Investigation of the groundwater modelling component of the Integrated Water Flow Model (IWFM)

ABSTRACT

The Integrated Water Flow Model (IWFM), developed by the California Department of Water Resources, is an integrated hydrological model that simulates key flow processes including groundwater flows, streamflow, stream–aquifer interactions, rainfall–runoff and infiltration. It also simulates the agricultural water demand as a function of soil, crop and climatic characteristics, as well as irrigation practices, and allows the user to meet these demands through pumping and stream diversions. This study investigates the modelling performance of the groundwater module of IWFM using several hypothetical test problems that cover a wide range of settings and boundary conditions, by comparing the simulation results with analytical solutions, field and laboratory observations, or with results from MODFLOW outputs. The comparisons demonstrate that IWFM is capable of simulating various hydrological processes reliably.

EDITOR M.C. Acreman; ASSOCIATE EDITOR A. Efstratiadis     

Delineation of groundwater potential zones using remote sensing and GIS-based data-driven models

The rapid increase in human population has increased the groundwater resources demand for drinking, agricultural and industrial purposes. The main purpose of this study is to produce groundwater potential map (GPM) using weights-of-evidence (WOE) and evidential belief function (EBF) models based on geographic information system in the Azna Plain, Lorestan Province, Iran. A total number of 370 groundwater wells with discharge more than 10 m³s^?1were considered and out of them, 256 (70%) were randomly selected for training purpose, while the remaining114 (30%) were used for validating the model. In next step, the effective factors on the groundwater potential such as altitude, slope aspect, slope angle, curvature, distance from rivers, drainage density, topographic wetness index, fault distance, fault density, lithology and land use were derived from the spatial geodatabases. Subsequently, the GPM was produced using WOE and EBF models. Finally, the validation of the GPMs was carried out using areas under the ROC curve (AUC). Results showed that the GPM prepared using WOE model has the success rate of 73.62%. Similarly, the AUC plot showed 76.21% prediction accuracy for the EBF model which means both the models performed fairly good predication accuracy. The GPMs are useful sources for planners and engineers in water resource management, land use planning and hazard mitigation purpose.     

Pore scale study of permeability and tortuosity for flow through particulate media using Lattice Boltzmann method

In this paper, Lattice Boltzmann method (LBM) has been used to study the effects of permeability and tortuosity on flow through saturated particulate media and identify the relationships between permeability and tortuosity with other parameters such as particles diameter, grain specific surface, and porosity. LBM is a simple kinematic model that can incorporate the essential physics of microscopic and mesoscopic processes involved in flow through granular soils. The obtained results indicate that the 2D LB model, due to its inherent theoretical advantages, is capable of demonstrating that the porosity and specific surface are the most influential parameters in determining the intrinsic permeability of granular media. The obtained results show that particles' size diameter has a two‐fold effect on the coefficient of permeability: one is through specific surface and the other is by tortuosity factor. Numerical study also reveals that tortuosity of granular soils decreases almost linearly with increasing the porosity. Copyright © 2010 John Wiley & Sons, Ltd.     

Hydrogeological studies on the Nubian sandstone aquifer in El-Bahariya Oasis, Western Desert, Egypt

The current study aimed to evaluate hydrogeologically the Nubian sandstone aquifer in El-Bahariya Oasis. It represents the main water-bearing horizon in the study area and consists of continental elastic sediments, mainly sandstone alternating with shale and clays. The general flow lines are directed from SW to NE direction, as detected from the constructed potentiometric head contour map. The piezometric surface reaches 149 m in El-Heiz area at the southern part, while it reaches 90 m at the northern, reflecting higher pressure head of the aquifer in the southern part. The map also illustrates that the southern part is considered as the most promising location for development. The structural elements play an important role in the deposition and distribution of the sedimentary succession of the Nubian sandstone sediments. Consequently, this sedimentary pattern affects the occurrences and movements of the groundwater within the aquifer system. Along the structurally high areas, in the study area, the piezometric head increases, while the reverse is recorded along the structurally low areas. The step-drawdown tests data were carried out by calculating the aquifer loss coefficient (B) and the well loss constant (C). The B values are smaller compared with C values, indicating that the aquifer under pressure has a behavior of leaky aquifer; therefore, it shows hydraulic connection with surrounding formation. The values of well efficiency range from 78.50% to 87.76%. Analysis of 12 pumping test data (constant discharge tests) was carried out in order to calculate the Nubian aquifer hydraulic parameters (transmissivity, hydraulic conductivity, and storage coefficient). The transmissivity values decrease from 3,045 m²/day in the southern part (El-Heiz area) to 236 m²/day in the northeastern part (El-Harra area). Accordingly, the aquifer classified as a high to moderate potentiality. Transmissivity contour map observes gradual increase of transmissivity values from the southern to northeastern direction. This may be due to the increase of shale or clay content in the concerned aquifer in that direction. The storage coefficient values range between 1.04 × 10^?4 and 5.22 × 10^?3, as obtained from the results of pumping test analysis, which ensure that the Nubian sandstone aquifer is classified as semi-confined to confined aquifer type. The S values show a decrease from southwest to northeast direction as detected from S-map. The hydraulic conductivity values vary from to 0.46 m/day in the northern part to 10.88 m/day in the southern part with an average of 5.67 m/day. According to the classification based on K values, the aquifer is mainly composed of coarse sand.     

Pliocene–Quaternary fluvial and aeolian records in the Souss Basin, southwest Morocco: A geomorphological model

The Souss Basin in SW Morocco is filled by Pliocene–Quaternary fluvial, fluvio-lacustrine and aeolian sediments, representing an excellent archive of palaeohydrology, palaeoclimate and the effects of crustal deformation. In general these sediments indicate stream-dominated alluvial systems, influenced by fluctuations in climate (humidity/aridity). Lakes developed within the basin around the Pliocene–Pleistocene transition and persisted into the Early Pleistocene. During this early period, relatively humid conditions are indicated by the dominance of coarse-grained sedimentation in the upper reaches of fluvial systems, the existence of large lakes and the considerable sediment thicknesses in the centre of the basin. Uplift of the surrounding mountain ranges contributed to piedmont formation by providing large amounts of coarse-grained material that accumulated at the lowland margin. Climatic deterioration in the Middle Pleistocene was accompanied by progressively more irregular and disrupted fluvial regimes. These trends were evident in the Late Pleistocene and became clearer after the mid-Holocene, with aeolian activity becoming the dominant sedimentary agent. Differences between upstream and downstream depositional regimes became marked: while coarse-grained sedimentation has characterized the upper reaches of wadi catchments, fine-grained sedimentation has prevailed downstream. Hiatuses in sedimentation throughout the Pliocene and Quaternary are marked by palaeosol horizons interbedded within the sedimentary sequences, indicating alternate vegetated (stable) and unvegetated (unstable/active) phases (biostasy and ‘rhexistasy’).     

Assessment of sediment yield estimations for large watershed areas: a case study for the Seyhan,Demirköprü and Hirfanlı reservoirs in Turkey

Abstract

Analyses of data from reservoir surveys and sediment rating curves are compared to predict sediment yield in three large reservoir watershed areas in Turkey. Sediment yield data were derived from reservoir sedimentation rates and suspended sediment measurements at gauging stations. The survey data were analysed to provide the volume estimates of sediment, the time-averaged sediment deposition rates, the long-term average annual loss rates in the reservoir storage capacity, and the long-term sediment yield of the corresponding watershed areas. Four regression methods, including linear and nonlinear cases, were applied to rating curves obtained from gauging stations. Application of the efficiency test to a power function form of a rating curve with nonlinear regression yielded the highest efficiency values. Based on the analysis of the sediment rating curves, sediment load fluxes were calculated by using average daily discharge data at each gauging station. Comparison of these two sediment yield values for each reservoir showed that the sediment yields from the suspended sediment measurements, SY_GS, are 0.99 to 3.54 times less than those obtained from the reservoir surveys, SY_RS. The results from the reservoir surveys indicate that all three reservoirs investigated have lost significant storage capacity due to high sedimentation rates.     

Correction to: Future changes in Atlantic hurricanes with the rotated-stretched ARPEGE-Climat at very high resolution

Climate Dynamics - The original article can be found online.     

Hydrothermal alteration and evolution of Zr-Th-U-REE mineralization in the microgranite of Wadi Ras Abda,North Eastern Desert,Egypt

Ras Abda plutonic suite, North Eastern Desert of Egypt, consists predominantly of Neoproterozoic calc-alkaline older granites. Minor exposures of pink microgranite are occurring along Wadi Ras Abda within the older granites. Previous studies on this area demonstrated that the microgranite is altered in some parts and contains anomalous concentrations of rare metal elements (Zr, Th, and U). These altered and mineralized zones are re-assessed using field observations, chemical analysis, and by the application of various transmitted light and electron microscopic techniques. The rare metals exist as mineral segregation grew freely into open cavities of the microgranite and concordant with the NNE strike-slip fault movement. The mineralized zones contain an assemblage of secondary magnetite, zircon, uranothorite, columbite-(Mn), fergusonite-(Y), and allanite-(Ce). The extreme abundance of zircon in the mineralized zone, along with other evidence, indicates a hydrothermal origin of this zircon together with associated rare metals. The geochemical investigation and mass balance calculations revealed extreme enrichment of Zr, Th, U, Y, Nb, Ta, and REE. Post-magmatic hydrothermal alterations resulted in such pronounced chemical and mineralogical heterogeneity. The hydrothermal fluids are thought to be oxidizing, alkaline and of medium temperature (>?250 °C). The average contents of the elements Zr (1606 ppm), Th (1639 ppm), U (306 ppm), Nb (955 ppm), and REE (1710 ppm) in the mineralized microgranite reach sub-economic levels and could be a potential source of these elements.