Agricultural land partitioning model based on irrigation efficiency using a multi‐objective artificial bee colony algorithm

In the process of agricultural land consolidation, the land parcels are optimally redesigned and rearranged in such a way that the dimensions of the resulting parcels are proportional to agricultural criteria such as irrigation discharge, soil texture, and cropping pattern. Besides these criteria, spatial factors like slope, road accessibility, volume of earthwork, and geometrical factors such as size and shape of parcels are also included in the design process of agricultural land partitioning. In this study, a land partitioning model was proposed using a multi‐objective artificial bee colony algorithm (MOABC‐LP) taking into consideration the mentioned factors. Initially, a feasible dimension range of parcels in a block was calculated based on irrigation efficiency. Two partitioning layouts were defined according to the topography and geometry of blocks. The proposed method was applied to a real study area and the results suggest that the land partitioning plan obtained by the MOABC‐LP model, in comparison with a designer's plan, not only makes the shape and size of parcels more compatible with the topographical and agricultural conditions of each block, but also reduces their cut‐and‐fill ratio.     

Inverse modelling for freshwater lens in small islands: Kish Island,Persian Gulf

A number of challenges including instability, nonconvergence, nonuniqueness, nonoptimality, and lack of a general guideline for inverse modelling have limited the application of automatic calibration by generic inversion codes in solving the saltwater intrusion problem in real‐world cases. A systematic parameter selection procedure for the selection of a small number of independent parameters is applied to a real case of saltwater intrusion in a small island aquifer system in the semiarid region of the Persian Gulf. The methodology aims at reducing parameter nonuniqueness and uncertainty and the time spent on inverse modelling computations. Subsequent to the automatic calibration of the numerical model, uncertainty is analysed by constrained nonlinear optimization of the inverse model. The results define the percentage of uncertainty in the parameter estimation that will maintain the model inside a user‐defined neighbourhood of the best possible calibrated model. Sensitivity maps of both pressure and concentration for the small island aquifer system are also developed. These sensitivity maps indicate higher sensitivity of pressure to model parameters compared with concentration. These sensitivity maps serve as a benchmark for correlation analysis and also assist in the selection of observations points of pressure and concentration in the calibration process. Copyright © 2012 John Wiley & Sons, Ltd.     

Holocene and Pleistocene pluvial periods in Yemen,southern Arabia

Arabia is an important potential pathway for the dispersal of Homo sapiens (“out of Africa”). Yet, because of its arid to hyper-arid climate humans could only migrate across southern Arabia during pluvial periods when environmental conditions were favorable. However, knowledge on the timing of Arabian pluvial periods prior to the Holocene is mainly based on a single and possibly incomplete speleothem record from Hoti Cave in Northern Oman. Additional terrestrial records from the Arabian Peninsula are needed to confirm the Hoti Cave record. Here we present a new speleothem record from Mukalla Cave in southern Yemen. The Mukalla Cave and Hoti Cave records clearly reveal that speleothems growth occurred solely during peak interglacial periods, corresponding to Marine Isotope Stages (MIS) 1 (early to mid-Holocene), 5.1, 5.3, 5.5 (Eemian), 7.1, 7.5 and 9. Of these humid periods, highest precipitation occurred during MIS 5.5 and lowest during early to middle Holocene.     

A new closed‐form solution for analysis of unlined pressure tunnels under seepage forces

In this study, a simplified analytical closed‐form solution, considering plane strain and axial symmetry conditions, for analysis of a circular pressure tunnel excavated underwater table, is developed. The method accounts for the seepage forces with the steady‐state flow and is based on the generalized effective stress law. To examine the effect of pore pressure variations and also the boundary conditions at the ground surface, the formulations are derived for different directions around the tunnel. The proposed method can be applied for analysis and design of pressure tunnels. Illustrative examples are given to demonstrate the performance of the proposed solution and also to examine the effect of seepage forces on the stability of tunnels. The simplified analytical solution derived in this study is compared with numerical analyses. It is concluded that the classic solutions (Lame's thick‐walled solution), considering the internal pressure as a mechanical load applied to the tunnel surface, are not applicable to pervious media and can result in an unsafe design. Copyright © 2012 John Wiley & Sons, Ltd.     

Three‐dimensional finite element study of arching behavior in slope/drilled shafts system

Two‐dimensional slope stability analysis for a slope with a row of drilled shafts needs a mechanism to take into account the three‐dimensional effect of the soil arching due to the spaced drilled shafts on slope. To gain a better understanding of the arching mechanisms in a slope with evenly spaced drilled shafts socketed into a stable stratum (or a rock layer), the three‐dimensional finite element modelling technique was used for a comprehensive parametric study, where the nonlinear and plastic nature of the soil and the elastic behavior of the drilled shafts as well as the interface frictions were modelled. Various factors were varied in the parametric study to include (1) the rigidity of the drilled shafts as influenced by its diameter, modulus of elasticity, and total length; (2) shafts spacing and location on the slope; (3) the material properties of rock and the socket length of shaft; and (4) the soil movement and strength parameters. Evidences of soil arching and reduction in the stresses and displacements through the load transfer mechanisms due to the presence of the drilled shafts were elucidated through the finite element method (FEM) simulation results. Design charts based on regression analysis of FEM simulation results were created to obtain a numerical value of the load transfer factor for the arching mechanism provided by the drilled shafts on the slope. Observations of the arching behavior learned from the FEM simulations provide an insight into the behavior of drilled shafts stabilized slope. Copyright © 2009 John Wiley & Sons, Ltd.     

A Unified Computational Method for Simulating Dynamic Behavior of Planing Vessels

High speed planing hulls have complex hydrodynamic behaviors. The trim angle and drafts are very sensitive to speed and location of the center of gravity. Therefore, motion simulation for such vessels needs a strong coupling between rigid body motions and hydrodynamic analysis. In addition, free surface should be predicted with good accuracy for each time step. In this paper, velocity and pressure fields are coupled by use of the fractional step method. On the basis of integration of the two-phase viscous f...     

Towards simulation of 3D nonlinear high-speed vessels motion

A numerical simulation algorithm based on the finite volume discretisation is presented for analyzing ship motions. The algorithm employs a fractional step method to deal with the coupling between the pressure and velocity fields. The free surface capturing is fulfilled by using a volume of fluid method in which the interface between the liquid (water) and gas (air) phases are computed by solving a scalar transport equation for the volume fraction of the liquid phase. The computed velocity field is employed to evaluate the acting forces and moments on the vessel. Using the strategy of boundary-fitted body-attached mesh and calculating all six degrees-of-freedom of motion in each time step, time history of ship motions including displacements, velocities and accelerations are evaluated.To verify the proposed algorithm, a series of verification tests are conducted. First, a two-dimensional asymmetrical wedge slamming is simulated as a simple type of a common case for high-speed vessels. Then, the steady-state forward motion of a high-speed planing catamaran is investigated. Results of both test cases show good agreement with experimental data. It is concluded that the proposed algorithm can be a promising strategy for both performance prediction and design of high-speed vessels.     

Modeling the near-field effects of the worst-case tsunami in the Makran subduction zone

As a first step towards the development of inundation maps for the northwestern Indian Ocean, we simulated the near-field inundation of two large tsunami in the Makran subduction zone (MSZ). The tsunami scenarios were based on large historical earthquakes in the region. The first scenario included the rupture of about 500 km of the plate boundary in the eastern MSZ, featuring a moment magnitude of M_w 8.6. The second scenario involved the full rupture of the plate boundary resulting from a M_w 9 earthquake. For each scenario, the distribution of tsunami wave height along the coastlines of the region is presented. Also, detailed runup modeling was performed at four main coastal cities in the region for the second scenario. To investigate the possible effect of splay fault branching on tsunami wave height, a hypothetical splay fault was modeled which showed that it can locally increase the maximum wave height by a factor of 2. Our results showed that the two tsunami scenarios produce a runup height of 12-18 m and 24-30 m, respectively. For the second scenario, the modeled inundation distance was between 1 and 5 km.     

Population ecology of fiddler crab, Uca lactea annulipes (Decapoda: Ocypodidae) in Sirik mangrove estuary,Iran

Fiddler crabs are known as the most conspicuous bioturbating animals in mangrove forest, which by their burrowing activities promote nutrient cycling in ecosystems. Mangroves, crabs and bacteria are connected in the form of positive feedback loop, whereby an increase in the activity of any participant will tend to increase the activity of all others as well. Population structure, growth, mortality, recruitment, biomass and production of fiddler crabs as dominant species of deposit-feeder crabs have been investigated from May 2005 to March 2006 in the Sirik mangrove estuary in the eastern part of Strait of Hormuz. Ten 1 m² squares of the substrate were randomly sampled during low tide. There was a significant change in organic content in the sampling area during study period. The sex ratio was significantly deviated from 1:1 ratio in large sizes, where males were dominated year around. Fiddler crabs showed seasonal growth pattern during a year, which the maximum growth was observed during autumn and early summer and ceased during winter by low temperature. Growth parameters were estimated by Appeldoorn's method and fitted with seasonalized von Bertalanffy growth models. The Kimura likelihood ratio test revealed significant differences in the overall growth curves between males and females, originated from the differences in k$k$ and L_∞$L_{\mathrm{\infty }}$ between sexes. Males were found to exhibit higher growth rate and larger size than females, this could be attributed to the higher investment of energy for reproduction in females. Reproduction was restricted to spring and early summer, while recruitment occurs at the end of summer. Total annual production of males and females was 37.90 and 10.05 g dry weight/10 m² respectively and major production took place during early summer. Because of impact of temperature on the activity of fiddler crabs in subtropical regions, density of crabs has significant positive correlation with temperature (P < 0.01), while growth rate shows significant negative correlation with organic matter of sediment (P < 0.05). In conclusion these crabs showed lower mortality and production rate with the seasonal growth and recruitment in comparison with tropical species.     

Assessing the effect of temporal dynamics on urban growth simulation: Towards an asynchronous cellular automata

Time is a fundamental dimension in urban dynamics, but the effect of various definitions of time on urban growth models has rarely been evaluated. In urban growth models such as cellular automata (CA), time has typically been defined as a sequence of discrete time steps. However, most urban growth processes such as land‐use changes are asynchronous. The aim of this study is to examine the effect of various temporal dynamics scenarios on urban growth simulation, in terms of urban land‐use planning, and to introduce an asynchronous parcel‐based cellular automata (AParCA) model. In this study, eight different scenarios were generated to investigate the impact of temporal dynamics on CA‐based urban growth models, and their outputs were evaluated using various urban planning indicators. The obtained results show that different degrees of temporal dynamics lead to various patterns appearing in urban growth CA models, and the application of asynchronous (event‐driven) CA models achieves better simulation results than synchronous models.