Two stages of high-pressure metamorphism in the Main Uralian Fault area (northern Urals)

Metamorphism in the northern sector of the Main Uralian Fault (MUF) area, northern Urals, is considered by the example of the Salatim glaucophane-schist and Belokamenka kyanite-staurolite complexes. New isotope-geochronological dates for metamorphic rocks of the MUF area are presented. The obtained data evidence the existence of two metamorphic events, of Early and Late Devonian ages, which apparently correspond to the wedging-up of subduction paleozones.     

Tectonic evolution of the Siberian Platform during the Vendian and Phanerozoic

This paper presents characteristics of the structural regions surrounding the Siberian Platform and discusses the Vendian-present time evolution of the Siberian Paleocontinent with the Siberian Craton making up its nucleus. It shows that the paleocontinent underwent significant intraplate compressional deformations with vertical movements and formation of inversion structural features within broad areas. Such epochs of deformation took place at the Riphean-Vendian time boundary, during the Late Paleozoic, Late Triassic, Early Cretaceous, and during the Late Cenozoic. The principal rifting events took place during the Middle-Late Devonian. The paper presents paleotectonic reconstructions of East Siberia at several key time intervals.     

Evolution of zircon deformation mechanisms in a shear zone (Lanzo massif,Western-Alps)

Magmatic zircons within two sheared gabbroic dykes from the peridotitic massif of Lanzo (Western-Alps, Italy) revealed evolution of deformation from crystal plasticity to rigid body rotation during shear zone evolution. This is the first time that multiple zircon grains have been analysed in a kinematic context in a shear zone. Zircon grains recorded crystal plastic deformation activating the commonly inferred <100>{001} and <001>{100} glide-systems to the newly identified <001>{110} glide-system. The exact selection of glide-system could be dependant of deformation conditions such as pressure, temperature, and strain rate. Moreover, the activation of one or several glide-systems within a single grain could be favoured by the primary orientation of the grains combined with a high strain rate. In these sheared gabbros, the deformation mechanisms evolve from plastic deformation at low strain rate conditions to increase strain, strain softening and localisation of deformation. The progressive shear zone development and the softening of the matrix relative to the zircon has lead to a switch from crystal-plasticity to rigid body rotation of zircon. The zircon grains rigid body rotation involved that their long axes became parallel to the lineation of the shear zone, causing reorientation and dispersion of the misorientation axes away from kinematic Y.     

Decomposition of Hudson estuary macrophytes: Photosynthetic pigment transformations and decay constants

Plant pigment decay constants were determined for four macrophytes collected from the Hudson Estuary.Typha angustifolia andScirpus fluviatilis were used as representatives of emergent aquatic vegetation (EAV), andPotamogeton sp. andVallisneria americana were used to represent submerged aquatic vegetation (SAV). Litter bags were maintained in an environmental chamber in the dark for 104 d. The fastest rate of total mass loss was in the SAVV. americana and slowest in the EAVT. angustifolia. Changes in carotenoid and chloropigment concentration resulting from microbial and meiofaunal heterotrophy in each of the macrophytes were quantified using reverse-phase, high-performance liquid chromatography (RP-HPLC) techniques. Chlorophyllc and the carotenoid, fucoxanthin, provided useful biomarkers in determining the presence of epiphytic diatom growth, which only occurred on the SAV. The highest concentrations of phaeophorbidea, commonly used as an indication of metazoan grazing, were found in the SAVV. americana. Low concentrations of phaeophorbidea in the SAVPotamogeton sp. indicate inefficient use of this SAV by meiofaunal grazers. Lutein decayed slower than all other carotenoids in both EAV and SAV. Microcosm studies such as this are necessary to further understand the mechanisms and kinetics of photosynthetic pigment transformations in natural systems.     

Stokes-meter observations of the solar mean magnetic field: Probable manifestations of strong small-scale magnetic fields

For many years, information on the solar mean magnetic field (SMMF) of the Sun—an important heliophysical and astrophysical parameter—was restricted to magnetographic measurements in only one spectral line, FeI λ525.02 nm. More informative observations of the Stokes-meter parameters of the SMMF were first initiated on a regular basis at the Sayan Solar Observatory. The availability of I and V data obtained simultaneously in several spectral lines has made it possible to study fundamentally new physical problems. In this paper, based on a comparison of SMMF observations in several spectral lines, we find high correlations in the data and important systematic differences in the magnetic-field strength B, which we interpret as a manifestation of kilogauss magnetic fields in fine-structure magnetic elements. Results of theoretical modeling of the SMMF strength ratios for the FeI λ525.02 nm-FeI λ524.70 nm and FeI λ630.15 nm-FeI λ630.25 nm lines are presented. The asymmetries of the V profiles of four lines near the FeI λ525.02 nm line are examined; these lines are important diagnostics for studies of small-scale dynamical processes. The Sayan Solar Observatory SMMF measurements are in good consistency with the Wilcox Solar Observatory data for 2003: for a comparison of N = 137 pairs of points in the two data sets, the correlation coefficient ρ is 0.92 for the linear regression between the datasets B_WSO = 0.03(±0.05) + 0.93(±0.03)B_SSO.     

Porphyroblast rotation during crenulation cleavage development: an example from the aureole of the Mooselookmeguntic pluton, Maine, USA

In the low‐pressure, high‐temperature metamorphic rocks of western Maine, USA, staurolite porphyroblasts grew at c. 400 Ma, very late during the regional orogenesis. These porphyroblasts, which preserve straight inclusion trails with small thin‐section‐scale variation in pitch, were subsequently involved in the strain and metamorphic aureole of the c. 370 Ma Mooselookmeguntic pluton. The aureole shows a progressive fabric intensity gradient from effectively zero emplacement‐related deformation at the outer edge of the aureole ～2900 m (map distance) from the pluton margin to the development of a pervasive emplacement‐related foliation adjacent to the pluton. The development of this pervasive foliation spanned all stages of crenulation cleavage development, which are preserved at different distances from the pluton. The spread of inclusion‐trail pitches in the staurolite porphyroblasts, as measured in two‐dimensional (2‐D) thin sections, increases nonlinearly from ～16° to 75° with increasing strain in the aureole. These data provide clear evidence for rotation of the staurolite porphyroblasts relative to one another and to the developing crenulation cleavage. The data spread is qualitatively modelled for both pure and simple shear, and both solutions match the data reasonably well. The spread of inclusion‐trail orientations (40–75°) in the moderately to highly strained rocks is similar to the spread reported in several previous studies. We consider it likely that the sample‐scale spread in these previous studies is also the result of porphyroblast rotation relative to one another. However, the average inclusion‐trail orientation for a single sample may, in at least some instances, reflect the original orientation of the overgrown foliation.     

Gold ore-forming fluids of the Tanami region, Northern Australia

Fluid inclusion studies have been carried out on major gold deposits and prospects in the Tanami region to determine the compositions of the associated fluids and the processes responsible for gold mineralization. Pre-ore, milky quartz veins contain only two-phase aqueous inclusions with salinities ≤19 wt% NaCl eq. and homogenization temperatures that range from 110 to 410°C. In contrast, the ore-bearing veins typically contain low to moderate salinity (<14 wt% NaCl eq.), H₂O + CO₂ ± CH₄ ± N₂-bearing fluids. The CO₂-bearing inclusions coexist with two-phase aqueous inclusions that exhibit a wider range of salinities (≤21 wt% NaCl eq.). Post-ore quartz and carbonate veins contain mainly two-phase aqueous inclusions, with a last generation of aqueous inclusions being very CaCl₂-rich. Salinities range from 7 to 33 wt% NaCl eq. and homogenization temperatures vary from 62 to 312°C. Gold deposits in the Tanami region are hosted by carbonaceous or iron-rich sedimentary rocks and/or mafic rocks. They formed over a range of depths at temperatures from 200 to 430°C. The Groundrush deposit formed at the greatest temperatures and depths (260–430°C and ≤11 km), whereas deposits in the Tanami goldfield formed at the lowest temperatures (≥200°C) and at the shallowest depths (1.5–5.6 km). There is also evidence in the Tanami goldfield for late-stage isothermal mixing with higher salinity (≤21 wt% NaCl eq.) fluids at temperatures between 100 and 200°C. Other deposits (e.g., The Granites, Callie, and Coyote) formed at intermediate depths and at temperatures ranging from 240 to 360°C. All ore fluids contained CO₂ ± N₂ ± CH₄, with the more deeply formed deposits being enriched in CH₄ and higher level deposits being enriched in CO₂. Fluids from deposits hosted mainly by sedimentary rocks generally contained appreciable quantities of N₂. The one exception is the Tanami goldfield, where the quartz veins were dominated by aqueous inclusions with rare CO₂-bearing inclusions. Calculated δ ¹⁸O values for the ore fluids range from 3.8 to 8.5‰ and the corresponding δD values range from −89 to −37‰. Measured δ ¹³C values from CO₂ extracted from fluid inclusions ranged from −5.1 to −8.4‰. These data indicate a magmatic or mixed magmatic/metamorphic source for the ore fluids in the Tanami region. Interpretation of the fluid inclusion, alteration, and structural data suggests that mineralization may have occurred via a number of processes. Gold occurs in veins associated with brittle fracturing and other dilational structures, but in the larger deposits, there is also an association with iron-rich rocks or carbonaceous sediments, suggesting that both structural and chemical controls are important. The major mineralization process appears to be boiling/effervescence of a gas-rich fluid, which leads to partitioning of H₂S into the vapor phase resulting in gold precipitation. However, some deposits also show evidence of desulfidation by fluid–rock interaction and/or reduction of the ore-fluid by fluid mixing. These latter processes are generally more prevalent in the higher crustal-level deposits.     

Geochemistry of hydrothermal alteration at the Roosevelt hot springs thermal area,Utah

Hot spring deposits in the Roosevelt thermal area consist of opaline sinter and sintercemented alluvium. Alluvium, plutonic rocks, and amphibolite-facies gneiss have been altered by acidsulfate water to alunite and opal at the surface, and alunite, kaolinite, montmorillonite, and muscovite to a depth of 70 m. Marcasite, pyrite, chlorite, and calcite occur below the water table at about 30 m.The thermal water is dilute (ionic strength 0.1–0.2) sodium-chloride brine. The spring water now contains 10 times as much Ca, 100 times as much Mg, and up to 2.5 times as much SO₄ as the deep water. Although the present day spring temperature is 25°C, the temperature was 85°C in 1950.A model for development of the observed alteration is supported by observation and irreversible mass transfer calculations. Hydrothermal fluid convectively rises along major fractures. Water cools by conduction and steam separation, and the pH rises due to carbon dioxide escape. At the surface, hydrogen and sulfate ions are produced by oxidation of H₂S. The low pH water percolates downward and reacts with feldspar in the rocks to produce alunite, kaolinite, montmorillonite, and muscovite as hydrogen ion is consumed.     

Complex Archean lower crustal structure revealed by COCORP crustal reflection profiling in the Wind River Range,Wyoming

A COCORP deep crustal reflection profile across the Wind River uplift crosses exposed Archean rocks and resolves an unusual complex deep crustal structure at a depth of 24–31 km in an area where depth relations in Precambrian rocks can be inferred. The different levels of exposure across the beveled plunge of the Wind River uplift reveal supracrustal rocks at shallower levels with migmatites and pyroxene granulites at deeper levels. For the first time, deep crustal structure from reflection profiling may be interpreted in terms of exposed basement geology. A folded, multilayered deep structure shown by relfection data resembles multiply folded pyroxene granulite interlayered with granitic gneiss exposed in the central Wind River uplift; isoclinal folding is suggested in the folded layered seismic structure. Earlier seismic reflection studies suggested a simpler lower crust. These data indicate that lower crustal structure may have a complexity similar to deeply eroded Precambrian granulite-facies rocks. If this seismic feature represents folded metamorphic rocks, it seems unlikely that this Archean crust could have been thickened by underplating after 2.7 b.y. B.P. and the crust would have to be at least 30 km thich when this structure was formed.