近百年来湖泊有机碳与无机碳埋藏响应流域开发的协同变化——以石林喀斯特地区为例

有机碳和无机碳的流域输出是湖泊碳埋藏的重要驱动因子,而喀斯特地区无机碳循环具有反应迅速且对人类活动影响敏感的特点.在流域开发持续增强的背景下,喀斯特地区湖泊有机碳和无机碳的来源、含量与埋藏通量可能会出现同步变化的协同模式.本文以云南省石林喀斯特地区流域土地利用类型不同的两个中型湖泊(长湖、月湖)开展对比分析,通过对沉积物钻孔的土壤侵蚀强度(磁化率)、流域外源输入(C:N比值)、水动力(粒度)、营养盐(总氮、总磷)、藻类生产力(叶绿素色素)等代用指标的分析,结合监测数据和历史资料重建了两个湖泊环境变化的近百年历史,并定量识别了有机碳和无机碳埋藏响应流域开发的变化特征与协同模式.沉积物磁化率和C:N比值结果揭示了流域地表侵蚀和外源输入的阶段性特征,同时总氮和总磷含量记录了长湖和月湖营养水平上升的长期模式.在流域森林覆被较高(33.43%)的长湖中,全岩和有机质C:N比值分别与磁化率信号呈显著正相关(r=0.95和0.89,P<0.001),且与无机碳和有机碳含量呈显著负相关(r=-0.94,P<0.001和r=-0.52,P=0.01),反映了森林植被退化时流域碳输出的减少对沉...     

东北地区初霜冻的天气气候特征

利用实测资料和历史天气图资料,对近３１年我国东北地区初霜冻的天气气候特征进行了分析,并探讨了初霜冻出现前２４小时的环流形势特征和天气演变过程,给出了初霜冻的时空分布特征以及对预报有用的一些判据。对实时预报业务有参考作用。     

How effective is the new generation of GPM satellite precipitation in characterizing the rainfall variability over Malaysia?

We investigated the potential of the new generation of satellite precipitation product from the Global Precipitation Mission (GPM) to characterize the rainfall in Malaysia. Most satellite precipitation products have limited ability to precisely characterize the high dynamic rainfall variation that occurred at both time and scale in this humid tropical region due to the coarse grid size to meet the physical condition of the smaller land size, sub-continent and islands. Prior to the status quo, an improved satellite precipitation was required to accurately measure the rainfall and its distribution. Subsequently, the newly released of GPM precipitation product at half-hourly and 0.1° resolution served an opportunity to anticipate the aforementioned conflict. Nevertheless, related evidence was not found and therefore, this study made an initiative to fill the gap. A total of 843 rain gauges over east (Borneo) and west Malaysia (Peninsular) were used to evaluate the rainfall the GPM rainfall data. The assessment covered all critical rainy seasons which associated with Asian Monsoon including northeast (Nov. - Feb.), southwest (May - Aug.) and their subsequent inter-monsoon period (Mar. - Apr. & Sep. - Oct.). The ability of GPM to provide quantitative rainfall estimates and qualitative spatial rainfall patterns were analysed. Our results showed that the GPM had good capacity to depict the spatial rainfall patterns in less heterogeneous rainfall patterns (Spearman’s correlation, 0.591 to 0.891) compared to the clustered one (r = 0.368 to 0.721). Rainfall intensity and spatial heterogeneity that is largely driven by seasonal monsoon has significant influence on GPM ability to resolve local rainfall patterns. In quantitative rainfall estimation, large errors can be primarily associated with the rainfall intensity increment. 77% of the error variation can be explained through rainfall intensity particularly the high intensity (> 35 mm d^-1). A strong relationship between GPM rainfall and error was found from heavy (~35 mm d^-1) to violent rain (160 mm d^-1). The output of this study provides reference regarding the performance of GPM data for respective hydrology studies in this region.     

Seasonal change in body length of important small copepods and relationship with environmental factors in Jiaozhou Bay,China

Differences among species in prosome length and in species’ response to environmental factors do exist. Therefore, it is useful to examine prosome length for different copepod species in variable environments. Seasonal variations in prosome length of four small copepods and their copepodite stages in the Jiaozhou Bay were compared and the relative influence of temperature, salinity, and chlorophyll concentration were examined. Two peaks were found in the mean prosome length of Paracalanus parvus (in early winter and May). For Acartia bifilosa, the maximum values of all copepodites occurred mainly from February to April, and decreased to the bottom in July. Prosome length of Acartia pacifica peaked when it first appeared in June, then reached to the minimum in July. Parvocalanus crassirostris only appeared from late summer to autumn and the mean prosome length showed no clear changes. Correlations of adult prosome length with environmental factors were evaluated. For the four species, temperature was negatively correlated to prosome length except for P. crassirostris. But the different species varied markedly in their responds to temperature. A. bifilosa showed a more definite trend of size variation with temperature than P. parvus and A. pacifica. Correlations of prosome length with salinity were significantly positive for almost all the small copepods. The relationship between chlorophyll concentration and prosome length was complicated for these copepods, but for P. parvus, chlorophyll concentration was also an important affecting factor. Furthermore, investigation needs to be done on food quality for some copepod. These results are essential to estimate the biomass and the production, and to understand these small copepods’ population dynamics in this human-affected bay.     

A sulfotransferase specific to N-21 of gonyautoxin 2/3 from crude enzyme extraction of toxic dinoflagellate Alexandrium tamarense CI01

Sulfotransferase (ST) is the first enzyme discovered in association with paralytic shellfish poisoning (PSP) toxin biosynthesis in toxic dinoflagellates. This study investigates the ST activity in crude enzyme extraction of a toxic dinoflagellate species, Alexandrium tamarense CI01. The results show that crude enzyme can transfer a sulfate group from 3’-phosphoadenosine 5’-phosphosulfate (PAPS) to N-21 in the carbamoyl group of gonyautoxin 2/3 (GTX2/3) to produce C1/C2, but is inactive toward STX to produce GTX5. The crude enzyme is optimally active at pH 6.0 and 15°C. The activity is enhanced by Co2 , Mg2 , Mn2 and Ca2 individually, but is inhibited by Cu2 . Moreover, the activity shows no difference when various sulfur compounds are used as sulfate donors. These results demonstrate that the ST specific to GTX2/3 is present in the cells of A. tamarense CI01 and is involved in PSP toxin biosynthesis. In addition, the ST from different dinoflagellates is species-specific, which explains well the various biosynthesis pathways of the PSP toxins in toxic dinoflagellates.     

ENVIRONMENTAL CHANGES SINCE LATE PLEISTOCENE IN ESTUARINE PLAIN OF JIULONG RIVER, FUJIAN PROVINCE

TheestuarineplainoftheJiulongRiver,whichisthesecondlargestrivernexttotheMinjiangRiverinFujianPrc)vince,intervenesbetweenXi~enandZhangzhoucitiesinthesouthoftheprovince.'I'heplainconsistsofthreeparts:thenorthernplain,thesouthernPlainandZiniIsles.Withsoutllcrn--Subtr<)picoceanicm(>nasexinclimate,itdevelol>saregionalvegetationtypeofeveTgreen13r(Jad--lcav(3dfores[,ofwhicll,however,mosthasbeendestroyedbyhumanbeing.Nowaday-s.shruborgrasslandvegetationcanbeseenonthehillsintheviciTlily'ofthisarea…     

甘青地区马家窑文化彩陶贸易及其动力探讨

马家窑文化是甘青地区仰韶文化晚期阶段一个重要的文化遗存类型,其以精美的彩陶闻名于世,对于马家窑文化彩陶的交流传播研究受到了学术界的广泛关注。本文运用X-荧光光谱分析法对甘青地区5个典型马家窑文化早期阶段遗址出土的92件彩陶陶片样品和各遗址附近采集的42份红粘土及黄土样品进行化学元素组成分析,追溯彩陶的产源地及贸易。同时基于陶器的起源传播理论,收集整理马家窑文化区遗址出土的粟（Setaria italica）、黍（Panicum miliaceum）农作物以及动物骨骼遗存鉴定资料,探讨马家窑彩陶贸易的动力。Ti/Al-Na/K和主成分分析结果显示宗日文化区宗日遗址的马家窑文化彩陶元素组成特征和马家窑文化主体区域的彩陶一致,表明宗日遗址马家窑类型彩陶是从马家窑文化主体区域贸易而来;马家窑文化彩陶的传播和该地区粟黍农作物的交流传播具有时空一致性,粟黍农业人群沿黄河上游谷地向共和盆地的扩散带来了新的文化元素;宗日文化区和马家窑文化核心区生业模式的差异带来了跨区域间文化交流的动力,这也可能是马家窑文化彩陶贸易的动力。

     

景观指数的粒度变化效应

本文以延河流域的1:250000和1:500000土地利用图为对象,以景观格局分析程序Fragstats3.3为分析工具,探讨了不同比例尺条件下景观指数随粒度增加的变化特征.研究结果表明,随着粒度值由25m到400m的逐渐增加,除斑块丰富度外的景观指数均具有明显的尺度效应,其中聚集度和集合度没有尺度转折点,其他指数具有明显或不明显的尺度转折点.对比分析1:250000和1:500000土地利用格局指数的计算结果可以发现:1)尺度转折点不是一个值,而是一个相对较小的区间;2)尺度转折点与研究图件的比例尺有关,比例尺越大,所发生的第一次尺度转折点的粒度就越小;3)第一尺度域是选择适宜粒度的较好取值范围.对延河流域1:250000土地利用图进行景观指数计算的适宜粒度范围是70～90m,1:500000土地利用图的适宜粒度范围是90～120m.     

Fracture mechanics analysis of multiple cracks in anisotropic media

This paper presents a single‐domain boundary element method (BEM) for linear elastic fracture mechanics analysis in the two‐dimensional anisotropic material. In this formulation, the displacement integral equation is collocated on the un‐cracked boundary only, and the traction integral equation is collocated on one side of the crack surface only. A special crack‐tip element was introduced to capture exactly the crack‐tip behavior. A computer program with the FORTRAN language has been developed to effectively calculate the stress intensity factors of an anisotropic material. This BEM program has been verified having a good accuracy with the previous researches. Furthermore, by analyzing the different anisotropic degree cracks in a finite plate, we found that the stress intensity factors of crack tips had apparent influence by the geometry forms of cracks and media with different anisotropic degrees. Copyright © 2010 John Wiley & Sons, Ltd.