen crustal layer models are constructed to assess the structure. Group velocity dispersions have been computed for the recorded earthquake data using a graphical method and modified Haskell matrix method for the models. Both dispersions have been presented for the interpretation of crustal layers. Findings have shown four major crustal layers having thicknesses of 2.5–4.0, 2.0–5.5, 5.0–8.0, and 8.5–9.0 km, while in Terengganu, it has shown three layers. Density, shear, and compressional wave velocities used in models have suggested that the crustal structure of the northern part of Peninsular Malaysia is crystalline. Major crustal minerals are of quartz, plagioclase, and mica. Most layers seem to have upward directions toward Perak from Kedah and Terengganu.     

Tectono-sedimentary evolution of active extensional basins controlling the deposition of the Middle Miocene Kareem Formation,southwestern Gulf of Suez,Egypt

The Naozhi Au–Cu deposit is located on the continental margin of Northeast China, forming part of the West Pacific porphyry–epithermal gold–copper metallogenic belt. In this paper, we systematically analyzed the compositions, homogenization temperatures, and salinity of fluid inclusions as well as their noble gas isotopic and Pb isotopic compositions from the deposit. These new data show that (1) five types of fluid inclusions were identified as pure gas inclusions (V-type), pure liquid inclusions (L-type), gas–liquid two-phase inclusions (W-type, as the main fluid inclusions (FIs)), CO₂-bearing inclusions (C-type), and daughter-mineral-bearing polyphase inclusions (S-type); (2) W-type FIs in quartz crystals of early, main, and late stage are homogenized at temperatures of 324.7–406.7, 230–338.8, and 154.6–308 °C, with salinities of 2.40–7.01 wt% NaCl_eq, 1.73–9.47 wt% NaCl_eq, and 6.29 wt% NaCl_eq, respectively. S-type FIs in quartz crystals of early stage are homogenized at temperatures of 328.6–400 °C, with salinities of 39.96–46.00 wt% NaCl_eq; (3) Raman analysis results reveal that the vapor compositions of early ore-forming fluids consisted of CO₂ and H₂O, with H₂O gradually increasing and CO₂ being absent at the late mineralization stage; (4) fluid inclusions in pyrite and chalcopyrite have ³He/⁴He ratios of 0.03–0.104 Ra, ²⁰Ne/²²Ne ratios of 9.817–9.960, and ⁴⁰Ar/³⁶Ar ratios of 324–349. These results indicate that the percentage of radiogenic ⁴⁰Ar* in fluid inclusions varies from 8.8 to 15.5 %, containing 84.5–91.2 % atmospheric ⁴⁰Ar; (5) the ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, and ²⁰⁶Pb/²⁰⁴Pb ratios of sulfides are 18.1822–18.3979, 15.5215–15.5998, and 38.1313–38.3786, respectively. These data combined with stable isotope data and the chronology of diagenesis and metallogenesis enable us suppose that the ore-forming fluids originated from the melting of the lower crust, caused by the subduction of an oceanic slab, whereas the mineralized fluids were exsolved from the late crystallization stage and subsequently contaminated by crustal materials/fluids during ascent, including meteoric water, and the mineral precipitation occurred at a shallow crustal level.

     

Simulating time-histories and pseudo-spectral accelerations from the 1992 Cairo earthquake at the proposed El-Fayoum New City Site,Egypt

El-Fayoum New City represents one of the new urban settlements that are recently erected all over Egypt. Because seismic recordings are not available, I used the stochastic method to simulate the largest damaging earthquake from the closest seismic source to the proposed area of the city. To verify the method and its computed results in Egypt, a study termed “method verification” was performed. I found that the October 12, 1992, earthquake (M _b = 5.8) that occurred southwest of Cairo in the vicinity of the Dahshour region, at the coordinates 29.77°N, 31.07°E, is a significant earthquake to the city. The parameters of the path from the hypocenter of the event to the city were taken into consideration. To determine the site parameters, a shallow seismic refraction survey was carried out in the studied area. Accordingly, I simulated time-histories and pseudo-spectral accelerations from the October 12, 1992, earthquake at the location of seismic profiles. Finally, it is demonstrated that the site is characterized by high ground motion amplification factors, producing a high ground motion acceleration value.     

Prediction of temperature variation within a snowpack in open areas and under different canopy covers

Snow temperature is a major component of many physical processes in a snowpack. The temperature and the change in temperature across a layer have a dominant effect on physical properties of snow grains as well as its hardness, strength, and failure resistance. In this study, temperature and snow cover thickness were measured during the snow season of 2007–2008 in 11 elevation classes and in three different sampling locations, one in an open area and two under different forest canopy covers for each class along Kartalkaya road, Bolu. Each sampling site was visited 44 times to collect data including snow depth, snow surface temperature, ground temperature, and temperature within snowpack at 20‐cm intervals. Seven different models are developed to determine snowpack temperature variations under forest canopy covers and in an open area with different leaf area index values. All models were performed using a multilayer perceptron (MP) method for the Bolu–Kartalkaya area, Turkey. MP approach constitutes a standard form of neural network modeling and can modify two‐layer linear perceptron methods using three and more layers. The ability of MP is to handle complex nonlinear interactions, which ease the natural process of modeling. This method can overcome complex computations using neuron networks, and they can easily nonlinearly link input and output variables. The predictive errors are determined on the basis of mean absolute error and mean square error criteria. The Nash–Sutcliffe sufficiency score showing compliance between observed and predicted values is also calculated. According to the mean absolute error, the mean square error, and the Nash–Sutcliffe sufficiency score criteria, the predictive errors are within reasonable error intervals, justifying the use of the developed MP models for engineering applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Tracer-based estimation of temporal variation of water sources: an insight from supra- and subglacial environments

ABSTRACT

The temporal variations in electrical conductivity and the stable isotopes of water, δD and δ¹⁸O, were examined at Chhota Shigri Glacier, India, to understand water sources and flow paths to discharge. Discharge is highly influenced by supraglacially derived meltwater during peak ablation, and subglacial meltwaters are more prominent at the end of the melt season. The slope of the best fit linear regression line for δD versus δ¹⁸O, for both supraglacial and runoff water, is lower than that for precipitation (snow and rain) and surface ice, indicating strong isotopic fractionation associated with the melting processes. The slope of the local meteoric water line (LMWL) is close to that of the global meteoric water line (GMWL), reflecting that the moisture source is predominantly oceanic. The d-excess variation in rainwater confirms that the southwest monsoon is the main contributor during summer while the remainder including winter is mostly influenced by westerlies.