Geochemical Aspects of Hypogene Hydrothermal Alteration Zones in the Chol‐qeshlaghi Area,NW Iran: Constrains on REEs

Chol-qeshlaghi altered area lies in the northwestern part of the post-collisional Urumieh-Dokhtar magmatic arc, NW Iran. Pervasive silicic, argillic, phyllic and propylitic altered zones appears to be intimately affiliated to the fluids derivative of upper Oligocene Khankandi granodiorite. This paper is dedicated to the identification of geochemical characteristics of hydrothermal alterations, focusing on the determination of the mass gains and losses of REEs, to gain significant insights regard...     

Computing eddy-current response and current-channeling response of the spheroidal conductor for the separated receiver and transmitter systems

In this article the response of the induced eddy-current in an unlimited conduction spheroidal as well as the response of the current-channeling resulted from the presence of the spheroidal in a weakly conducted medium are derived. The common methods are based on receiving electromagnetic induction response from the homocentric and coaxial receiver and transmitter coils which are exactly over the anomaly. As the spheroidal location is unknown in the practice, it is suggested to measure the electromagnetic induction response in a case that the receiver and the transmitter have an arbitrary situation regarding to the anomaly. In this article, eddy-current response and current-channeling response of the spheroid have been computed in a more general case in which at least one axis of spheroid and the dipole axes of the receiver and transmitter coils are on the same plate; however, none of the coils are laid over the anomaly. Using this method, we can determine the location and the depth of the spheroid through fixing the transmitter’s position and of the receivers’ coil movements.     

Preliminary estimation of the tsunami hazards associated with the Makran subduction zone at the northwestern Indian Ocean

We present a preliminary estimation of tsunami hazard associated with the Makran subduction zone (MSZ) at the northwestern Indian Ocean. Makran is one of the two main tsunamigenic zones in the Indian Ocean, which has produced some tsunamis in the past. Northwestern Indian Ocean remains one of the least studied regions in the world in terms of tsunami hazard assessment. Hence, a scenario-based method is employed to provide an estimation of tsunami hazard in this region for the first time. The numerical modeling of tsunami is verified using historical observations of the 1945 Makran tsunami. Then, a number of tsunamis each resulting from a 1945-type earthquake (M _w 8.1) and spaced evenly along the MSZ are simulated. The results indicate that by moving a 1945-type earthquake along the MSZ, the southern coasts of Iran and Pakistan will experience the largest waves with heights of between 5 and 7 m, depending on the location of the source. The tsunami will reach a height of about 5 m and 2 m in northern coast of Oman and eastern coast of the United Arab Emirates, respectively.     

Genesis of Tertiary Magnetite–Apatite Deposits,Southeast of Zanjan,Iran

Magnetite–apatite deposits in the Alborz volcano–plutonic belt, southeast Zanjan, in Iran, have blade, lenzoid, and vein forms, which extend in an E‐W direction. There are many magnetite–apatite veins and veinlets in this region, and some of them are economically important, such as Zaker, Morvarid, Sorkheh–Dizaj, and Aliabad. The sizes of the vein orebodies vary between 2 and 16 m in width, 10–100 m in length, and 5–40 m in depth. Microscopic examination of thin sections and polishes indicate that they are composed of magnetite and apatite, with minor amounts of goethite, hematite, actinolite, quartz, muscovite–illite, talc, dolomite, and calcite. The geochemistry and mineralogy of the granitic host rock reveals that it is calc‐alkaline and I‐type. Field observations, mineral paragenesis, the composition of the orebodies, and the composition of the fluid inclusions in the apatite minerals with low salinity (less than 20 wt.% NaCl equivalent) indicate that these magnetite veins were hydrothermally generated at about 200–430°C and are not related to silica–iron oxide immiscibility, as are the major Precambrian magnetite deposits in central Iran.     

Prediction of Compressional, Shear, and Stoneley Wave Velocities from Conventional Well Log Data Using a Committee Machine with Intelligent Systems

Measurement of compressional, shear, and Stoneley wave velocities, carried out by dipole sonic imager (DSI) logs, provides invaluable data in geophysical interpretation, geomechanical studies and hydrocarbon reservoir characterization. The presented study proposes an improved methodology for making a quantitative formulation between conventional well logs and sonic wave velocities. First, sonic wave velocities were predicted from conventional well logs using artificial neural network, fuzzy logic, and neuro-fuzzy algorithms. Subsequently, a committee machine with intelligent systems was constructed by virtue of hybrid genetic algorithm-pattern search technique while outputs of artificial neural network, fuzzy logic and neuro-fuzzy models were used as inputs of the committee machine. It is capable of improving the accuracy of final prediction through integrating the outputs of aforementioned intelligent systems. The hybrid genetic algorithm-pattern search tool, embodied in the structure of committee machine, assigns a weight factor to each individual intelligent system, indicating its involvement in overall prediction of DSI parameters. This methodology was implemented in Asmari formation, which is the major carbonate reservoir rock of Iranian oil field. A group of 1,640 data points was used to construct the intelligent model, and a group of 800 data points was employed to assess the reliability of the proposed model. The results showed that the committee machine with intelligent systems performed more effectively compared with individual intelligent systems performing alone.     

Drought characterization using a new copula-based trivariate approach

Meteorological drought is a natural climatic phenomenon that occurs over various time scales and may cause significant economic, environmental and social damages. Three drought characteristics, namely duration, average severity and peak intensity, are important variables in water resources planning and decision making. This study presents a new method for construction of three-dimensional copulas to describe the joint distribution function of meteorological drought characteristics. Using the inference function for margins, the parameters for six types of copulas were tested to select the best-fitted copulas. According to the values of the log-likelihood function, Galambos, Frank and Clayton were the selected copula models to describe the dependence structure for pairs of duration–severity, severity–peak and duration–peak, respectively. Trivariate cumulative probability, conditional probability and drought return period were also investigated based on the derived copula-based joint distributions. The proposed model was evaluated over the observed data of a Qazvin synoptic station, and the results were compared with the empirical probabilities. For measuring the model accuracy, R ², root mean square error (RMSE) and the Nash–Sutcliffe efficiency (NSE) criteria were used. Results indicated that R ², RMSE and NSE were equal to 0.91, 0.098 and 0.668, respectively, which demonstrate sufficient accuracy of the proposed model. Drought probabilistic characteristics can provide useful information for water resource planning and management.     

Designing infill directional drilling in mineral exploration by using particle swarm optimization algorithm

Geostatistical optimization in designing infill boreholes is an important cost-effective approach in increasing the accuracy of the tonnage and grade of an ore deposit. In this research, a new approach is proposed to design the optimum infill directional boreholes. In the proposed approach, the Kriging estimation variance is considered as the objective function and the number and properties of the optimum boreholes are estimated to minimize the objective function. The optimization procedure is implemented by Particle Swarm Optimization (PSO) algorithm. Range of the spatial and directional properties of new boreholes is determined by considering the primary information of the mineralization and administrative constraint of drilling. Then, the PSO algorithm is iteratively applied, and in each iteration, the variation of the estimated Kriging variance after drilling the new boreholes is determined and properties of the new boreholes are updated. The iterative procedure of the algorithm is continued until minimum Kriging variance is satisfied. The approach was applied to the Dalli Cu-Au porphyry deposit in Iran and three new infill directional boreholes were designed by considering six earlier boreholes from the preliminary exploration stage. New optimum boreholes were located where less information from the preliminary exploration stage exists and the highest variance is considered. Two new boreholes are near to vertical (78°) and the third is an inclined with 55° dip. By drilling these three new boreholes, the estimated grade model could be upgraded by 20%. For simplicity, quickness and the ability to search for the required numbers and specifications of a group of directional boreholes in a 3D environment are the most advantages aspects of the proposed approach.     

The effect of different meteorological parameters on the temporal variations of reference evapotranspiration

Temporal changes of meteorological variables can affect reference evapotranspiration (ET₀). The goal of the present research is to analyze the changes of ET₀ and identify the impact of effective meteorological parameters to the changes of ET₀. For this purpose, daily meteorological data recorded in 30 synoptic stations of Iran during 1960–2014 were used. The annual and seasonal values of ET₀ were calculated by the recorded data. To calculate ET₀, FAO56 Penman–Monteith method (standard method) was used. The annual and seasonal trends of ET₀ and its eight effective parameters were analyzed. Then the contributions of effective parameters changes on ET₀ were determined. To analyze ET₀ trend at annual and seasonal scales, two common methods, Spearman’s Rho and Mann–Kendall tests, were used. The R ² = 0.99 showed that the results of the mentioned methods were similar and on the basis of T-statistic <0.057, their difference was not significant (95% confidence level). Therefore, only one method’s results (Spearman’s Rho) were reported. On the basis of Spearman’s Rho results, the annual and seasonal values of ET₀ had negative trend in most of arid and semi-arid stations while the trend of this parameter was positive in humid and very humid stations. At annual and seasonal scales, decreasing in wind speed (W), temperature (T), sunshine hours (n), minimum temperature (TN), dew point temperature (TD), maximum temperature (TX), saturation vapor pressure deficit (SVPD) and solar radiation (RS) was observed in 58, 54, 39, 43, 56, 65, 65 and 37% studied stations, respectively. In many scales, the results showed that TX and W were the most effective meteorological variables on ET₀ changes and then SVPD was located in second step in arid and semi-arid stations. In humid and very humid stations, W was the first effective parameter at all scales, except autumn.     

Synthesis of biochar from sugarcane filter-cake and its impacts on physiological performance of lettuce (<Emphasis Type="Italic">Lettuce sativa</Emphasis>) grown on cadmium contaminated soil

Soil contamination with cadmium has become major concern all over the world because of its adverse impacts on ecosystem health and agricultural land. Soil amendment with biochar may have varied effects on physical and chemical properties of soil. The objective of the study was to explore the impact of sugarcane filter-cake biochar on physiological performance and growth of lettuce in an aged soil. Four different doses (0, 1.5%, 3%, and 5%) of biochar were used in the soil and conditioned for 1 month. After this, lettuce seedlings were grown in the soil. The results showed that the biochar treatment improved the fresh and dry biomass of leaves and roots as well as plant height while diminished the bioavailability of cadmium from the soil. As compared to control, biochar significantly enhanced the chlorophyll content in lettuce leaves. Due to the biochar amendment, the oxidative stress decreased in lettuce shoots over the control. As compared to control, concentration of cadmium in lettuce significantly decreased after the application of biochar. It was concluded that biochar could mitigate the toxicity of cadmium in lettuce by altering the biochemical and physiological processes in cadmium contaminated soil.     

A new approach for developing comprehensive agricultural drought index using satellite-derived biophysical parameters and factor analysis method

The accurate assessment of drought and its monitoring is highly depending on the selection of appropriate indices. Despite the availability of countless drought indices, due to variability in environmental properties, a single universally drought index has not been presented yet. In this study, a new approach for developing comprehensive agricultural drought index from satellite-derived biophysical parameters is presented. Therefore, the potential of satellite-derived biophysical parameters for improved understanding of the water status of pistachio (Pistachio vera L.) crop grown in a semiarid area is evaluated. Exploratory factor analysis with principal component extraction method is performed to select the most influential parameters from seven biophysical parameters including surface temperature (T _s), surface albedo (α), leaf area index (LAI), soil heat flux (G _o), soil-adjusted vegetation index (SAVI), normalized difference vegetation index (NDVI), and net radiation (R _n). T _s and G _o were found as the most effective parameters by this method. However, T _s, LAI, α, and SAVI that accounts for 99.6 % of the total variance of seven inputs were selected to model a new biophysical water stress index (BPWSI). The values of BPWSI were stretched independently and compared with the range of actual evapotranspiration estimated through well-known METRIC (mapping evapotranspiration at high resolution with internal calibration) energy balance model. The results showed that BPWSI can be efficiently used for the prediction of the pistachio water status (RMSE of 0.52, 0.31, and 0.48 mm/day on three image dates of April 28, July 17, and August 2, 2010). The study confirmed that crop water status is accounted by several satellite-based biophysical parameters rather than single parameter.