The Colider and Roosevelt Volcanic rocks (sw amazonian craton): geochemistry and sm-nd isotope characteristics of a silicic large igneous province

The volcanic rocks of the Colíder and Roosevelt formations are extensively exposed in the south-central portion of the Amazonian Craton where effusive and pyroclastic rocks have been mapped. Both units, topped by chemical sediments and oceanic facies as rhyolite and andesite lavas, rhyodacite, and porphyritic dacite, with frequent intercalations of pyroclastic and epiclastic deposits. Whole-rock geochemistry for 55 samples of rhyolitic to andesitic composition suggests the involvement of fertile mantle-derived components with E-MORB to OIB compositions. The analyzed rocks display calc-alkaline to shoshonitic affinity consistent with generation related to an active continental margin. The whole-rock Sm-Nd isotope data from selected felsic volcanic rocks of the Colíder and Roosevelt formations yield negative initial ε_Nd values between –3 and –9, indicating the predominantly crustal nature of the parental magmas with early Archean to late Paleoproterozoic (ca. 2.5–2.0 Ga) depleted mantle model ages.

     

Single-particle crushing strength under different relative humidity conditions

This paper presents a fundamental study on the effect of the relative humidity on the rockfill crushing strength. This aspect plays an important role in the mechanical behaviour of rockfill, and it is known that certain characteristics of the granular materials, such as compressibility and shear strength, depend on the confining stress, which is a function of the particles crushing. An increased interest has been observed regarding the effect of the relative humidity in the mechanical behaviour of rockfill. Unfortunately, limited research has been conducted until now regarding the study of individual particle crushing. Therefore, this paper thoroughly investigated particle crushing, by performing single-particle crushing tests on rockfill particles divided into four size ranges, under different relative humidity conditions. The experimental results reveal a considerable influence of the relative humidity in the studied rockfill particles, whose strength of the particles with the greatest dimensions in saturated conditions was reduced by half. Consistent macro-mechanical evidence demonstrates that particle’s size and relative humidity conditions depict the most important factors that influence particle crushing strength.

     

Access routes to high mountain huts facing climate-induced environmental changes and adaptive strategies in the Western Alps since the 1990s

ABSTRACT

In the European Alps, high mountain environments are subject to major impacts resulting from climate change, which strongly affect human activities such as mountaineering. The purpose of the study was to examine changes in access routes to 30 high mountain huts in the Western Alps since the 1990s. Data were derived from the use of two different methods, geo-historical studies and a questionnaire, and were used to identify both the climate-related processes affecting the climbing routes and the strategies implemented by public entities, Alpine clubs, guide companies, and hut keepers to maintain acceptable safety and technical conditions. The case studies revealed issues affecting three access routes and the results from the questionnaire showed that the main processes affecting access routes were loss of ice thickness and retreat from the front of the glaciated areas. Commonly, in situ equipment was installed to facilitate access for mountaineers and/or a part of a route was relocated to a safer area. The authors conclude that in most cases, the measures were effective but they were limited by financial, ethical and legal issues, especially in protected or classified areas that could jeopardise their durability and effectiveness.     

A Review on Marine N2 Fixation: Mechanism,Evolution of Methodologies,Rates, and Future Concerns

Ocean Science Journal - Investigations on marine N2 fixation have gained momentum since 1960s with eventual establishments of relevant methodologies to identify species involved and quantify the...     

Holocene and Eemian climatic optima in the Korean Peninsula based on textural and carbon isotopic records from the stalagmite of the Daeya Cave,South Korea

Textural and stable isotopic records from the absolute-dated stalagmite of the Daeya Cave (DY-1) provide new insights into the climatic evolution of the Korean Peninsula during the Holocene and Eemian climatic optima. The stalagmite yielded ages of 8572 ± 227 to 5907 ± 158 and 1,23,456 ± 535 to 1,19,837 ± 1089 years, which coincide with the Holocene and Eemian climatic optima, respectively. The stalagmite’s δ¹³C record closely resembles previously reported Chinese speleothem δ¹⁸O data. Thus it can be suggested that textural and geochemical results of the DY-1 reflect East Asian monsoon intensity, which is forced by summer insolation patterns in the northern hemisphere. Lighter carbon isotopic compositions, well-developed fibrous calcite crystals, and their relatively faster growth rate in the stalagmite sample are interpreted to reflect the warmest and wettest climate conditions of the Holocene and Eemian interglacials. Both climatic optima took place when insolation was decreasing from its maximum level, temperature in Greenland was highest, and sea level approached its maximum level. These climatic optima also coincide with decreasing Antarctic temperatures. Compared the DY-1 data to other proxies, it is suggested that the Holocene and Eemian climatic optima developed through a balance among boreal insolation, monsoon intensity, and sea level (also continental ice volume), which are the main climatic forcing factors in the northern hemisphere. These trends also follow the bi-polar seesaw mechanism as previously described.     

Test of the vibrational modelling for the λ-type transitions: Application to the α-β quartz transition

Vibrational modelling is at the present time the only known way to predict the heat capacities of the Earth's mantle minerals at high-pressure and high-temperature. To test the validity of this method for λ-type transitions, we have applied it to the α-β quartz transition (T ₀=846±1 K). Raman spectra of quartz were recorded up to 900 K. Measured frequency shifts of the α-quartz Raman modes were then used in conjunction with available high-pressure Raman data to calculate intrinsic mode anharmonicity, through the parameter a _i=(?Lnv_i/?T)_v. Vibrational modelling of the heat capacity at constant volume, Cv, and at constant pressure, Cp, including anharmonic corrections deduced from the a _i parameters, are compared to experimental data. Taking into account the soft-mode associated to the α-β quartz transition, the model reproduces the excess of Cp related to the transition. Then, this study confirms that detecting a soft-mode from vibrational data allows one to predict λ-type transitions. However, when modelling the thermodynamic properties, the contribution of a soft-mode cannot be established from spectroscopic data. Therefore, one needs first to determine this contribution in order to predict the heat capacities of Earth's mantle minerals displaying λ-type transitions. In α-quartz, this contribution has been determined as 0.007% of the total number of the optic modes in the model of the density of states.     

U-Pb dating of an early paleozoic bimodal magmatism in the french Massif Central and of its further metamorphic evolution

In the Marvejols area (Southern french Massif Central), the gneissic Marvejols supergroup is overthrust on the metasedimentary “Série du Lot”, deposited in part prior to 540 Ma. The allochtonous terranes are characterized by the occurrence of a leptyno-amphibolitic group, a complex association of mafic and felsic rocks of igneous and sedimentary derivation. A 480±10 Ma age has been obtained by U-Pb dating of zircons, for the crystallization of both mafic and felsic meta-igneous rocks. These rocks were emplaced during an important extensional tectonics. Relics of eclogites, pyrigarnites, coronite gabbros and HP-trondhjemites are clear evidence for a further HP-HT event dated at 415±6 Ma on zircons from a HP trondhjemite. Subsequently, the Marvejols supergroup underwent an amphibolite facies metamorphism with incipient mobilization dated at 345±10 Ma. Rifting and thinning of the continental crust in Cambro-Ordovician times appears to be a major geodynamic feature which could account for the thermal events often referred to the “Caledonian” orogeny. The Silurian (415 Ma) age of the HP episode is clearly older than the main Variscan tectonometamorphic event; it is in agreement with Rb-Sr dating of the Moldanubian granulites and with some radiometric data from Southern Brittany (France). These results point to a compressive phase, probably in a subduction context, in view of the high pressures reached (15–20 Kb), after the Cambro-Ordovician distensive phase. The main final tectono-metamorphic paroxysm (blocking of subduction process and continental collison ?) is not prior to the end of Devonian (340–350 Ma) and is related to the Variscan orogeny s.s     

Identification of regions enriched or depleted in radioelements through nondistributional analysis of aerial radiometric data

Throughout the aerial radiometric reconnaissance survey portion of the U.S. Department of Energy's National Uranium Resource Evaluation (NURE) program, the identification of outliers (anomalies) was an important approach to locating regions with radio-element concentrations that are either higher or lower than expected. The method introduced herein to locate such regions involves three steps: selection of a high (or low) threshold for the variate of interest; use of the sample percentile to identify all points of interest; and movement of a window over the selected data to locate significant clusters of observations. These steps, applied to aerial radiometric ²¹⁴Bi (equivalent uranium) data collected over the Copper Mountain area in Wyoming, resulted in the identification of areas enriched in that variate.     

Stable isotope (C,O, S) systematics of the mercury mineralization at Idrija,Slovenia: constraints on fluid source and alteration processes

The world-class Idrija mercury deposit (western Slovenia) is hosted by highly deformed Permocarboniferous to Middle Triassic sedimentary rocks within a complex tectonic structure at the transition between the External Dinarides and the Southern Alps. Concordant and discordant mineralization formed concomitant with Middle Triassic bimodal volcanism in an aborted rift. A multiple isotopic (C, O, S) investigation of host rocks and ore minerals was performed to put constraints on the source and composition of the fluid, and the hydrothermal alteration. The distributions of the ¹³C and ¹⁸O values of host and gangue carbonates are indicative of a fracture-controlled hydrothermal system, with locally high fluid-rock ratios. Quantitative modeling of the ¹³C and ¹⁸O covariation for host carbonates during temperature dependent fluid-rock interaction, and concomitant precipitation of void-filling dolomites points to a slightly acidic hydrothermal fluid (¹³C–4 and ¹⁸O+10), which most likely evolved during isotopic exchange with carbonates under low fluid/rock ratios. The ³⁴S values of hydrothermal and sedimentary sulfur minerals were used to re-evaluate the previously proposed magmatic and evaporitic sulfur sources for the mineralization, and to assess the importance of other possible sulfur sources such as the contemporaneous seawater sulfate, sedimentary pyrite, and organic sulfur compounds. The ³⁴S values of the sulfides show a large variation at deposit down to hand-specimen scale. They range for cinnabar and pyrite from –19.1 to +22.8, and from –22.4 to +59.6, respectively, suggesting mixing of sulfur from different sources. The peak of ³⁴S values of cinnabar and pyrite close to 0 is compatible with ore sulfur derived dominantly from a magmatic fluid and/or from hydrothermal leaching of basement rocks. The similar stratigraphic trends of the ³⁴S values of both cinnabar and pyrite suggest a minor contribution of sedimentary sulfur (pyrite and organic sulfur) to the ore formation. Some of the positive ³⁴S values are probably derived from thermochemical reduction of evaporitic and contemporaneous seawater sulfates.Editorial handling: P. Lattanzi