The Ganges and Brahmaputra rivers in Bangladesh: basin denudation and sedimentation

Every year the Ganges and Brahmaputra rivers in Bangladesh transport 316 and 721 million tonnes of sediment, respectively. These high loads of suspended sediment reflect the very high rate of denudation in their drainage basins. The average mechanical denudation rate for the Ganges and Brahmaputra basins together is 365 mm 10³ yr⁻¹. However, the rate is higher in the Brahmaputra Basin than that in the Ganges Basin. Several factors, including mean trunk channel gradient, relief ratio, runoff, basin lithology and recurring earthquakes are responsible for these high denudation rates. Of the total suspended sediment load (i.e. 1037 million tonnes) transported by these rivers, only 525 million tonnes (c. 51% of the total load) are delivered to the coastal area of Bangladesh and the remaining 512 million tonnes are deposited within the lower basin, offsetting the subsidence. Of the deposited load, about 289 million tonnes (about 28% of the total load) are deposited on the floodplains of these rivers. The remaining 223 million tonnes (about 21% of the total load) are deposited within the river channels, resulting in aggradation of the channel bed at an average rate of about 3·9 cm yr⁻¹. Although the Brahmaputra transports a higher sediment load than the Ganges, the channel bed aggradation rate is much higher for the Ganges. This study also documents a wide range of interannual, seasonal and daily variation in suspended sediment transport and water discharge. Interannual variation in sediment deposition within the basin is also suggested. Copyright © 1999 John Wiley & Sons, Ltd.     

A spatio-temporal three-dimensional conceptualization and simulation of Dera Ismail Khan alluvial aquifer in visual MODFLOW: a case study from Pakistan

Dera Ismail Khan (DIK) is situated in the Lower Indus Basin of Pakistan. The land use has been changed in the canal command area due to irrigation activities near the Indus River. To check the current status and predict the groundwater levels in the area, the unconfined aquifer has been simulated in Visual MODFLOW for a period of 35 years, i.e., from 1985 to 2020. The 2900-km² area has been modeled with a grid of 500 by 500 m and the depth set to 100 m. The aquifer in the study area has been divided vertically and laterally into three and ten zones, respectively, for the characterization. Water wells and streams were used as the sinks and hydrologic boundaries, respectively. The model was successfully calibrated in steady and the non-steady state. The simulation revealed that the whole simulation can be divided into two phases, i.e., before and after the construction of the Chashma Right Bank Canal (CRBC), whereas the results were summarized in the form of water table depth maps and groundwater budget calculations. To determine the groundwater sustainability, a conjunctive use scenario has been employed to simulate the aquifer dynamics till 2020. The simulation revealed incremental drawdowns till the end.     

Analysis of pervasive precipitation in similar gradient areas of Iran

Precipitation is a major climatic element with high spatial variations. Temporal and spatial variations may differ in large and small scales. It is, therefore, of utmost importance to study areas with similar gradients in terms of precipitation patterns in order to shed light on the complexities of precipitation variations. In the present study, attempts were made to identify areas with similar gradients experiencing the same precipitation pattern over a 50-year period (1964–2013). To this end, data were collected from synoptic stations in Iran in two phases (i.e., 1434 stations in the first phase and 673 stations in the second one). Alexanderson’s technique was adopted to examine sudden changes in precipitation patterns. The results showed that five regions with similar gradients could be identified in terms of precipitation patterns: negative and high variations, negative and moderate variations, positive and high variations, positive and moderate variations, and little or no variations. The distribution of such regions indicated that the regions with positive trends experienced more annual variations and had further spatial distribution. Furthermore, the findings revealed that the regions with negative precipitation patterns experienced more sudden changes in comparison with those with positive precipitation patterns. Additionally, more variations were observed in the precipitation patterns in recent years.     

Crustal structure of Northwest Zagros (Kermanshah) and Central Iran (Yazd and Isfahan) using teleseismic Ps converted phases

Receiver functions are widely employed to detect P-to-S converted waves and are especially useful to image seismic discontinuities in the crust. In this study we used the P receiver function technique to investigate the velocity structure of the crust beneath the Northwest Zagros and Central Iran and map out the lateral variation of the Moho boundary within this area. Our dataset includes teleseismic data (M _b ≥ 5.5, epicentral distance from 30° to 95°) recorded at 12 three-component short-period stations of Kermanshah, Isfahan and Yazd telemetry seismic networks. Our results obtained from P receiver functions indicate clear Ps conversions at the Moho boundary. The Moho depths were firstly estimated from the delay time of the Moho converted phase relative to the direct P wave beneath each network. Then, we used the P receiver function inversion to find the properties of the Moho discontinuity such as depth and velocity contrast. Our results obtained from PRF are in good agreement with those obtained from the P receiver function modeling. We found an average Moho depth of about 42 km beneath the Northwest Zagros increasing toward the Sanandaj-Sirjan Metamorphic Zone and reaches 51 km, where two crusts (Zagros and Central Iran) are assumed to be superposed. The Moho depth decreases toward the Urmieh-Dokhtar Cenozoic volcanic belt and reaches 43 km beneath this area. We found a relatively flat Moho beneath the Central Iran where, the average crustal thickness is about 42 km. Our P receiver function modeling revealed a shear wave velocity of 3.6 km/s in the crust of Northwest Zagros and Central Iran increasing to 4.5 km/s beneath the Moho boundary. The average shear wave velocity in the crust of UDMA as SSZ is 3.6 km/s, which reaches to 4.0 km/s while in SSZ increases to 4.3 km/s beneath the Moho.     

On Inflow to a Tunnel in a Fractured Double-Porosity Aquifer

Inflow to a tunnel is a great public concern and is closely related to groundwater hydrology, geotechnical engineering, and mining engineering, among other disciplines. Rapid computation of inflow to a tunnel provides a timely means for quickly assessing the inflow discharge, thus is critical for safe operation of tunnels. Dewatering of tunnels is another engineering practice that should be planned. In this study, an analytical solution of the inflow to a tunnel in a fractured unconfined aquifer is obtained. The solution takes into account either the spherical or slab-shaped matrix block and the unsteady state interporosity flow. The instantaneous drainage water table and anisotropic hydraulic conductivities of the fractures network are also considered. Both uniform flux and uniform head boundary condition are considered to simulate the constant head boundary condition in the tunnel. The effects of the hydraulic parameters of the fractured aquifer on the inflow variation of the tunnel are explored. The application of the presented solution to obtain the optimum location and discharge of the well to minimize the inflow to a tunnel is illustrated.     

Shigar valley gemstones,their chemical composition and origin,Skardu, Gilgit-Baltistan,Pakistan

A variety of gemstones is being mined in the Shigar valley, Skardu, Pakistan. These include beryl (goshenite and aquamarine), tourmaline (schorl), garnet (almandine–spessartine), apatite, topaz, fluorite, zoisite, clinozoisite, and axinite, mostly occurring in complex or zoned pegmatites and metamorphic rocks. These have been analyzed using electron probe micro-analyzer and X-ray diffractometer. The mineral chemistry of each gemstone is similar to its respective typical gemstone variety with homogenous chemical composition. Field and chemical characteristics suggest that beryl, tourmaline, garnet, apatite, topaz, and fluorite are occurring in zoned pegmatites which are largely formed by magmatic hydrothermal fluids in the cavities and vugs within the intermediate zone. However, zoisite, clinozoisite, and axinite may have a metamorphic and/or metasomatic origin.     

Geochemical Characteristics,Origin, and Evolution of Ore‐Forming Fluids of the Khut Copper Skarn Deposit,West of Yazd in Central Iran

The Khut copper skarn deposit is located at about 50 km northwest of Taft City in Yazd province in the middle part of the Urumieh‐Dokhtar magmatic arc. Intrusion of granitoid of Oligocene–Miocene age into carbonate rocks of the Triassic Nayband Formation led to the formation of marble and a calcic skarn. The marble contains high grade Cu mineralization that occurs mainly as open space filling and replacement. Cu‐rich sulfide samples from the mineralized marble are also anomalous in Au, Zn, and Pb. In contrast, the calcic skarn is only weakly anomalous in Cu and W. The calcic skarn is divided into garnet skarn and garnet–pyroxene skarn zones. Paragenetic relationships and microthermometric data from fluid inclusions in garnet and calcite indicate that the compositional evolution of skarn minerals occurred in three main stages as follows. (i) The early prograde stage, which is characterized by Mg‐rich hedenbergite (Hd_53.7Di_42.3–Hd_86.1Di_9.5) with Al‐bearing andradite (69.8–99.5 mol% andradite). The temperature in the early prograde skarn varies from 400 to 500°C at 500 bar. (ii) The late prograde stage is manifested by almost pure andradite (96.2–98.4 mol% andradite). Based on the fluid inclusion data from garnet, fluid temperature and salinity in this stage is estimated to vary from 267 to 361°C and from 10.1 to 21.1 wt% NaCl equivalent, respectively. Pyrrhotite precipitation started during this stage. (iii) The retrograde stage occurs in an exoskarn, which consists of an assemblage of ferro‐actinolite, quartz, calcite, epidote, chlorite, sphalerite, pyrite, and chalcopyrite that partially replaces earlier mineral assemblages under hydrostatic conditions during fracturing of the early skarn. Fluids in calcite yielded lower temperatures (T < 260°C) and fluid salinity declined to ～8 wt% NaCl equivalent. The last stage mineralization in the deposit is supergene weathering/alteration represented by the formation of iron hydroxide, Cu‐carbonate, clay minerals, and calcite. Sulfur isotope data of chalcopyrite (δ³⁴S of +1.4 to +5.2‰) show an igneous sulfur source. Mineralogy and mineral compositions of the prograde assemblage of the Khut skarn are consistent with deposition under intermediately oxidized and slightly lower fS₂ conditions at shallow crustal levels compared with those of other typical Fe‐bearing Cu–Au skarn systems.