Hydrological response characteristics of Mediterranean catchments at different time scales: a meta-analysis

ABSTRACT

This work examines 140 hydrological studies conducted in the Mediterranean region. It identifies key characteristics of the hydrological responses of Mediterranean catchments at various time scales and compares different methods and modelling approaches used for individual-catchment studies. The study area is divided into the northwestern (NWM), eastern (EM) and southern (SM) Mediterranean. The analysis indicates regional discrepancies in which the NWM shows the most extreme rainfall regime. A tendency for reduced water resources driven by both anthropogenic and climatic pressures and a more extreme rainfall regime are also noticeable. Catchments show very heterogeneous responses over time and space, resulting in limitations in hydrological modelling and large uncertainties in predictions. However, few models have been developed to address these issues. Additional studies are necessary to improve the knowledge of Mediterranean hydrological features and to account for regional specificities.

Editor D. Koutsoyiannis Associate editor A. Efstratiadis     

The 21 May 2003 Tsunami in the Western Mediterranean Sea: Statistical and Wavelet Analyses

We report the statistical and wavelet analyses of the 21 May 2003 tsunami produced by an M _w 6.8–6.9 thrust earthquake in the western Mediterranean Sea using 19 tide gauge records. The largest trough-to-crest wave height was 196 cm recorded at the Sant Antoni station in the lee of the incoming tsunami wave. Except at one station, the first wave was not the largest wave at all the analyzed stations, and the largest wave arrived several hours after the first arrival. In addition, the tsunami waves persisted for more than 1 day at most stations. As the spectra of coastal tide gauge stations are strongly influenced by topographic features, special care was taken here while interpreting the results of spectral and wavelet analysis. Our wavelet analysis shows that only a peak at around 23 min is persistent for long duration, and other peaks at 14, 30, 45, and 60 min appeared at short durations. The 23-min signal is possibly associated with the width of the source fault whereas the fault length contributed to the 45-min signal. Based on these dominant periods, the tsunami source dimensions are estimated as 95 km × 45 km. The statistical and wavelet analyses performed here provide some new insights into the characteristics of the tsunami that was generated and propagated in the western Mediterranean basin.     

Isolation and characterization of alkane degrading bacteria from petroleum reservoir waste water in Iran (Kerman and Tehran provenances)

Petroleum products spill and leakage have become two major environmental challenges in Iran. Sampling was performed in the petroleum reservoir waste water of Tehran and Kerman Provinces of Iran. Alkane degrading bacteria were isolated by enrichment in a Bushnel–Hass medium, with hexadecane as sole source of carbon and energy. The isolated strains were identified by amplification of 16S rDNA gene and sequencing. Specific primers were used for identification of alkane hydroxylase gene. Fifteen alkane degrading bacteria were isolated and 8 strains were selected as powerful degradative bacteria. These 8 strains relate to Rhodococcus jostii, Stenotrophomonas maltophilia, Achromobacter piechaudii, Tsukamurella tyrosinosolvens, Pseudomonas fluorescens, Rhodococcus erythropolis, Stenotrophomonas maltophilia, Pseudomonas aeruginosa genera. The optimum concentration of hexadecane that allowed high growth was 2.5%. Gas chromatography results show that all strains can degrade approximately half of hexadecane in one week of incubation. All of the strains have alkane hydroxylase gene which are important for biodegradation. As a result, this study indicates that there is a high diversity of degradative bacteria in petroleum reservoir waste water in Iran.     

Selection of a Landfill Site for Solid Waste Management: An Application of AHP and Spatial Analyst Tool

Selection of a suitable landfill site for Solid Waste Management (SWM) forms an important component of urban planning. The problem of SWM has assumed significant proportion for the municipal authorities in the wake of rapid industrialization, urbanization and resultant pressure on existing resources. Many criteria such as distance from residential locations, transport connectivity, presence of water-bodies (drains, ponds, rivers etc.) and forests, ground water table and geology are taken into consideration while planning for suitable sites. Spatial Analyst Tool along with Analytic Hierarchy Process (AHP) model is extremely useful in such multicriteria decision making process. The present study, based on these tools/techniques, endeavours to identify a suitable location for landfill site in a part of the National Capital Territory of Delhi. The study identifies six potential sites out of which one has been proposed and recommended as the best suitable site.     

Evaluating evapotranspiration using data mining instead of physical-based model in remote sensing

Theoretical and Applied Climatology - Precise calculations for determining the water requirements of plants and the extent of evapotranspiration are crucial in determining the volume of water...     

Spatiotemporal changes in precipitation concentration over Iran during 1962–2019

Climatic Change - Changes in precipitation pattern can lead to widespread impacts across natural and human systems. This study assesses precipitation variability as well as anthropogenic and...     

Probabilistic Analysis of Ground Surface Vibration Due to Train Movement, a Case Study on Tehran Metro Line 4

Ground surface vibration produced by moving train is one of the most important aspects in urban areas. The purpose of this study is the probabilistic analysis of ground surface vibration, which is generated by metro transportations. For this reason, Tehran metro line 4 is considered as a case study. In this paper, at first, a new procedure is used to simulate train dynamic load. In the second step, based on the variation of geomechanical properties and train characteristics in Tehran metro line 4, more than 60 numerical models are simulated. The results of numerical simulations are analyzed by multivariate statistical technique and an equation for prediction of peak particle velocity (PPV) in the ground surface is presented. In the next step, probabilistic analysis is done using Monte Carlo Simulation (MCS). Finally, sensitivity of input data on ground surface vibration is discussed and the impact of geomechanical properties and train characteristics on the surface vibration is considered. Based on the probabilistic analysis, PPV in the surface region of Tehran metro line 4 is <2.76?mm/s with 95?% probability.     

Gold Deposits in the Sanandaj–Sirjan Zone: Orogenic Gold Deposits or Intrusion‐Related Gold Systems?

Most of the known large gold deposits in Iran are located along the Sanandaj–Sirjan Zone, western Iran, which hosts a wide range of gold deposit types. Gold deposits in the belt, hosted in upper Paleozoic to upper Mesozoic volcano‐sedimentary sequences of lower greenschist to lower amphibolite metamorphic grade, appear to represent mainly orogenic and intrusion‐related gold deposit types. The largest resource occurs at Muteh, with smaller deposits/occurrences at Zartorosht, Qolqoleh, Kervian, Qabaqloujeh, Kharapeh, and Astaneh. Although a major part of the gold deposits in the Sanandaj–Sirjan Zone are related to metamorphic devolatilization, some deposits including Muteh and Astaneh are related to short‐lived disruptions in an extensional tectonic regime and are associated with magma generation and emplacement. The age of gold ore formation in the orogenic gold deposits is Late Cretaceous to Tertiary, reflecting peak‐metamorphism during regional Cretaceous–Paleocene convergence and compression. The Oligocene to Pliocene age of most intrusion‐related gold systems is consistent with the young structural setting of the gold ore bodies; these deposits are sequestered along normal faults, correlated with Middle to Late Tertiary extensional tectonic events. This relationship is comparable to the magmatic‐metallogenetic evolution of the Urumieh‐Dokhtar magmatic arc, where the number of different types of gold‐copper deposits and the magnitude of the larger ones followed development of a magmatic arc. The appropriate explanation may be related to two different stages of gold mineralization consisting of a first compressional phase during the Late Cretaceous to Early‐Middle Tertiary, which is related to orogenic gold mineralization in the Qolqoleh, Kervian, Qabaqloujeh, Kharapeh, and Zartorosht deposits, and the extensional phase during the Eocene to Pliocene that is recognized by young intrusion‐related gold mineralization in the Muteh and Astaneh deposits.     

Signature of the upper mantle density structure in the refined gravity data

The gravitational signal of the upper mantle density structures is investigated in the refined gravity data which are corrected for the gravitational contributions of the crust density structures and the Moho geometry. The gravimetric forward modeling is applied to compute these refined gravity data globally on a 1 × 1 arcdeg grid using the global geopotential model (EGM2008), the global topographic/bathymetric model (DTM2006.0) including the ice-thickness data, and the global crustal model (CRUST2.0). The characteristics of the upper mantle density structures are further analyzed in association with the Moho parameters (i.e., Moho depths and density contrast). The 1 × 1 arcdeg global data of the Moho parameters are estimated by applying the combined least-squares approach based on solving Moritz’s generalization of the Vening–Meinesz inverse problem of isostasy. The refined gravity data exhibit mainly the mantle lithosphere structures attributed to the global mantle convection. A significant correlation found over oceans between the refined gravity data and the Moho density contrast is explained by the increasing density of the oceanic lithosphere with age. Despite the lithosphere structures attributed to the global mantle convection are confirmed also in the refined gravity data over continents, the significant correlation between the refined gravity data and the Moho parameters is in this case absent. Instead, the significant proportion of lateral variations of the Moho density contrast within the continental lithosphere is attributed to the depth-dependant density changes due to pressure and thermal gradient.     

Assessment of soil liquefaction potential based on numerical method- a case study of an urban railway project

Paying special attention to geotechnical hazards such as liquefaction in huge civil projects like urban railways especially in susceptible regions to liquefaction is of great importance. A number of approaches to evaluate the potential for initiation of liquefaction, such as Seed and Idriss simplified method have been developed over the years. Although simplified methods are available in calculating the liquefaction potential of a soil deposit and shear stresses induced at any point in the ground due to earthquake loading, these methods cannot be applied to all earthquakes with the same accuracy, also they lack the potential to predict the pore pressure developed in the soil. Therefore, it is necessary to carry out a ground response analysis to obtain pore pressures and shear stresses in the soil due to earthquake loading. Using soil historical, geological and compositional criteria, a zone of the corridor of Tabriz urban railway line 2 susceptible to liquefaction was recognized. Then, using numerical analysis and cyclic stress method using QUAKE/W finite element code, soil liquefaction potential in susceptible zone was evaluated based on design earthquake.