Facies Analysis and Sequence Stratigraphy of Silurian Carbonate Ramps in the Turan (Kopeh-Dagh) and Central Iran Plates with Emphasis on Gondwana Tectonic Event

Two sections from the Silurian deposits in the Central Iran Micro and Turan Plates were measured and sampled. These deposits are mostly composed of submarine volcanic rocks, skeletal and non-skeletal limestone, shale and sandstone that were deposited in low to high energy conditions (from tidal flat to deep open marine). According to gradual deepening trend, wide lateral distribution of facies as well as absence of resedimentation deposits, a depositional model of a homoclinal ramp was proposed for these deposits. Field observations and facies distribution indicate that, two depositional sequences were recognized in both sections. These sections show similarities in facies and depositional sequence during the Early Silurian in the area. Although there are some opinions and evidences that demonstrated Paleo-Tethys rifting phase started at the Late Ordovician-Early Silurian, similarities suggest that the Turan and Iran Plates were not completely detached tectonic block during this time, and that their depositional conditions were affected by global sea level changes and tectonic events.     

Joint Simulation of Grade and Rock Type in a Stratabound Copper Deposit

This work deals with the joint simulation of copper grade (as a continuous regionalized variable) and rock type (as a categorical variable) in Lince–Estefanía deposit, located in northern Chile. The region under study is heterogeneous, containing three main rock types (intrusive, andesite and breccia bodies) with different copper grade distributions. To perform joint simulation, the multi-Gaussian and pluriGaussian models are used in a combined form. To this end, three auxiliary Gaussian random fields are considered, one for simulating copper grade, up to a monotonic transformation, and two for simulating rock types according to a given truncation rule. Furthermore, the dependence between copper grade and rock types is reproduced by considering cross correlations between these Gaussian random fields. To investigate the benefits of the joint simulation algorithm, copper grade and rock types are also simulated by the traditional cascade approach and the results are compared. It is shown that the cascade approach produces hard boundaries, that is, abrupt transitions of copper grades when crossing rock-type boundaries, a condition that does not exist in the study area according to the contact analysis held on the available data. In contrast, the joint simulation approach produces gradual transitions of the copper grade near the rock-type boundaries and is more suited to the actual data.     

Earth pressure distribution behind rigid non-yielding walls under the effect of repeated loading on backfill

One of the most important factors in optimized design of non-yielding retaining walls like basement walls and bridge abutments is to determine the exact variation of earth pressure acting on such walls. In this paper, the distribution of at rest earth pressure behind a laboratory model of a fixed and rigid retaining wall with a cohesionless dry backfill is measured under the effect of static and repeated loads. The same conditions of the experimental model are then simulated numerically with a two-dimensional finite-difference analysis computer code. For the purpose of model verification, the results of numerical model are compared to the results of the experimental model, which is similar in geometrical and geomechanical properties. Cyclic surcharges with different amplitudes and frequencies are applied in different distances from the wall, and the earth pressure distribution, the resultant force, and its point of application are investigated. The effect of soil and loading parameters on the at rest earth pressure is also evaluated, and a parametric study has been carried out. The results of model show a significant increase in the earth pressure due to cyclic loading compared to static loading, especially in the initial cycles of loading. It indicates that the effect of cycling nature of loading should be essentially taken into account in the design of retaining walls.     

Effects of climate change on wind energy production in Iran

Arabian Journal of Geosciences - This study explores the effect of future climate change on wind energy conversion in Iran, based on data from existing wind farms. In an effort to estimate and...     

Surface deformation caused by April 6th 2009 earthquake in L’Aquila (Italy): A comparative analysis from ENVISAT ASAR,ALOS PALSAR and ASTER

Surface deformations in L’Aquila (centre of Italy) caused by the April 6th, 2009 earthquake were studied from space geodesy and remote sensing points of view using Synthetic Aperture Radar Interferometry (InSAR) and Sub-pixel Correlation Technique (SCT). InSAR was used to measure ground surface deformation in the satellite line of sight (LOS) direction and the deformation was determined using two separate interferometric pairs of ENVISAT ASAR and ALOS PALSAR data sets. Furthermore, SCT was employed to investigate the horizontal displacements in the area. Two separate pairs of ENVISAT ASAR and ASTER optical image data sets were employed, and horizontal displacements in Range/Azimuth and in west–east/south–north directions were investigated, respectively.     

Selective Separation/Preconcentration of Silver Ion in Water by Multiwalled Carbon Nanotubes Microcolumn as a Sorbent

The present paper proposes the application of multiwalled carbon nanotubes (MWCNTs) as a solid adsorbent for selective separation/preconcentration of silver(I) in water samples prior to flame atomic absorption spectrometry. The procedure is based on the solid phase extraction of Ag(I)–2‐mercaptobenzothiazole chelate on MWCNTs. The elution step is carried out with 5 mL of 2 mol L^?1 HNO₃ in acetone solution at a flow rate of 1.0 mL min^?1. The influences of the various analytical parameters including pH of the solution, eluent type, sample volume, flow rates of eluent, matrix ions were investigated for optimization of the presented procedure. Tests of addition/recovery for analyte ion in real samples were performed with satisfactory results. Preconcentration factor and limit of detection for Ag(I) were 160 and 0.21 µg L^?1, respectively. The synthesized MWCNT exhibited excellent stability in eluent solution and its adsorption capacity was 5.4 mg of silver per gram of sorbent. The proposed method was successfully applied to trace silver determination in a variety of environmental water samples.     

Smoothing impact of isostatic crustal thickness models on local integral inversion of satellite gravity gradiometry data

The effects of topographic masses on satellite gradiometric data are large and in order to reduce the magnitude of these effects some compensation mechanisms should be considered. Here we use the isostatic hypotheses of Airy-Heiskanen and the recent Vening Meinesz-Moritz for compensating these effects and to smooth the data prior to their downward continuation to gravity anomaly. The second-order partial derivatives of extended Stokes’ formula are used for the continuations over a topographically rough territory like Persia. The inversions are performed and compared based on two schemes of the remove-compute-restore technique and direct downward continuation. Numerical results show that the topographic-isostatic effect based on Vening Meinesz-Mortiz’s hypothesis smoothes the data better than that based on Airy-Heiskanen’s hypothesis. Also the quality of inversions of the smoothed data by this mechanism is twice better than that of the nonsmoothed ones.     

The Kharapeh orogenic gold deposit: geological,structural, and geochemical controls on epizonal ore formation in West Azerbaijan Province,Northwestern Iran

The Kharapeh gold deposit is located along the northwestern margin of the Sanandaj–Sirjan Zone (SSZ) in the West Azerbaijan province, Iran. It is an epizonal orogenic gold deposit formed within the deformed zone between central Iran and the Arabian plate during the Cretaceous–Tertiary Zagros orogeny. The deposit area is underlain by Cretaceous schist and marble, as well as altered andesite and dacite dikes. Structural analysis indicates that the rocks underwent tight to isoclinal recumbent folding and were subsequently co-axially refolded to upright open folds during a second deformation. Late- to post-tectonic Cenozoic granites and granodiorites occur northeast of the deposit area. Mineralization mainly is recognized within NW-trending extensional structures as veins and breccia zones. Normal faults, intermediate dikes, and quartz veins, oriented subparallel to the axial surface of the Kharapeh antiform, indicate synchronous extension perpendicular to the fold axis during the second folding event. The gold-bearing quartz veins are >1 km in length and average about 6 m in width; breccia zones are 10–50 m in length and ≤1 m in width. Hydrothermal alteration mainly consists of silicification, sulfidation, chloritization, sericitization, and carbonatization. Paragenetic relationships indicate three distinct stages—replacement and silicification, brecciation and fracture filling, and cataclastic brecciation—with the latter two being gold-rich. Fluid inclusion data suggest mineral deposition at temperatures of at least 220–255°C and depths of at least 1.4–1.8 km, from a H₂O–CO₂±CH₄ fluid of relatively high salinity (12–14 wt.% NaCl equiv.), which may reflect metamorphism of passive margin carbonate sequences. Ore fluid δ¹⁸O values between about 7‰ and 9‰ suggest no significant meteoric water input, despite gold deposition in a relatively shallow epizonal environment. Similarities to other deposits in the SSZ suggest that the deposit formed as part of a diachronous gold event during the middle to late Tertiary throughout the SSZ and during the final stages of the Zagros orogeny. The proximity of Kharapeh to the main tectonic suture of the orogen, well-developed regional fold systems with superimposed complex fracture geometries, and recognition of nearby volcanogenic massive sulfide systems that suggest a region characterized by sulfur- and metal-rich crustal rocks, collectively indicate an area of the SSZ with high favorability for undiscovered gold resources.     

Palaeoecology and biostratigraphy of early Cretaceous (Aptian) calcareous nannofossils and the δCcarb isotope record from NE Iran

Upper Barremian-Lower Aptian sediments of the Sarcheshmeh and Sanganeh formations in the Kopet Dagh area, northeast Iran were studied with regard to their calcareous nannofossil content and their δ¹³C_carb signal. The sediments are composed mainly of marlstones, argillaceous limestones and limestones. Based on the occurrence of biostratigraphic index taxa, the calcareous nannofossil zones NC5, NC6 and the NC7A Subzone were recognised. The calcareous nannofossils and the δ¹³C_carb data enable recognition of the early Aptian Oceanic Anoxic Event 1a (OAE 1a). The deposits of the OAE 1a interval are characterised by the rarity of nannoconids and a sharp negative δ¹³C_carb excursion (1.36‰), followed by an abrupt positive δ¹³C_carb excursion of 4-5‰; both events have been recognised elsewhere in OAE 1a deposits in the Tethys. In the OAE 1a interval, the relative abundance of Watznaueria barnesiae/Watznaueria fossacincta is higher (more than 40%) than that of Biscutum spp., Discorhabdus spp. and Zeugrhabdotus spp., which indicates dissolution. In the upper part of the section, the higher relative abundance of mesotrophic and oligotrophic taxa (Watznaueria spp. and nannoconids respectively) and the enhanced relative abundance of eutrophic taxa (Biscutum spp., Discorhabdus spp., Zeugrhabdotus spp.) is indicative of an environment with slightly increased nutrient content. The presence of warm water taxa (Rhagodiscus asper and nannoconids) and the absence of cool water taxa (Repagulum and Crucibiscutum) suggest warm surface-water conditions.