Oxidized and reduced mineral assemblages in greenstone belt rocks of the St. Ives gold camp, Western Australia: vectors to high-grade ore bodies in Archaean gold deposits?

Hydrothermal sulfide–oxide–gold mineral assemblages in gold deposits in the Archaean St. Ives gold camp in Western Australia indicate extremely variable redox conditions during hydrothermal alteration and gold mineralization in space and time. Reduced alteration assemblages (pyrrhotite–pyrite) occur in deposits in the southwest of the camp (e.g., Argo, Junction deposits) and moderately to strongly oxidized assemblages (magnetite–pyrite, hematite–pyrite) occur in deposits in the Central Corridor in the northeast (e.g., North Orchin, Revenge deposits). Reduced mineral assemblages flank the Central Corridor of oxidized deposits and, locally, cut across it along E–W trending faults. Oxidized mineral assemblages in the Central Corridor are focused on gravity lows which are interpreted to reflect abundant felsic porphyritic intrusions at about 1,000 m below present surface. Hydrothermal magnetite predates and is synchronous with early phases of gold-associated albite–carbonate–pyrite–biotite–chlorite hydrothermal alteration. Later-stage, gold-associated pyrite is in equilibrium with hematite. The spatial distribution and temporal sequence of iron sulfides and oxides with gold indicate the presence of at least two spatially restricted but broadly synchronous hydrothermal fluids with contrasting redox states. Sulfur isotope constraints support the argument that the different mineral assemblages reflect differences in redox conditions. The δ ³⁴S values for pyrite for the St. Ives gold camp range between −8.4‰ and +5.1‰ with the negative values occurring in oxidized magnetite-rich domains and slightly negative or positive values occurring in reduced, pyrrhotitic domains. Preliminary spatial and paragenetic analysis of the distribution of iron sulfides and oxides in the St. Ives camp suggests that gold grades are highest where the redox state of the hydrothermal alteration assemblages switches from relatively reduced pyrrhotite–pyrite to relatively oxidized magnetite–pyrite and hematite–pyrite both in space and time. Gold deposition is inferred to have occurred where fluids of contrasting redox state mixed.     

A Late Quaternary lake record from the Qilian Mountains (NW China): lake level and salinity changes inferred from sediment properties and ostracod assemblages

Two sediment cores (length 13.94 and 12.93 m) have been drilled from the small alpine Lake Luanhaizi in the eastern central Qilian Mountains and correlated by means of magnetic susceptibility (MS). This paper focuses on the lithology and chronology of the longer core, on the results of loss on ignition (LOI), element concentration, thermomagnetic as well as magnetic hysteresis loop measurements, and on the ostracod record.The recovered sediments represent three types of depositional environment: a shallow intermittent lake, a deeper permanent lake and a true playa lake. Three stages of a higher lake level and permanence of the water body are reconstructed. The lowermost stage of a permanent lake and inferred favourable environmental conditions occurred probably about 45 ¹⁴C ka BP. The second stage of a deeper permanent lake occurred either shortly before or, more likely, following the LGM. Most favourable environmental conditions and highest water levels were reconstructed for the uppermost stage comprising the Holocene. Considering the lake record, glaciers have not reached the lake site at 3200 m altitude during the LGM, providing further evidence against a large ice sheet on the Tibetan Plateau.     

Importance of Spatial Resolution in Global Groundwater Modeling

Global-scale gradient-based groundwater models are a new endeavor for hydrologists who wish to improve global hydrological models (GHMs). In particular, the integration of such groundwater models into GHMs improves the simulation of water flows between surface water and groundwater and of capillary rise and thus evapotranspiration. Currently, these models are not able to simulate water table depth adequately over the entire globe. Unsatisfactory model performance compared to well observations suggests that a higher spatial resolution is required to better represent the high spatial variability of land surface and groundwater elevations. In this study, we use New Zealand as a testbed and analyze the impacts of spatial resolution on the results of global groundwater models. Steady-state hydraulic heads simulated by two versions of the global groundwater model G³M, at spatial resolutions of 5 arc-minutes (9 km) and 30 arc-seconds (900 m), are compared with observations from the Canterbury region. The output of three other groundwater models with different spatial resolutions is analyzed as well. Considering the spatial distribution of residuals, general patterns of unsatisfactory model performance remain at the higher resolutions, suggesting that an increase in model resolution alone does not fix problems such as the systematic overestimation of hydraulic head. We conclude that (1) a new understanding of how low-resolution global groundwater models can be evaluated is required, and (2) merely increasing the spatial resolution of global-scale groundwater models will not improve the simulation of the global freshwater system.     

Late Pleistocene fans and terraces in the Majes valley, southern Peru, and their relation to climatic variations

This study investigates the connection between sediment aggradation, erosion and climate in a desert environment of the Majes valley, southern Peru. Luminescence dating of terraces and fans shows that sediment aggradation correlates with wet time intervals on the Altiplano, suggesting a climatic influence on the aggradation–degradation cycles. Major periods of aggradation occurred between ~110–100, ~60–50 and 12–8 ka. More precipitation in the Majes catchment resulted in increased erosion and transportation of sediment from the hillslopes into the trunk river. As a result, the sediment loads exceeded the transport capacity of the Majes River and aggradation started in the lower reaches where the river gradient is less. Depletion of the hillslope sediment reservoirs caused a relative increase in the capacity of the trunk river to entrain and transport sediment, resulting in erosion of the previously deposited sediment. Consequently, although climate change may initiate a phase of sediment accumulation, degradation can be triggered by an autocyclic negative feedback and does not have to be driven by climatic change.     

Carbon and Oxygen Isotopic Composition of Surface‐Sediment Carbonate in Bosten Lake (Xinjiang,China) and its Controlling Factors

Bosten Lake is a mid-latitude lake with water mainly supplied by melting ice and snow in the Tianshan Mountains. The depositional environment of the lake is spatially not uniform due to the proximity of the major inlet and the single outlet in the western part of the lake. The analytical results show that the carbon and oxygen isotopic composition of recent lake sediments is related to this specific lacustrine depositional environment and to the resulting carbonate mineralogy. In the southwestern lake region between the Kaidu River inlet and the Kongqi River outlet, carbon isotope composition (δ13C) values of the carbonate sediment (?1‰ to ?2‰) have no relation to the oxygen isotope composition of the carbonate (δ18O) values (?7‰ to ?8‰), with both isotopes showing a low variability. The carbonate content is low (<20%). Carbonate minerals analyzed by X-ray diffraction are mainly composed of calcite, while aragonite was not recorded. The salinity of the lake water is low in the estuary region as a result of the Kaidu River inflow. In comparison, the carbon and oxygen isotope values are higher in the middle and eastern parts of the lake, with δ13C values between approximately +0.5‰ and +3‰, and δ18O values between ?1‰ and ?5‰. There is a moderate correlation between the stable oxygen and carbon isotopes, with a coefficient of correlation r of approximately 0.63. This implies that the lake water has a relatively short residence time. Carbonate minerals constitute calcite and aragonite in the middle and eastern region of the lake. Aragonite and Mg–calcite are formed at higher lake water salinity and temperatures, and larger evaporation effects. More saline lake water in the middle and eastern region of the lake and the enhanced isotopic equilibrium between water and atmospheric CO2 cause the correlating carbon and oxygen isotope values determined for aragonite and Mg–calcite. Evaporation and biological processes are the main reasons for the salinity and carbonate mineralogy influence of the surface-sediment carbonate in Bosten Lake. The lake water residence time and the CO2 exchange between the atmosphere and the water body control the carbon and oxygen isotope composition of the carbonate sediment. In addition, organic matter pollution and decomposition result in the abnormally low carbon isotope values of the lake surface-sediment carbonate.     

Inter-annual water mass variations from GRACE in central Siberia

Our study analyses satellite and land-based observations of the Yakutsk region centred at the Lena watershed, an area characterised mainly by continuous permafrost. Using monthly solutions of the Gravity Recovery And Climate Experiment satellite mission, we detect a mass increase over central Siberia from 2002 to 2007 which reverses into a mass decrease between 2007 and 2011. No significant mass trend is visible for the whole observation period. To further quantify this behaviour, different mass signal components are studied in detail: (1) inter-annual variation in the atmospheric mass, (2) a possible effect of glacial isostatic adjustment (GIA), and (3) hydrological mass variations. In standard processing the atmospheric mass signal is reduced based on the data from numerical weather prediction models. We use surface pressure observations in order to validate this atmospheric reduction. On inter-annual time scale the difference between the atmospheric mass signal from model prediction and from surface pressure observation is $<$ 4 mm in equivalent water height. The effect of GIA on the mass signal over Siberia is calculated using a global ice model and a spherically symmetric, compressible, Maxwell-viscoelastic earth model. The calculation shows that for the investigated area any effect of GIA can be ruled out. Hence, the main part of the signal can be attributed to hydrological mass variations. We briefly discuss potential hydrological effects such as changes in precipitation, river discharge, surface and subsurface water storage.     

River Seepage Conductance in Large‐Scale Regional Studies

Flow exchange between surface and groundwater is of great importance be it for beneficial allocation and use of water resources or for the proper exercise of water rights. In large‐scale regional studies, most numerical models use coarse grid sizes, which make it difficult to provide an accurate depiction of the phenomenon. In particular, a somewhat arbitrary leakance coefficient in a third type (i.e., Cauchy, General Head) boundary condition is used to calculate the seepage discharge as a function of the difference of head in the river and in the aquifer, whose value is often found by calibration. A different approach is presented to analytically estimate that leakance coefficient. It is shown that a simple equivalence can be deduced from the analytical solution for the empirical coefficient, so that it provides the accuracy of the analytical solution while the model maintains a very coarse grid, treating the water‐table aquifer as a single calculation layer. Relating the empirical leakance coefficient to the exact conductance, derived from physical principles, provides a physical basis for the leakance coefficient. Factors such as normalized wetted perimeter, degree of penetration of the river, presence of a clogging layer, and anisotropy can be included with little computational demand. In addition the river coefficient in models such as MODFLOW, for example, can be easily modified when grid size is changed without need for recalibration.     

Predictive modelling of dump water impact on the surroundings of the lignite dump site Jänschwalde (Eastern Germany)

Open cast mining of lignite leads to dumps containing highly mineralised pore waters. To predict the impact of the dump waters on the undisturbed aquifers two steps are necessary. (1) The prediction of dump water quality at times when steady state flow conditions will be established. (2) The simulation of the dump ground water migration with a model that is able to handle the complexity of the homogeneous and heterogeneous interactions of the migration process.For the investigated site Jänschwalde, which is still dewatered, a chemical mass balance was performed. The predicted alkalinity potentials exceed acidity potentials for the dump as a whole. The distribution of these parameters show high alkalinity potentials for the northern part.In order to model the migration process the transport code PCGEOFIM^® [Anwenderdokumentaion, IBGW Leipzig, (in German)] was coupled with the geochemical equilibrium code PHREEQC [USGS, Water-Resources Investigations Report]. This was done to simulate redox reactions, mineral dissolution and precipitation, and cation exchange in the ground water zone. The model is verified by a column flow test. The results of the simulations show a small effect of the migrating dump waters on the quartenary aquifer with respect to acidity changes. This results from calcite buffering and cation exchange. The impact on the quartenary aquifer by sulphate is much higher.     

Grenzen quantitativer Untersuchungen bei tektonischen Experimenten

Quantitative experimental and theoretical investigations, except basic research, should focus only to such parameters which can be measured in the field. This is shown by three examples.

1. A model of a discontinuum composed of particles, between which friction occurs during shear is presented. Even at simple shear external and internal stresses are in equilibrium; no rigid body rotation occurs. The theory is examinated experimentally.
2. In deformation experiments with clay and sand a development of anisotropy is observed, which can cause shear fractures. The orientation of the normal stress directions can be discovered from the shear sets, their angular distribution, and the rotation of the individual blocks.
3. Most folds can be traced back to the following three types, a) Similar folds, b) concentric folds, and c) box folds. b) and c) occur only near the surface and near shear planes, as shown by experiments and field observations. In all other cases the more energy-consuming similar folds are formed. Kink bands are presumably transitional between folds and shear fractures.