Habitable zones and UV habitable zones around host stars

Ultraviolet radiation is a double-edged sword to life. If it is too strong, the terrestrial biological systems will be damaged. And if it is too weak, the synthesis of many biochemical compounds cannot go along. We try to obtain the continuous ultraviolet habitable zones, and compare the ultraviolet habitable zones with the habitable zones of host stars. Using the boundary ultraviolet radiation of ultraviolet habitable zone, we calculate the ultraviolet habitable zones of host stars with masses from 0.08 to 4.00 M _⊙. For the host stars with effective temperatures lower than 4,600 K, the ultraviolet habitable zones are closer than the habitable zones. For the host stars with effective temperatures higher than 7,137 K, the ultraviolet habitable zones are farther than the habitable zones. For a hot subdwarf as a host star, the distance of the ultraviolet habitable zone is about ten times more than that of the habitable zone, which is not suitable for the existence of life.     

Evaluation of the intermediate-term periodicities in solar and cosmic ray activities during cycle 23

In this paper we investigate the presence and temporal evolution of galactic cosmic rays (GCRs) time-series and three solar parameters, namely the daily sunspot number, the coronal green line and the 10.7 cm solar radio flux over the period 1996–2003 by the wavelet technique. A number of short- and intermediate-term quasi-periodicities were also detected in both GCR and solar parameters. For the short-term range, we have identified quasi-periods of 16–30 days, 40–55 days, 60–70 days, 80–90 days and 80–100 days. In the case of intermediate range, the significant periods were 120–140 days, 150–170 days, 190–210 days, 240–260 days, ≈1.09 yr. and ≈1.23 yr. The wavelet power spectra show that all the above-mentioned periods are intermittent in nature and occurred in different time-series in different intervals. The result exhibits that the well-known “Rieger period” of (150–160 days) was prominent in both GCR and solar data sets during the ascending phase of cycle 23. Possible reasons behind the observed periods were discussed with the help of previous results and existing numerical models.     

On the pair-instability supernovae and gamma-ray burst phenomenon

We present a model of a gamma-ray burst (GRB) related to “very massive” stars. In the framework of our model, the GRB phenomenon is a result of helium burning in degenerate conditions in a massive star (≳130 M _⊙), in which the thermal nuclear burning occurs in the deflagration regime and has a pulsating temporal pattern. The shock runs away from the burning (reaction) zone, which leads to the development of a coronal outflow (jet-like) structure. In our scenario the GRB observable prompt fast rise and decay part can be a result of photon propagation through the hot corona (Comptonization photosphere) of the star. On the other hand, the GRB afterglow is a cooling phase of the expanding and outflowing envelope. Presumably, the X-ray part of the GRB emergent spectrum is formed due to upscattering of soft photons of outer layers of the star off hot coronal electrons, and thus it should have a specific shape of the Comptonization spectrum.     

Effects of copper pollution on the activity of soil invertase and urease in loquat orchards

Dealt with in this paper is the relationship between Cu contents of soil and activity parameters for soil invertase and urease from the Changtai loquat orchards in Fujian Province. The soil invertase activity and maximum reaction velocity (enzyme kinetic parameters: Vmax and Vmax/Km) have no remarkable negative correlation with Cu concentrations, but Cu concentrations have an obvious positive effect on invertase Kin, indicating a reversible com-petitive restraint on the reaction between Cu and invertase. The soil urease activity and maximum reaction velocity (Vmax,Vmax/Km) have a remarkable negative correlation with Cu concentrations, and in this aspect, they can be used as ecological indices of the soil polluted by Cu. A slightly variable Km indicates the non-reversible competitive restraint level.     

Relationship between the variation of water quality in rivers and the characteristics of watershed at Miyun,Beijing, China

Based on the characteristics of land use and drainage network of the upper watershed of the Miyun Res-ervoir, Beijing, 26 monitoring and sampling sites were selected in different sub-catchments. Temporal and spatial variations in nutrient loss were dealt with in this paper in terms of the monitoring data on the water quality of the main tributaries flowing into the Miyun Reservoir. In combination with the monitoring data on water quality, the impacts of watershed characteristics including land-use type, landscape pattern, and drainage density were assessed, The concentrations of nutrients in the rainy season are higher than those in other seasons, and the concentrations of NO3--N are linearly related to those of total N which is the main form of nitrogen present in the fiver water. The concentrations of nitrogen become higher toward the reservoir along the main rivers. The seasonal variation of ni-trogen in the watershed affected by intensive human activities is very obvious; in the watershed with steady or low water flow, the seasonal variation of nitrogen is less obvious. Forest land and grassland can trap and filter nitrogen effectively. Land-use pattern also has important impacts on the loss of nitrogen. The concentrations of nitrogen and phosphorus in the water bodies show great temporal and spatial variations. On a temporal scale, the concentrations of TN and TP in the rainy reason are higher than those in other seasons. On a spatial scale, the concentrations of TN and NO3--N in the Qingshui River and Chaohe River are highest all the time. The spatial variation of TP is distinct, being obvious at sampling sites near villages. The form of nitrogen and phosphorus loss varies in different hydrological seasons. Dissolved nitrogen and phosphorus are the main forms in streams in non-rainy seasons, the dissolved nitro-gen and total nitrogen decrease in percentage in the rainy season. Particulate nitrogen and phosphorus are the main forms in some rivers. The concentrations of TN and NO3--N from orchards and villages are high whereas those from forest land are lowest. Land-use pattern has impacts on TN and NO3--N losses, at the sampling sites near the source landscape, the concentrations are higher than those at the sampling sites near the sink landscape. Water quality of the rivers which flow into the Miyuan Reservior is influenced by the composition of adjacent soils.     

Pan-African high-grade metamorphism of southern Sinai,Egypt, fluid inclusion evidence

Fluid inclusions in the leucosomes of Wadi Feiran migmatites showed that CO ₂ , H₂O and (H₂O-CO₂) fluids were likely to have been present when partial melting began in these rocks. Low salinity, aqueous fluid, to a lesser extent, CO₂-rich fluids are the most abundant fluids. The present study suggests that high-density CO₂ inclusions were formed at the earliest stage, while H₂O inclusions were formed at the late stage. In an intermediate stage, low-density CO₂ and H₂O, CO₂ inclusions were formed. At the early stage of uplift and during melt crystallization, the CO₂-bearing vapour was trapped at grain boundaries. At the late stage of uplift, H₂O released at the time of crystallization of the melt was trapped as inclusions.     

THE CORRESPONDING ANALYSIS OF HEAVY-METAL POLLUTION OF SOIL IN ZHUZHOU CITY

ＴＨＥ ＣＯＲＲＥＳＰＯＮＤＩＮＧ ＡＮＡＬＹＳＩＳ ＯＦ ＨＥＡＶＹ－ＭＥＴＡＬ ＰＯＬＬＵＴＩＯＮ ＯＦ ＳＯＩＬ ＩＮ ＺＨＵＺＨＯＵ ＣＩＴＹ ＳｈａｎｇＪｉｎｃｈｅｎｇ（尚金城）；ＬｏｎｇＡｉｍｉｎ（龙爱民）ＬｉＢｉｎ（李斌）；ＪｉａｎｇＪ...     

Graph theory for analyzing pair-wise data: application to geophysical model parameters estimated from interferometric synthetic aperture radar data at Okmok volcano,Alaska

Graph theory is useful for analyzing time-dependent model parameters estimated from interferometric synthetic aperture radar (InSAR) data in the temporal domain. Plotting acquisition dates (epochs) as vertices and pair-wise interferometric combinations as edges defines an incidence graph. The edge-vertex incidence matrix and the normalized edge Laplacian matrix are factors in the covariance matrix for the pair-wise data. Using empirical measures of residual scatter in the pair-wise observations, we estimate the relative variance at each epoch by inverting the covariance of the pair-wise data. We evaluate the rank deficiency of the corresponding least-squares problem via the edge-vertex incidence matrix. We implement our method in a MATLAB software package called GraphTreeTA available on GitHub (https://github.com/feigl/gipht). We apply temporal adjustment to the data set described in Lu et al. (Geophys Res Solid Earth 110, 2005) at Okmok volcano, Alaska, which erupted most recently in 1997 and 2008. The data set contains 44 differential volumetric changes and uncertainties estimated from interferograms between 1997 and 2004. Estimates show that approximately half of the magma volume lost during the 1997 eruption was recovered by the summer of 2003. Between June 2002 and September 2003, the estimated rate of volumetric increase is \((6.2 \, \pm \, 0.6) \times 10^6~\mathrm{m}^3/\mathrm{year} \). Our preferred model provides a reasonable fit that is compatible with viscoelastic relaxation in the five years following the 1997 eruption. Although we demonstrate the approach using volumetric rates of change, our formulation in terms of incidence graphs applies to any quantity derived from pair-wise differences, such as range change, range gradient, or atmospheric delay.     

Surface-Based 3D Modeling of Geological Structures

Building a 3D geological model from field and subsurface data is a typical task in geological studies involving natural resource evaluation and hazard assessment. However, there is quite often a gap between research papers presenting case studies or specific innovations in 3D modeling and the objectives of a typical class in 3D structural modeling, as more and more is implemented at universities. In this paper, we present general procedures and guidelines to effectively build a structural model made of faults and horizons from typical sparse data. Then we describe a typical 3D structural modeling workflow based on triangulated surfaces. Our goal is not to replace software user guides, but to provide key concepts, principles, and procedures to be applied during geomodeling tasks, with a specific focus on quality control.