Towards New Swedish Recommendations for Cautious Perimeter Blasting

A Swedish table of blast damage depths has, in one form or other, been in use since the late-1970s. Its history and the underlying theory are described. New experimental and theoretical findings that point out a number of shortcomings in the table and the underlying theory are presented and discussed. A revised version of the blast damage table was recently introduced in conjunction with new but incomplete recommendations for cautious perimeter blasting. The new table leaves the difficult task of taking into account factory like decoupling, water in the borehole, the rock properties, type of initiation, charge length and the actual bit diameter to the user. This paper discusses different ways of doing this, based on the experimental findings and a recent formula for the prediction of the lengths of radial cracks behind the half-casts. The material presented in this paper is meant to supplement and extend the new Swedish recommendations for cautious perimeter blasting of tunnels, shafts, pits and road cuts.     

Gold Occurrence and Ore Genesis,Yata Micro—Disseminated Gold Deposit,Guizhou,Southwest China

The mode of occurrence of gold in the Yata micro-disseminated gold deposit is ap-proached through chemical phase studies coupled with ore-dressing monitoring and micro-beam analysis.The results showed that gold occurred for the most part as ultra-microscopic particles adsorbed on the surfaces or fracture planes of pyrite and other sulphides.The proportions of gold of different occurrences were estimated solutions containing nanometer-sized gold particles were prepared following the hydrolysis-reduction procedure and the adsorption of nanometer-sized gold on ordinary sulphides and rocks was experimentally determined.It is evident that sulphides are good adsorbents of gold and this is consistent with geological observations.     

Image analysis applied to quantitative evaluation of chromatic impact generated by open-pit quarries and mines

One of the most important environmental impacts resulting from opencast mining, and especially quarries, is the visual impact. Evaluation of this impact considers two aspects: first, the area occupied by the quarry as seen by an observer from a specific place, and, second, the chromatic contrast existing between landscape and exploitation. In this study we develop a methodology to assess the chromatic impact in an objective and comparable form. To assess this impact we developed a method based on image analysis that allows us to obtain from a picture or image its equivalent as a function of chromatic impact, according to the sensibility of the human eye to different wavelengths. The methodology was applied to the Martinenca limestone quarry (Alcanar, Tarragona) and to Cerro Kori Kollo mine, La Joya district (Bolivia).     

Intercomparison of IRS-P4-MSMR derived geophysical products with DMSP-SSM/I and TRMM-TMI finished products

In this paper, MSMR geophysical products like Integrated Water Vapour (IWV), Ocean Surface Wind Speed (OWS) and Cloud Liquid Water (CLW) in different grids of 50, 75 and 150 kms are compared with similar products available from other satellites like DMSP-SSM/I and TRMMTMI. MSMR derived IWV, OWS and CLW compare well with SSM/I and TMI finished products. Comparison of MSMR derived CLW with that derived from TMI and SSM/I is relatively in less agreement. This is possibly due to the use of 37 GHz in SSM/I and TMI that is highly sensitive to CLW, while 37 GHz channels are not available on MSMR. Monthly comparison of MSMR geophysical products with those from TMI is all carried out for climatological purpose. The monthly comparisons were much better compared to instantaneous comparisons. In this paper, details of the data analysis and comparison results are presented. The usefulness of the MSMR vis-à-vis other sensors is also discussed.     

Petrology and geochemistry of orthoamphibolites from the Variscan metamorphic sequences of the South Tisia in Croatia – an overview with geodynamic implications

In the southern Pannonian Basin, the Variscan Barrovian- and overprinted Abukuma-type progressive metamorphic sequences of the South Tisia in Slavonian Mts. (SM) and Mt. Moslava)ka Gora (MG) are interlayered with orthoamphibolites. These sequences represent part of a disrupted Variscan belt that extends southeastwards of the Bohemian Massif through the Carpathians to the Caucasus. Orthoamphibolites contain hornblende (Mg-hornblende, tschermakite, pargasite, and edenite), plagioclase An_48-98 (MG) and An_26-35 (SM), biotite, grossular (MG) and almandine (SM) enriched garnet, diopside (MG), with accessory ilmenite, titanite, and clinozoisite. Based on major and trace element analyses and CIPW norms, these orthoamphibolites, which originally were olivine tholeiites to slightly alkalic basalts, can be correlated with tholeiites of consuming plate margins. '¹⁸O of orthoamphibolites varies from 5.8 to 7.1‰, the measured ⁸⁷Sr/⁸⁶Sr ratio from 0.70435 to 0.70665, which indicates slight continental crust contamination, and the calculated ratio from 0.70262 to 0.70535, indicating an upper mantle origin of the original basaltic melts. For associated penecontemporaneous I-type granitoids, the calculated initial ⁸⁷Sr/⁸⁶Sr ratio also have upper mantle values ranging between 0.70293 and 0.70368. Geochemical data for orthoamphibolites and the associated penecontemporaneous I-type granites, and the occurrence of alpine-type ultramafic bodies within the Barrovian sequence, indicate that they have many features in common with orogenic associations related to recent subduction-related settings. Some characteristic element ratios suggest back-arc basin environments and the Ce/K vs. Ce diagram suggests a pargasite-lherzolite source. Its partial melting gave primitive basaltic melts of olivine tholeiite to slight alkalic affinities that produced at first differentiated mafic rocks by olivine fractionation (future orthoamphibolites) and, afterwards, a strongly differentiated suite of I-type granitoids by amphibole fractionation. Magma emplacement and subsequent AFC processes took place in subduction environments preceding the main Variscan deformational metamorphic event during which orthoamphibolites were generated. This interpretation is compatible with geodynamic modeling of this part of the Paleotethys.     

Hydraulic Characteristics of Rough Fractures in Linear Flow under Normal and Shear Load

Summary A hydro-mechanical testing system, which is capable of measuring both the flow rates and the normal and shear displacement of a rock fracture, was built to investigate the hydraulic behaviour of rough tension fractures. Laboratory hydraulic tests in linear flow were conducted on rough rock fractures, artificially created using a splitter under various normal and shear loading. Prior to the tests, aperture distributions were determined by measuring the topography of upper and lower fracture surfaces using a laser profilometer. Experimental variograms of the initial aperture distributions were classified into four groups of geostatistical model, though the overall experimental variograms could be well fitted to the exponential model. The permeability of the rough rock fractures decayed exponentially with respect to the normal stress increase up to 5 MPa. Hydraulic behaviours during monotonic shear loading were significantly affected by the dilation occurring until the shear stress reached the peak strength. With the further dilation, the permeability of the rough fracture specimens increased more. However, beyond shear displacement of about 7 to 8 mm, permeability gradually reached a maximum threshold value. The combined effects of both asperity degradation and gouge production, which prohibited the subsequent enlargement of mean fracture aperture, mainly caused this phenomenon. Permeability changes during cyclic shear loading showed somewhat irregular variations, especially after the first shear loading cycle, due to the complex interaction from asperity degradations and production of gouge materials. The relation between hydraulic and mechanical apertures was analyzed to investigate the valid range of mechanical apertures to be applied to the cubic law. Received June 12, 2001; accepted February 26, 2002 Published online September 2, 2002     

Geochemical Studies of Sodium Enriched Metavolcanite Series in the Area of Longbohe Copper Deposit,Yunnan Province,SW China：Nd,Sr and Pb Isotopic Characteristics and Chronology

The chronological data obtained by a variety of dating methods have confirmed that the sodium enriched metavolcanite series in the area of the Longbohe copper deposit at Jinping, Yunnan Province, was formed during the Proterozoic (its Pb−Pb isochron age=1595±75 Ma), corresponding to the Dahongshan Group sodium enriched metavolcanites. The Sm−Nd isochron age of 1336±46Ma should represent the time at which this series of volcanic rocks experienced spilitization in response to sodium metasomatism, equivalent to the time of sedimentation of the Ailaoshan Group and Yashan Group rocks. The Rb−Sr ages of the volcanic rocks and the Pb−Pb ages of copper ores have recorded the events of strong dynamic metamorphism and of strong reworking-metallogenesis of copper during the Jinningian period. Similarities in forming age, rock assemblage and isotopic characteristics between the sodium enriched metavolcanite series and the Dahongshan Group sodium enriched metavolcanite series have provided new clues to the exploration of the Dahongshan-type copper deposits in this area. Granted jointly by the National Natural Science Foundation of China (Nos. 49702022, 40073001) and the State 973 Program (No. G1999043215).