Transient and Transition Factors in Modeling Permafrost Thaw and Groundwater Flow

Permafrost covers approximately 24% of the Northern Hemisphere, and much of it is degrading, which causes infrastructure failures and ecosystem transitions. Understanding groundwater and heat flow processes in permafrost environments is challenging due to spatially and temporarily varying hydraulic connections between water above and below the near-surface discontinuous frozen zone. To characterize the transitional period of permafrost degradation, a three-dimensional model of a permafrost plateau that includes the supra-permafrost zone and surrounding wetlands was developed. The model is based on the Scotty Creek basin in the Northwest Territories, Canada. FEFLOW groundwater flow and heat transport modeling software is used in conjunction with the piFreeze plug-in, to account for phase changes between ice and water. The Simultaneous Heat and Water (SHAW) flow model is used to calculate ground temperatures and surface water balance, which are then used as FEFLOW boundary conditions. As simulating actual permafrost evolution would require hundreds of years of climate variations over an evolving landscape, whose geomorphic features are unknown, methodologies for developing permafrost initial conditions for transient simulations were investigated. It was found that a model initialized with a transient spin-up methodology, that includes an unfrozen layer between the permafrost table and ground surface, yields better results than with steady-state permafrost initial conditions. This study also demonstrates the critical role that variations in land surface and permafrost table microtopography, along with talik development, play in permafrost degradation. Modeling permafrost dynamics will allow for the testing of remedial measures to stabilize permafrost in high value infrastructure environments.     

A Dual Delineation Approach to Untangle Interferences in Well Doublets Systems

Traditional numerical methods for the delineation of wellhead protection areas span deterministic and probabilistic approaches. They provide time-related capture zones. However, none of the existing approaches identifies the groundwater contribution areas related to each source or sink. In this work, the worthiness of the so-called double delineation approach was extended. This task was achieved by simple postprocessing of its dual outputs leading to a highly efficient screening tool. In the particular context of geothermal resources management through the well doublets of the Dogger aquifer in the Paris Basin (France), the approach was extended to forecast the compositional heat breakthrough at production wells. Hence, cold-water breakthrough and temperature decline in production wells are timely assessed in low-enthalpy geothermal reservoirs. The method quantifies how groundwater volumes are moving through space and time between any couple of source and sink. It provides unprecedented tools advancing the enhanced understanding of water resources systems functioning. It is highly recommended to implement the presented concepts in the current and future generations of community groundwater models.     

The effect of seafloor topography in the Southern Ocean on tabular iceberg drifting and grounding

Antarctic tabular icebergs are important active components in the ice sheet-ice shelf-ocean system. Seafloor topography is the key factor that affects the drifting and grounding of icebergs, but it has not been fully investigated. This study analyzes the impact of seafloor topography on the drifting and grounding of Antarctic tabular icebergs using Bedmap-2 datasets and iceberg route tracking data from Brigham Young University. The results highlight the following points. (1) The quantitative distributions of iceberg grounding events and the tracking points of grounded icebergs are mainly affected by iceberg draft and reach their peak values in sea water with depths between 200 m and 300 m. The peak tracking point number and linear velocity of free-drifting icebergs are found in the Antarctic Slope Front (water depth of approximately 500 m). (2) The area of possible grounding regions of small-scale icebergs calved from ice shelf fronts accounts for 28% of the sea area at water depths less than 2000 m outside the Antarctic coastline periphery (3.62 million km²). Their spatial distribution is mainly around East Antarctica and the Antarctic Peninsula. The area of possible grounding regions of large tabular icebergs with long axes larger than 18.5 km (in water depths of less than 800 m) accounts for 74% of the sea area. (3) The iceberg drifting velocity is positively correlated with ocean depth in areas where the depth is less than 2000 m (R=0.85, P<0.01). This result confirms the effect of water depth variations induced by seafloor topography fluctuations on iceberg drifting velocity.     

Spatial distribution and contamination assessment of heavy metals in surface soils of Hassi Messaoud, Algeria

An increase in heavy metal pollution in the soils of Hassi Messaoud (Algeria) due to intense industrialization and urbanization has become a serious environmental problem. There are three large industrial complexes that have been established in the region of Hassi Messaoud for petroleum extraction field and refinery. The region hosts several industrial facilities which are the main sources for hazardous wastes. Surface soil samples from 58 sampling sites (systematically sampled; 1 × 1 km regular grid), including different functional areas in Hassi Messaoud, were collected and analyzed. The results showed that the average concentrations of Cu, Ni, Mn, Pb and Zn in soil of Hassi Messaoud were up to 13.17, 35.78, 121.21, 130.97 and 61.08 mg/kg, respectively. Ni concentrations were comparable to background values, while Cu, Mn, Pb and Zn concentrations were higher than their corresponding background values. Among the functional areas, the industrial regions displayed the highest metal concentrations, while the lowest concentrations occurred in rural soil. Principal component analysis coupled with cluster analysis showed that: (1) Pb and Zn had anthropogenic sources; and (2) Ni, Cu and Mn were associated with parent materials. Contaminations in soils were classified as geoaccumulation index and enrichment factor. Pollution index values of Cu, Ni, Mn, Pb and Zn varied in the range of 0.04–5.41, 0.46–2.49, 0.01–5.73, 0.62–152.9 and 0.09–53.01, with mean values of 1.32, 1.08, 1.26, 5.64 and 3.1, respectively. The integrated pollution index (IPI) of all the analyzed samples varied from 0.42 to 31.59, with a mean of 2.48, and more than 5.45 % of samples are extremely contaminated; 18.18 % are heavily contaminated; 60 % are moderately contaminated; and others are low contaminated. The spatial distribution of IPI showed that desert and rural areas displayed relatively lower heavy metal contamination in comparison with other areas.     

Optimization of slope angle and its seismic stability: A case study for the proposed open pit coalmine in Phulbari, NW Bangladesh

The present study reflects upon the results of substantial program of two-dimensional Finite Element Method （FEM） numerical analyses of the open pit that links to slope angle optimization associated with the safety factor of the pit slope of a coal mine in Bangladesh. In the present analyses, two types of models have been presented. The first model estimates safety factor without seismic effect on the overall pit slope of the model; the second model incorporates safety factor with seismic stability of the model. The calculated optimum slope angle of the first model is 31% with a rational safety factor of 1.51, prior to the seismic effect. However, the value is reduced to 0.93, 0.82, and 0.72, after we applies the seismic effect in the second model with M6, M6.5, and M7, respectively. Finally, our modeling results emphasize that for the case of the proposed Phulbari coalmine, there is extremely high prospect for causing massive slope failure along the optimum pit slope angle with 31% if the mine area felt seismic shaking, like the Sikkim （in northern India） earthquake with M6.9 on September 18, 2011.     

Hydrocarbon pollution of the Mediterranean coastline of Morocco

Organic geochemical study of hydrocarbon pollution of the Mediterranean coastline of Morocco (Tangier-Nador) was performed during March–April 2002. It corresponds to a preliminary work representing an initial assessment of oil contamination of Moroccan coast.Three coastal sites corresponding to Tangier, Tetouan and Nador, representing the main built-up area of this marine region, were selected for superficial sediments, water and organism sampling. Results showed high contamination levels in these three selected sites, known as the most exposed areas to urban and industrial discharges. The maximal contamination corresponding to the sum of non-aromatic (NAH) and polycyclic aromatic hydrocarbons (PAH) encountered in sediment samples was about 553 μg/g (dw). Nevertheless, even a small city agglomeration without any industrial activity showed high values reaching 370 μg/g (dw), which confirm the important hydrocarbons input coming from discharges of fishing ships and oil transporting tankers.The obtained results from this survey reflecting in part the important amounts drained via effluents toward the Moroccan Mediterranean coasts, presented to the concerned authorities drove to the realization of the project of treatment of the wastewater.They later expect to lower rates by 50%, which is still insufficient for a fragile ecosystem such as the Mediterranean and sensitive to anthropogenic effects.     

An isolation system for limited seismic gaps in near‐fault zones

The ability of a recently proposed seismic isolation system, with inherent self‐stopping mechanism, to mitigate or even eliminate seismic pounding of adjacent structures is investigated under severe near‐fault earthquakes. The isolation system is referred to as roll‐in‐cage (RNC) isolator. It is a rolling‐based isolator that provides in one unit the necessary functions of vertical rigid support, horizontal flexibility with enhanced stability, hysteretic energy dissipation, and resistance to minor vibration loads. In addition, the RNC isolator is distinguished by a self‐stopping (buffer) mechanism to limit the bearing displacement under excitations stronger than a design earthquake or at limited seismic gaps, and a linear gravity‐based self‐recentering mechanism to prevent permanent bearing displacement without causing vertical fluctuation of the isolated structure. A previously developed multifeature SAP2000 model of the RNC isolator is improved in this paper to account for the inherent buffer mechanism's damping. Then, the effectiveness of the isolator's buffer mechanism in limiting peak bearing displacements is studied together with its possibly arising negative influence on the isolation efficiency. After that, the study investigates how to alleviate or even eliminate those possibly arising drawbacks, due to the developed RNC isolator's inner pounding as a result of its buffer activation, to achieve efficient seismic isolation with no direct structure‐to‐structure pounding, considering limited seismic gaps with adjacent structures and near‐fault earthquakes. The results show that the RNC isolator could be an efficient solution for aseismic design in near‐fault zones considering limited seismic gaps. Earthquake Engineering and Structural Dynamics. Copyright © 2014 John Wiley & Sons, Ltd.     

Delineating of groundwater potential zones based on remote sensing,GIS and analytical hierarchical process: a case of Waddai,eastern Chad

GeoJournal - The delineation of favourable areas of water potentials and their management must be based on rigorous scientific studies. Thus, geographic information system (GIS) and remote sensing...     

Extraction and analysis of geological lineaments by combining ASTER-GDEM and Landsat 8 image data in the central high atlas of Morocco

Natural Hazards - The present work focuses on using remote sensing techniques and geographical information system (GIS) to automatically extract lineaments in the southeast of Morocco, which is one...