Oysters and Tsunami: Iterative Learning and Nested Governance as Resilience in Post-Disaster Aquaculture in Hokkaido,Japan

This article examines how a community of oyster farmers in Hokkaido, Japan recovered from the 2011 Tōhoku Earthquake and Tsunami, which damaged their aquaculture in Lake Akkeshi. It focuses on how, over the years, nested governance structures facilitated iterative learning, which helped build resilience against unexpected external crises. Drawing on adaptive management and resilience studies, this study examines the historical development of the local fishery cooperative association (FCA) as a series of responses to socio-ecological disasters — responses that this article characterizes as iterative learning. During the recovery after the 2011 tsunami, the FCA functioned as an information hub that directed the flow of knowledge and resources through government and industrial hierarchies, to the benefit of the farmers. This research, conducted between 2015 and 2017, is based on interviews with farmers, cooperative administrators, and government officials, as well as an analysis of archived records, fishery regulations and post-disaster subsidy programs.     

Measurement of persistent organic pollutants (POPs) in plastic resin pellets from remote islands: toward establishment of background concentrations for International Pellet Watch

Plastic resin pellets collected from remote islands in the Pacific, Atlantic, and Indian Oceans and the Caribbean Sea were analyzed for polychlorinated biphenyls (PCBs), dichloro-diphenyltrichloroethane and its degradation products (DDTs), and hexachlorocyclohexanes (HCHs). Concentrations of PCBs (sum of 13 congeners) in the pellets were 0.1-9.9 ng/g-pellet. These were 1-3 orders of magnitude smaller than those observed in pellets from industrialized coastal shores. Concentrations of DDTs in the pellets were 0.8-4.1 ng/g-pellet. HCH concentrations were 0.6-1.7 ng/g-pellet, except for 19.3 ng/g-pellet on St. Helena, where current use of lindane is likely influence. This study provides background levels of POPs (PCBs<10 ng/g-pellet, DDTs <4 ng/g-pellet, HCHs <2 ng/g-pellet) for International Pellet Watch. Sporadic large concentrations of POPs were found in some pellet samples from remote islands and should be considered in future assessments of pollutants on plastic debris.     

Morphometric techniques allow environmental reconstructions from low-diversity continental ostracode assemblages

Quantification of intra-specific morphological variability of aquatic biota along environmental gradients can produce biological proxies that can be applied to paleoenvironmental reconstructions. This morphology-derived proxy information can be especially valuable when dealing with low-diversity fossil assemblages, i.e. in situations when paleoenvironmental inference based on species composition of the assemblage is less effective. We analyzed valve size and outline shape of the widespread and highly environmentally tolerant ostracode species Limnocythere inopinata collected in 15 lakes and ponds of Western Mongolia. We quantified shape variability among and within these living populations in relation to water chemistry and physical habitat variables. Our results indicate that: (1) a population’s mean valve outline is related to habitat type, (2) surface water temperature, the alkalinity to sulphate ratio, specific conductance and total phosphorus together explain a high portion of the variance in mean valve outline between populations, and (3) a quantitative model inferring the alkalinity to sulphate ratio from mean valve outline has an R2 of 0.88 and RMSEP of 0.17. These results corroborate the hypothesis that high morphological variability in this ostracode species is due to both ecophenotypic variance and high clonal diversity associated with a mixed reproductive strategy (a combination of sexual and parthenogenetically reproducing lineages), and underline the value of morphometric techniques in paleoecology.     

Tidal transport through the Tsugaru Strait — part I: Characteristics of the major tidal flow and its residual current

The potential role of the tide-induced time-mean flow (the tidal residual current) in determining transport through the Tsugaru Strait (located between the East/Japan Sea and the North Pacific) is investigated using a high-resolution numerical barotropic model. The calculated K₁, O₁, M₂, and S₂ tidal fields agree well with available observational records derived from both tide gauge and current meter measurements in the strait and the adjacent seas. The tidal residual current speed reaches 0.3 ms⁻¹ in two narrow “neck” areas where topographic sills are located. This result suggests that tides should be taken into account in estimating the long-term water mass and nutrient transport through narrow regions between the East/Japan Sea and the North Pacific. An interesting aspect of the tidal residual current field is the prediction of several active eddy zones in which sequences of eddy triplets develop in the vicinity of capes. Our vorticity analysis reveals that the interplay of topographic effects arising from both the headland and the sill around capes plays a critical role in the formation of these triple eddy patterns.     

Towards a new view of earthquake phenomena

Recent advances in the theory of fracture and fragmentation are reviewed. Empirical laws in seismology are interpreted from a fractal perspective, and earthquakes are viewed as a self-organized critical phenomenon (SOC). Earthquakes occur as an energy dissipation process in the earth's crust to which the tectonic energy is continuously input. The crust self-organizes into the critical state and the temporal and spatial fractal structure emerges naturally. Power-law relations known in seismology are the expression of the critical state of the crust. An SOC model for earthquakes, which explains the Gutenberg-Richter relation, the Omori's formula of aftershocks and the fractal distribution of hypocenters, is presented. A new view of earthquake phenomena shares a common standpoint with other disciplines to study natural complex phenomena with a unified theory.     

Dynamic compaction properties of bentonite-based materials

Dynamic compaction tests of bentonite-based materials (BBMs) with 100, 70 and 50% bentonite contents have been performed using five powdery bentonites with different physicochemical properties to establish the simplified evaluation method for dynamic compaction properties of BBMs. For a given bentonite content and a total compaction energy condition, the maximum dry density, ρ_dmax, and the optimum water content, w_opt, which are well-known indexes of compaction properties, for BBMs were determined according to the type of bentonite used for BBMs. For evaluation of those values of BBMs derived in this study, the plastic limit of BBM, w_pbbm, was defined as the plastic limit that was measured using the sample pulverized to a maximum grain size of less than 425 μm in the case of BBM with sand having a maximum grain size of more than 425 μm and was measured using the powdery bentonite itself in the case of BBM without sand. This study proposed equations for evaluating ρ_dmax and w_opt of BBMs with more than 50% bentonite content under the total compaction energy conditions of 551–2755 kN-m/m³ using w_pbbm. Finally, we related the equations derived in this study to the equation for evaluating hydraulic properties of compacted BBMs proposed in previous work and proposed the preparation method of BBMs with more than 50% bentonite content for constructing BBM buffer by in-situ compaction method.     

Superoxide-mediated Fe(II) formation from organically complexed Fe(III) in coastal waters

Fe(III) complexed by organic ligands (Fe(III)L) is the primary form of dissolved Fe in marine and coastal environments. Superoxide, typically produced in biological and photochemical processes, is one of the reducing agents that contributes to transformation of Fe(III)L to bioavailable, free dissolved Fe(II) (Fe(II)′). In this work, the kinetics of superoxide-mediated Fe(II)′ formation from Fe(III)L in a simulated coastal water system were investigated and a comprehensive kinetic model was developed using citrate and fulvic acid as exemplar Fe-binding ligands. To simulate a coastal environment in laboratory experiments, Fe(III)L samples with various ligand/Fe ratios were incubated for 5 min to 1 week in seawater medium. At each ratio and incubation time, the rate of superoxide-mediated Fe(II)′ formation was determined in the presence of the strong Fe(II) binding ligand ferrozine by spectrophotometrically measuring the ferrous-ferrozine complex generated at a constant concentration of superoxide. The Fe(II)′ formation rate generally decreased with incubation time, as Fe(III)L gradually dissociated to form less reactive Fe(III) oxyhydroxide. However, when the ligand/Fe ratio was sufficiently high, the dissociation of Fe(III)L (and subsequent Fe precipitation) was suppressed and Fe(II)′ was formed at a higher rate. The rate of Fe(II)′ produced during the experiment was explained by the kinetic model. The model confirmed that both the ligand/Fe ratio and incubation time have a significant effect on the pathway via which Fe(II)′ is formed from Fe(III)-fulvic acid complexes.     

Rare earth element measurements and mapping of minerals in the Allende CAI, 7R19‐1, by NanoSIMS ion microprobe

We have established analytical procedures for quantitative rare earth element (REE) measurements by NanoSIMS 50L ion microprobe with 2–10 μm spatial resolution. Measurements are performed by multidetection using energy filtering under several static magnetic field settings. Relative sensitivity factors and REE oxide/REE element secondary ion ratios that we determined for the NanoSIMS match values previously determined for other ion microprobes. REE measurements of 100 ppm REE glass standards yielded reproducibility and accuracy of 0.5–2.5% and 5–15%, respectively. REE measurements of minerals of an Allende type‐A CAI, 7R19‐1, were performed using three different methods: spot analysis, line profile, and imaging. These data are in excellent agreement with previous REE measurements of this inclusion by IMS‐3f ion microprobe. The higher spatial resolution NanoSIMS measurements provide additional insight into the formation process of this CAI and offer a promising new tool for analysis of fine‐grained and complexly zoned materials.     

Transformation dynamics and reactivity of dissolved and colloidal iron in coastal waters

We have investigated the chemical forms, reactivities and transformation kinetics of Fe(III) species present in coastal water with ion exchange and filtration methods. To simulate coastal water system, a mixture of ferric iron and fulvic acid was added to filtered seawater and incubated for a minute to a week. At each incubation time, the seawater sample was acidified with hydrochloric acid and then applied to anion exchange resin (AER) to separate negatively charged species (such as fulvic acid, its complexes with iron and iron oxyhydroxide coated with fulvic acid) from positively charged inorganic ferric iron (Fe(III)′). By monitoring the acid-induced Fe(III)′ over an hour, it was found that iron complexed by fulvic acid dissociated rapidly to a large extent (86–92% at pH 2), whereas amorphous ferric oxyhydroxide particles associated with fulvic acid (AFO-L) dissociated very slowly with the first-order dissociation rate constants ranging from 6.1 × 10^− 5 for pH 3 to 2.7 × 10^− 4 s^− 1 for pH 2. Therefore, a brief acidification followed by the AER treatment (acidification/AER method) was likely to be able to determine fulvic acid complexes and thus differentiate the complexes from the AFO-L particles (the dissolution of AFO-L was insignificant during the brief acidification). The acidification/AER method coupled with a simple filtration technique suggested that the iron–fulvic acid complexes exist in both the < 0.02 μm and 0.02–0.45 μm size fractions in our coastal water system. The truly dissolved iron (< 0.02 μm) was relatively long-lived with a life-time of 14 days, probably due to the complexation by strong ligands. Such an acid-labile iron may be an important source of bioavailable iron in coastal environments, as a significant relationship between the chemical lability and bioavailability of iron has been well recognised.     

Tropospheric delay correction with dense GPS network in L1-SAIF augmentation

The L1-SAIF (L1 Submeter-class Augmentation with Integrity Function) signal is one of the Quasi-Zenith Satellite System (QZSS) navigation signals, which provides an augmentation function for mobile users in Japan. The tropospheric delay correction in the L1-SAIF augmentation is discussed in detail. Because the topographical features in Japan are complicated, the correction information is generated from GPS observation data collected at 200 GPS stations which are densely distributed over Japan. A total of 210 Tropospheric Grid Points (TGPs) are arranged to fully cover Japan. The TGPs that provide the correction information are selected adaptively to achieve the expected correction accuracy. This selection of TGPs is provided by the TGP mask message. Mobile users acquire the zenith tropospheric delay (ZTD) value at neighboring TGPs from the correction messages, and can estimate the local ZTD value accurately by using a suitable ZTD model. Only up to seven L1-SAIF messages are sufficient to provide the full correction information. Accuracy evaluations have proven that it is possible to achieve a correction accuracy of 13.4 mm RMS. The strategy presented here has been implemented into the augmentation system using the L1-SAIF signal, and its application guidance is presented in the QZSS interface specification.