Relationships between magnetic susceptibility and heavy metals in urban topsoils in the arid region of Isfahan, central Iran

Electromagnetic induction (EMI) method results are shown for vertical magnetic dipole (VMD) configuration by using the EM38 equipment. Performance in the location of metallic pipes and electrical cables is compared as a function of instrumental drift correction by linear and quadratic adjusting under controlled conditions. Metallic pipes and electrical cables are buried at the IAG/USP shallow geophysical test site in São Paulo City, Brazil. Results show that apparent electrical conductivity and magnetic susceptibility data were affected by ambient temperature variation. In order to obtain better contrast between background and metallic targets it was necessary to correct the drift. This correction was accomplished by using linear and quadratic relation between conductivity/susceptibility and temperature intending comparative studies. The correction of temperature drift by using a quadratic relation was effective, showing that all metallic targets were located as well deeper targets were also improved.     

An exploratory study on the use of enzyme activities as sediment tracers: biochemical fingerprints?

Little information exists on the potential of soil enzyme activities,which are sensitive to soil properties and management,for the characterization of sediment sources at the catchment scale.The objective of this study is to explore and evaluate enzyme activity as tracer for sediment fingerprinting in the Hiv catchment(55 km~2),Iran.Therefore,four enzymes were measured from 42 different sampling sites,covering three sediment source areas(rangeland/surface erosion,orchard/surface erosion,and streambank erosion),as well as from 12 sediment samples from reservoir check dams (sediment sinks).The results indicate that,based upon backward mode discriminant analysis,βglucosidase and dehydrogenase,allowed more than 95%of the samples to be correctly assigned to their source areas.These enzymes were selected as input data for a mixing-model to determine the relative contribution of the sampled sediment sources.The mean contributions from rangeland, orchard and streambank sources in the study area were estimated as 11.3%,15.1%and 73.7%, respectively.Using geochemical tracers,the mean contribution from rangeland,orchard and streambank sources was estimated as 14.1%,9.5%and 74.8%,respectively.Combined biochemical and geochemical tracers,similar values were obtained(18.7%,10.7%and 70.7%,respectively).Our results indicate that soil enzyme activity allows for a good characterization of sediment sources,and can provide a complementary tool to currently existing sediment fingerprinting approaches.However, the method should be also tested in other regions.     

Vulnerability of ordinary moment resistant concrete frames

The effects of structural modeling (bar slip in lap splice), ground motion selection process (epsilon effect) and size of a structure (number of bays and stories) on the fragility of reinforced concrete ordinary moment resisting frames are investigated. An analytical model is developed to account for bar slip in lap splice, which exhibits good correlation with existing experimental data. Then, incremental dynamic analysis is used to derive the fragility curves for four model structures. The model structures simulate frames with a different number of bays and stories. Finally, the fragility curves are corrected for the epsilon effect. The results show that slip in the lap splice can significantly increase the failure probability, especially for the collapse prevention limit state. At the same time, it is found that spectral shape has a significant impact on the fragility curves. It is also found that accounting for or ignoring bar slip or epsilon effects increases the probability of failure for larger structures. This indicates an unconservative bias in the safety of larger structures.     

A comparative study of the ATC-40 recommended and numerically derived M-(ψ) relationship

Nonlinear static analysis procedures are key tools in evaluating the performance of existing buildings and verifying the design of seismic retrofits in seismically active regions.In this procedure,nonlinear force-displacement or moment-curvature (M-(4)) behavior needs to be defined.In the ATC-40 document,values of M-~ have been proposed to model elements in a nonlinear procedure.However,these values need to be investigated to determine if they are representative of actual values.In this paper,an attempt has been made to numerically derive M-（4） curves to simulate actual performance.Then,these curves are compared with the ATC-40 recommended curves with respect to various parameters.The study indicated that ATC-40 suggested values are conservative in nature in most situations.     

Adsorption of BTEX on Surfactant Modified Granulated Natural Zeolite Nanoparticles: Parameters Optimizing by Applying Taguchi Experimental Design Method

In this paper, a novel adsorbent developed by means of granulating of natural zeolite nanoparticles (i.e., clinoptilolite) was evaluated for possible removal of the petroleum monoaromatics (i.e., benzene, toluene, ethylbenzene, and xylene, BTEX). To do this, the natural zeolite was ground to produce nanosized particulate, then modified by two cationic surfactants and granulated. The effect of various parameters including temperature, initial pH of the solution, total dissolved solids (TDS), and concentration of a competitive substance (i.e., methyl tert‐butyl ether, MTBE) were studied and optimized using a Taguchi statistical approach. The results ascertained that initial pH of the solution was the most effective parameter. However, the low pH (acidic) was favorable for BTEX adsorption onto the developed adsorbents. In this study, the experimental parameters were optimized and the best adsorption condition by determination of effective factors was chosen. Based on the S/N ratio, the optimized conditions for BTEX removal were temperature of 40°C, initial pH of 3, TDS of 0 mg/L, and MTBE concentration of 100 µg/L. At the optimized conditions, the uptake of each BTEX compounds reached to more than 1.5 mg/g of adsorbents.     

Biofiltration of Hexane Vapor: Experimental and Neural Model Analysis

Biofiltration is a commonly practiced biological technique to remove volatile compounds from waste gas streams. From an industrial view‐point, biofilter (BF) operation should be flexible to handle temperatures and inlet load (IL) variations. A compost BF was operated at different temperatures (30–45°C) and at various inlet loading rates (ILR; 8–598 g m^?3 h^?1) under intermittent loading conditions. Complete removal of n‐hexane was observed at 30 and 35°C at ILRs up to 330 g m^?3 h^?1. Besides, 20–75% of the pollutant was removed at 40°C, corresponding to the different ILs applied to the BF. Increasing the temperature to 45°C decreased the removal efficiency (RE) significantly. A feed forward neural network was used to predict the RE of BF with temperature and ILR as the input variables. The experimental data was divided into training (2/3) and test datasets (1/3). The best structure of neural network was obtained by trial and error on the basis of the least differences between predicted and experimental values, as ascertained from their coefficient of regression (R²) values. The modeling results showed that a multilayer network with the topology 2?10?1 was able to predict BF performance effectively with R²‐value of 0.995 for the test data. The results from this study showed the predicting capability of ANNs which can be considered as an alternative for conventional knowledge‐based models.     

Modification of MCM‐41 with Anionic Surfactant: A Convenient Design for Efficient Removal of Cationic Dyes from Wastewater

The potential of MCM‐41 for the removal of cationic dyes from water solution was evaluated using sodium dodecyl sulfate (SDS) for the surface modification of this mesoporous material. Admicelle structures formed on the surface of the calcined MCM‐41 are capable of removing organic pollutants and cationic species from water environment. The structural, textural, and surface chemical characteristics of the prepared SDS‐modified MCM‐41 (SDS‐MCM‐41) were studied. The adsorption capacity of SDS‐MCM‐41 was evaluated for methylene blue (MB) as a target cationic dye. Equilibrium adsorption isotherm data were manipulated employing nonlinear regression analysis. The Langmuir, Freundlich, and Sips isotherm models were examined. The adsorption data were well fitted to both Langmuir and Sips isotherm models. The maximum adsorption capacity of SDS‐MCM‐41 for MB, based on Langmuir and Sips models, were 290.8 and 297.3 mg g^?1, respectively. Ethanol was found to be an effective solvent for partial regeneration of the adsorbent.     

Left-lateral active deformation along the Mosha–North Tehran fault system (Iran): Morphotectonics and paleoseismological investigations

The Mosha and North Tehran faults correspond to the nearest seismic sources for the northern part of the Tehran megacity. The present-day structural relationships and the kinematics of these two faults, especially at their junction in Lavasanat region, is still a matter of debate. In this paper, we present the results of a morphotectonic analysis (aerial photos and field investigations) within the central part of the Mosha and eastern part of the North Tehran faults between the Mosha valley and Tehran City. Our investigations show that, generally, the traces of activity do not follow the older traces corresponding to previous long-term dip–slip thrusting movements. The recent faulting mainly occurs on new traces trending E–W to ENE–WSW affecting Quaternary features (streams, ridges, risers, and young glacial markers) and cutting straight through the topography. Often defining en-echelon patterns (right- and left-stepping), these new traces correspond to steep faults with either north- or south-dipping directions, along which clear evidences for left-lateral strike–slip motion are found. At their junction zone, the two sinistral faults display a left-stepping en-echelon pattern defining a positive flower structure system clearly visible near Ira village. Further west, the left-lateral strike–slip motion is transferred along the ENE–WSW trending Niavaran fault and other faults. The cumulative offsets associated with this left-lateral deformation is small compared with the topography associated with the previous Late Tertiary thrusting motion, showing that it corresponds to a recent change of kinematics.     

Analytical solutions for the capture zone of a pumping well near a stream

The capture zone for a fully penetrating well in an aquifer with regional flow to a stream boundary under steady-state conditions was delineated using complex algebra and image well theory. Regional flow in the aquifer was allowed to take different directions relative to the stream axis. Two critical pumping rates, Q _C1 and Q _C2, produce three capture-zone pattern scenarios: (1) at low pumping rates (Q?<?Q _C1) water is solely withdrawn from the aquifer and no water from the stream enters the aquifer, (2) at medium pumping rates (Q _C1?<?Q?<?Q _C2) a portion of stream water enters the aquifer but it is not captured by the well, and (3) at high pumping rates (Q?>?Q _C2) pumped water is supplied from both the aquifer and the stream with different proportions. For the second and third scenarios, the stream length interval through which stream water enters the aquifer was determined and found to be more sensitive to pumping rate as the regional flow direction approaches the stream axis. The portion of pumped water supplied by the stream was determined in the third scenario. Finally, the capture-zone asymmetry with respect to its axial line was delineated.     

Interrelationship of TOC,As, Fe,Mn, Al and Si in shallow alluvial aquifers in Chapai-Nawabganj,Northwestern Bangladesh: implication for potential source of organic carbon

Two boreholes and ten piezometers in the Ganges flood plain were drilled and installed for collecting As-rich sediments and groundwater. Groundwater samples from the Ganges flood plain were collected for the analysis of cations (Ca²⁺, Mg²⁺, K⁺, Na⁺), anions (Cl⁻, NO₃ ⁻, SO₄ ²⁻), total organic carbon (TOC), and trace elements (As, Mn, Fe, Sr, Se, Ni, Co, Cu, Mo, Sb, Pb). X-ray powder diffraction was performed to characterize the major mineral contents of aquifer sediments and X-ray fluorescence (XRF) to analyze the major chemical composition of alluvial sediments. Results of XRF analysis clearly show that fine-grained sediments contain higher amounts of trace element because of their high surface area for adsorption. Relative fluorescence index (15–38 QSU) of humic substance in groundwater was measured using spectrofluorometer, the results revealed that groundwater in the Ganges flood plain contains less organic matter (OM). Arsenic concentration in water ranges from 2.8 to 170 μg/L (mean 50 μg/L) in the Ganges flood plain. Arsenic content in sediments ranges from 2.1 to 14 mg/kg (mean 4.58 mg/kg) in the flood plains. TOC ranges from 0.49 to 3.53 g/kg (mean 1.64 g/kg) in the Ganges flood plain. Arsenic is positively correlated with TOC (R ² = 0.55) in sediments of this plain. Humic substances were extracted from the sediments from the Ganges flood plain. Fourier transform infrared analysis of the sediments revealed that the plain contains less humic substances. The source of organic carbon was assigned from δ¹³C values obtained using elemental analysis-isotope ratio mass spectrometry (EA-IRMS); the values (−10 to −29.44‰) strongly support the hypothesis that the OM of the Ganges flood plain is of terrestrial origin.