Assessment of soil liquefaction potential based on numerical method- a case study of an urban railway project

Paying special attention to geotechnical hazards such as liquefaction in huge civil projects like urban railways especially in susceptible regions to liquefaction is of great importance. A number of approaches to evaluate the potential for initiation of liquefaction, such as Seed and Idriss simplified method have been developed over the years. Although simplified methods are available in calculating the liquefaction potential of a soil deposit and shear stresses induced at any point in the ground due to earthquake loading, these methods cannot be applied to all earthquakes with the same accuracy, also they lack the potential to predict the pore pressure developed in the soil. Therefore, it is necessary to carry out a ground response analysis to obtain pore pressures and shear stresses in the soil due to earthquake loading. Using soil historical, geological and compositional criteria, a zone of the corridor of Tabriz urban railway line 2 susceptible to liquefaction was recognized. Then, using numerical analysis and cyclic stress method using QUAKE/W finite element code, soil liquefaction potential in susceptible zone was evaluated based on design earthquake.     

Introducing a new conceptual instantaneous unit hydrograph model based on a hydraulic approach

ABSTRACT

A novel approach is introduced for simulation of instantaneous unit hydrographs (IUHs). The model consists of a series of linear reservoirs that are connected to each other, and is referred to as the inter-connected linear reservoir model (ICLRM). By assuming the flow between two reservoirs is a linear function of the difference between the water levels in the reservoirs, a system of first-order linear differential equations is obtained as the ICLRM governing equation. By solving the equations, the discharge from the last reservoir is considered as an IUH. A small-scale laboratory device was constructed for the simulation of IUHs using the model. By studying four hydrographs extracted from the literature, and simulating them using both the ICLRM and the Nash model, it is concluded that the ICLRM can predict these hydrographs more accurately than the Nash model. Due to the simplicity of the construction and operation of the ICLRM and, more importantly, its visual aspect, the ICLRM may be considered as an effective educational tool for studying IUHs.     

Drained cavity expansions in soils of finite radial extent subjected to two boundary conditions

The problem of drained cavity expansion in soils of finite radial extent is investigated. Cylindrical and spherical cavities expanded from zero radius subjected to either constant stress or zero displacement at the finite boundary are considered. The generalised analytical solution procedure presented enables more advanced constitutive models to be implemented than have been possible in previous studies. Results generated for Sydney quartz sand highlight substantial differences between cavity limit pressures for the two boundary conditions and for boundaries of finite and infinite radial extent. This is of significance in accounting for boundary effects when interpreting cone penetration tests conducted in calibration chambers. Copyright © 2011 John Wiley & Sons, Ltd.     

Impact of lateral force-resisting system and design/construction practices on seismic performance and cost of tall buildings in Dubai, UAE

The local design and construction practices in the United Arab Emirates(UAE),together with Dubai’s unique rate of development,warrant special attention to the selection of Lateral Force-Resisting Systems(LFRS).This research proposes four different feasible solutions for the selection of the LFRS for tall buildings and quantifies the impact of these selections on seismic performance and cost.The systems considered are: Steel Special Moment-Resisting Frame(SMRF),Concrete SMRF,Steel Dual System(SMRF with Special Steel Plates Shear Wall,SPSW),and Concrete Dual System(SMRF with Special Concrete Shear Wall,SCSW).The LFRS selection is driven by seismic setup as well as the adopted design and construction practices in Dubai.It is found that the concrete design alternatives are consistently less expensive than their steel counterparts.The steel dual system is expected to have the least damage based on its relatively lesser interstory drifts.However,this preferred performance comes at a higher initial construction cost.Conversely,the steel SMRF system is expected to have the most damage and associated repair cost due to its excessive flexibility.The two concrete alternatives are expected to have relatively moderate damage and repair costs in addition to their lesser initial construction cost.     

Geochemical Aspects of Hypogene Hydrothermal Alteration Zones in the Chol‐qeshlaghi Area,NW Iran: Constrains on REEs

Chol-qeshlaghi altered area lies in the northwestern part of the post-collisional Urumieh-Dokhtar magmatic arc, NW Iran. Pervasive silicic, argillic, phyllic and propylitic altered zones appears to be intimately affiliated to the fluids derivative of upper Oligocene Khankandi granodiorite. This paper is dedicated to the identification of geochemical characteristics of hydrothermal alterations, focusing on the determination of the mass gains and losses of REEs, to gain significant insights regard...     

A Novel Multiple-Kernel Support Vector Regression Algorithm for Estimation of Water Quality Parameters

Natural Resources Research - The quality of surface waters plays a key role in the sustainability of ecological systems. Measuring water quality parameters (WQPs) is of high...     

Bidirectional behavior of unreinforced masonry walls

Most of the studies related to the modeling of masonry structures have by far investigated either the in‐plane (IP) or the out‐of‐plane (OP) behavior of walls. However, seismic loads mostly impose simultaneous IP and OP demands on load‐bearing or shear masonry walls. Thus, there is a need to reconsider design equations of unreinforced masonry walls by taking into account bidirectional effects. The intent of this study is to investigate the bidirectional behavior of an unreinforced masonry wall with a typical aspect ratio under different displacement‐controlled loading directions making use of finite element analysis. For this purpose, the numerical procedure is first validated against the results of the tests on walls with different failure modes conducted by the authors. Afterward, the response of the wall systems is evaluated with increasing top displacement having different orientations. A set of 19 monotonic and three cyclic loading analyses are performed, and the results are discussed in terms of the variation of failure modes and load–displacement diagrams. Moreover, the results of wall capacity in each loading condition are compared with those of the ASCE41‐06 formulations. The results indicate that the direction of the resultant force, vectorial summation of IP and OP forces, of the wall is initially proportional to the ratio of stiffness in the IP and the OP directions. However, with the increase of damage, the resultant force direction inclines towards the wall's longitudinal direction regardless of the direction of the imposed displacement. Finally, recommendations are made for applicability of ASCE41‐06 formulations under different bidirectional loading conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

Mixed precision parallel preconditioner and linear solver for compositional reservoir simulation

Reservoir simulation role in value creation and strategic management decisions cannot be over emphasized. Simulation of complex challenging reservoirs with millions of grid blocks especially in compositional mode is very time-consuming even with fast modern computers. On the other hand, high price of cluster supercomputers prevents them for being commonly used for fast simulation of such reservoirs. In recent years, the development of many-core processors like cell processors, DSPs, and graphical processing units (GPUs) has provided a very cost-effective hardware platform for fast computational operations. However, programming for such processors is much more difficult than conventional CPUs, and new parallel algorithm design and special parallel implementation methods are needed. Using the computational power of CPUs, GPUs, and/or any other processing unit, Open Computing Language (OpenCL) provides a framework for programming for heterogeneous platforms. In this paper, OpenCL is used to employ the computational power of a GPU to build a preconditioner and solve the linear system arising from compositional formulation of multiphase flow in porous media. The proposed parallel preconditioner is proved to be quite effective, even in heterogeneous porous media. Using data-parallel modules on GPU, the preconditioner/solver runtime reduced at least 1 order of magnitude compared to their serial implementation on CPU.     

Spatiotemporal changes in precipitation concentration over Iran during 1962–2019

Climatic Change - Changes in precipitation pattern can lead to widespread impacts across natural and human systems. This study assesses precipitation variability as well as anthropogenic and...