Ar/Ar thermochronology of the Kampa Dome, southern Tibet: Implications for tectonic evolution of the North Himalayan gneiss domes

Structural and thermochronological studies of the Kampa Dome provide constraints on timing and mechanisms of gneiss dome formation in southern Tibet. The core of Kampa Dome contains the Kampa Granite, a Cambrian orthogneiss that was deformed under high temperature (sub-solidus) conditions during Himalayan orogenesis. The Kampa Granite is intruded by syn-tectonic leucogranite dikes and sills of probable Oligocene to Miocene age. Overlying Paleozoic to Mesozoic metasedimentary rocks decrease in peak metamorphic grade from kyanite + staurolite grade at the base of the sequence to unmetamorphosed at the top. The Kampa Shear Zone traverses the Kampa Granite — metasediment contact and contains evidence for high-temperature to low-temperature ductile deformation and brittle faulting. The shear zone is interpreted to represent an exhumed portion of the South Tibetan Detachment System. Biotite and muscovite ⁴⁰Ar/³⁹Ar thermochronology from the metasedimentary sequence yields disturbed spectra with 14.22 ± 0.18 to 15.54 ± 0.39 Ma cooling ages and concordant spectra with 14.64 ± 0.15 to 14.68 ± 0.07 Ma cooling ages. Petrographic investigations suggest disturbed samples are associated with excess argon, intracrystalline deformation, mineral and fluid inclusions and/or chloritization that led to variations in argon systematics. We conclude that the entire metasedimentary sequence cooled rapidly through mica closure temperatures at  14.6 Ma. The Kampa Granite yields the youngest biotite ⁴⁰Ar/³⁹Ar ages of  13.7 Ma immediately below the granite–metasediment contact. We suggest that this age variation reflects either varying mica closure temperatures, re-heating of the Kampa Granite biotites above closure temperatures between 14.6 Ma and 13.7 Ma, or juxtaposition of rocks with different thermal histories. Our data do not corroborate the “inverse” mica cooling gradient observed in adjacent North Himalayan gneiss domes. Instead, we infer that mica cooling occurred in response to exhumation and conduction related to top-to-north normal faulting in the overlying sequence, top-to-south thrusting at depth, and coeval surface denudation.     

Geochemistry of oceanic carbonatites compared with continental carbonatites: mantle recycling of oceanic crustal carbonate

Major and trace element and Sr-Nd-Pb-O-C isotopic compositions are presented for carbonatites from the Cape Verde (Brava, Fogo, Sáo Tiago, Maio and Sáo Vicente) and Canary (Fuerteventura) Islands. Carbonatites show pronounced enrichment in Ba, Th, REE, Sr and Pb in comparison to most silicate volcanic rocks and relative depletion in Ti, Zr, Hf, K and Rb. Calcio (calcitic)-carbonatites have primary (mantle-like) stable isotopic compositions and radiogenic isotopic compositions similar to HIMU-type ocean island basalts. Cape Verde carbonatites, however, have more radiogenic Pb isotope ratios (e.g. ²⁰⁶Pb/²⁰⁴Pb=19.3-20.4) than reported for silicate volcanic rocks from these islands (18.7-19.9; Gerlach et al. 1988; Kokfelt 1998). We interpret calcio-carbonatites to be derived from the melting of recycled carbonated oceanic crust (eclogite) with a recycling age of ~1.6 Ga. Because of the degree of recrystallization, replacement of calcite by secondary dolomite and elevated ‘¹³C and ‘¹⁸O, the major and trace element compositions of the magnesio (dolomitic)-carbonatites are likely to reflect secondary processes. Compared with Cape Verde calcio-carbonatites, the less radiogenic Nd and Pb isotopic ratios and the negative Ɨ/4 of the magnesio-carbonatites (also observed in silicate volcanic rocks from the Canary and Cape Verde Islands) cannot be explained through secondary processes or through the assimilation of Cape Verde crust. These isotopic characteristics require the involvement of a mantle component that has thus far only been found in the Smoky Butte lamproites from Montana, which are believed to be derived from subcontinental lithospheric sources. Continental carbonatites show much greater variation in radiogenic isotopic composition than oceanic carbonatites, requiring a HIMU-like component similar to that observed in the oceanic carbonatites and enriched components. We interpret the enriched components to be Phanerozoic through Proterozoic marine carbonate (e.g. limestone) recycled through shallow, subcontinental-lithospheric-mantle and deep, lower-mantle sources.     

Brine-pool deposition for the Zn–Pb–Cu massive sulphide deposits of the Bathurst mining camp, New Brunswick, Canada. II. Ocean anoxia during mineralisation

Current models of massive sulphide ore genesis in the Bathurst mining camp, New Brunswick, involve settling of sulphide particles from a stagnating, low-salinity hydrothermal plume spreading laterally in an anoxic ocean layer with minimal sulphate content. There is fragmentary evidence of ocean anoxia in the form of local fine lamination in the shales that host some of the deposits but the total organic carbon, S, Fe, U/Th, Ni/Co, V/Ni and V/Cr relationships indicate deposition under oxic or dysoxic conditions. Vanadium and Mn values range from oxic to anoxic and sulphate-reducing to non-sulphate reducing but Mn may be anomalously low due to derivation by erosion of acidic volcanic rocks. The somewhat equivocal physical and chemical data, combined with the likely disturbing effects of penecontemporaneous volcanism, considerably weaken the case for an anoxic bottom layer in a static ocean. The presence of barite with ambient seawater ³⁴S values in Brunswick no. 12 ore, and the abundance of sulphate in modern euxinic basin waters, make a sulphate-free layer unlikely, even if anoxic. Sulphate-bearing, low-salinity fluids mixing with seawater would lead to growth of barite-bearing chimneys and baritic rubble mounds, which are not observed. A model involving brine-pool deposition better explains the major features of the Bathurst ores.     

Fluid geochemistry of the Methana Peninsula and Loutraki geothermal area,Greece

A geochemical survey on the thermal fluids released by the volcanic/geothermal system of Methana Peninsula and Loutraki area was undertaken.     

The upper cenozoic evolution of the Duero and Ebro fluvial systems (N-Spain): part I. paleogeography; part II. geomorphology

Lack of age dates in the terrigenous Cenozoic sediments of the Duero and the Ebro sedimentary basins has complicated tecto-stratic correlation across the two basins. We tentatively synthesize a range of existing studies and new data to construct a rough general paleogeography throughout Upper Cenozoic times. The more extensive erosion of the Ebro has been previously attributed to the earlier moment of opening. We tentatively analyse lithostratic data to conclude that the lower knick-point and different lithologies have also contributed to the deeper erosion in the Ebro Basin. We conclude from lithostratic data and field evidence that the W half of the Rioja was part of the Duero in earlier times and that the escarpment retreated westward through the Rioja in four subsequent episodes of erosion. The tilt of the NW Duero is a consequence of isostatic rebound to this erosion.     

Value of Information Introduced by a Resource Model Updating Framework

A primary concern of the mining industry is to meet production targets, which are required and defined by customers. Deviations from these targets, in terms of quality and quantity, highly affect the economical aspect. Recently, an efficient resource model updating framework concept has been proposed aiming for the improvement of raw material quality control and process efficiency in any type of mining operation. The concept integrates online sensor measurements, obtained during production, into the resource model. In this way, due to the spatial variability, quality attributes of the blocks that will be produced in the next days or weeks are being updated based on real-time measurements. The concept has been applied in a lignite field with the aim of identifying local impurities in a lignite seam and to improve the prediction of coal quality attributes in neighbouring blocks. This paper investigates the added value of using the resource model updating framework by using the value of information analysis. The expected benefit of additional information (integration of the online sensor measurements into the resource model) is compared to a case where there is no additional information integrated into the process. These benefits are evaluated based on the economic impact determined by applying the resource model updating framework in mine planning.

     

Denudation,vertical crustal movements and sedimentary basin infill

Denudation and vertical crustal movements are linked through the isostatic equation for conservation of lithospheric mass. Recent empirical results from a wide range of sources are presented on the rates of these processes. Denudation alone can cause non-tectonic (isostatic) surface uplift of the right magnitude predicted by theory. A case is made, following Ahnert, for a single linear relationship (although with much scatter) between denudation rate and mean drainage basin relief for large basins. Some recent determinations of denudational time constants have neglected to include tectonic and isostatic terms which oppose the reduction of relief by denudation. Application of diffusional transport models to determine the rate of sediment deposition are severely limited by inherent one-dimensionality and neglect of suspended and washload contributions. Basin infill sequences may be used to determine past sediment transfer coefficients from a hinterland, but problems arise in the apportionment of the various hinterland fluxes that occur in »real-world« three dimensional basins. Sediment yields in smaller half-graben and growth fold basins must reflect the magnitude of drainage basins and the complex local controls upon sediment yields. Examples are given from extensional basins in the Western USA and Greece. The »length« of tectonic relief produced in tilt blocks and growth folds will control the area of drainage basin developed (through the fractal form of Hack's Law) and hence the magnitude of deposition in sedimentary basins adjoining tectonic uplands.

---

Zusammenfassung Denudation und vertikale Krustenbewegungen sind verbunden durch das isostatische Gesetz über den Erhalt der lithosphärischen Masse. Neuerliche empirische Ergebnisse aus einem weiten Quellenbereich werden im Verhältnis zu diesen Prozessen präsentiert. Denudation allein, kann nicht tektonisch bedingte (isostatische) Oberflächenhebungen hervorrufen, die in der richtigen Größenordnung liegen, wie sie auch theoretisch ermittelt wurden. Es wird in Anlehnung an Ahnert ein Fall geschaffen, in der eine einfach lineare Beziehung (obgleich mit vielen Streuungen) zwischen der Denudationsrate und dem durchschnittlichen Abflußbeckenrelief für große Becken vorliegt. Einige neue Ermittlungen der Denudationszeitkonstanten wurden vernachlässigt, um tektonische und isostatische Begriffe einzufügen, welche sich der Verringerung des Reliefs durch Denudation widersetzen. Die Anwendung des Verbreitungstransportmodells zum Bestimmen der Sedimentationsrate sind streng begrenzt durch die ihm innewohnende Eindimensionalität, und der Vernachlässigung der Schwebe- und Schwämmfrachtbeteiligung. Bekkenfüllungssequenzen können benutzt werden um vergangene Sedimenttransferkoeffizienten aus dem Hinterland festzulegen; aber es treten auch Probleme bei der Verteilung der verschiedenen Hinterlandeinträge auf, die bei einem realen dreidimensionalen Becken vorhanden sind. Sedimenteinträge in kleineren Halbgräben und Growth-fold Becken müssen die Größe des Abflußbeckens widerspiegeln, sowie die komplexen lokalen Steuerungen auf die Sedimenteinträge. Beispiele von Dehnungsbecken aus dem Westen der USA und Griechenlands werden angesprochen. Die Länge des tektonischen Reliefs in verkippten Blöcken und Growth-Folds wird die Fläche des entwickelten Abflußbeckens kontrollieren (durch die fraktale Form des Gesetzes von Hack), und daher die Ablagerungsmenge von Sedimentbecken in der Nähe von tektonischen Hochlagen.

---

Résumé L'érosion et les mouvements crustaux verticaux sont liés par l'équation isostatique de conservation de la masse lithosphérique. Des résultats empiriques récents provenant d'un large éventail de sources sont présentés en relation avec ces processus. L'érosion seule peut être la cause d'une montée non tectonique (isostatique) dont l'ampleur est prévue exactement par la théorie. Un cas est présenté, d'après Ahnert, qui montre, pour de grands bassins, une relation linéaire simple (mais avec une forte dispersion des points) entre le taux de dénudation et le relief moyen de l'aire de drainage. Certaines déterminations récentes des constantes de temps de dénudation ont omis de tenir compte des termes tectonique et isostatique qui s'opposent à la destruction du relief par érosion. L'utilisation de modèles de transport diffus en vue de déterminer le taux d'accumulation des sédiments est sévèrement limitée par le caractère unidimensionnel de tels modèles et par le fait qu'il ne tiennent pas compte de la fraction en suspension. Les séquences de comblement d'un bassin sédimentaire peuvent être utilisées pour déterminer les anciens cfficients de transfert à partir de l'hinterland; mais des difficultés surgissent à propos de la répartition des différents flux en provenance de l'hinterland dans le cas réel d'un bassin à 3 dimensions. Les apports sédimentaires dans les bassins de demi-graben et de »growth-fold« doivent traduire la grandeur des aires de drainage et les facteurs locaux complexes qui régissent ces apports. Des exemples sont présentés, relatifs à des bassins d'extension de l'ouest des USA et de Grèce. La »longueur« des reliefs tectoniques en relation avec les blocs basculés et les »growth-folds« déterminent, par la forme fractale de la loi de Hack, la surface des aires de drainage ainsi engendrées et, en conséquence, l'importance des dépôts dans les bassins sédimentaires voisins des reliefs tectoniques.

---

. , . () , . , ( ) . , , , . , . , , ; , . « » (GrowthFolds) . . — « » Hack'a , , .

     

Lithogeochemical localisation of disseminated gold in the White River area, Yukon, Canada

Gold mineralisation in the White River area, 80 km south of the highly productive Klondike alluvial goldfield, is hosted in amphibolite facies gneisses in the same Permian metamorphic pile as the basement for the Klondike goldfield. Hydrothermal fluid which introduced the gold was controlled by fracture systems associated with middle Cretaceous to early Tertiary extensional faults. Gold deposition occurred where highly fractured and chemically reactive rocks allowed intense water–rock interaction and hydrothermal alteration, with only minor development of quartz veins. Felsic gneisses were sericitised with recrystallisation of hematite and minor arsenic mobility, and extensively pyritised zones contain gold and minor arsenic (ca 10 ppm). Graphitic quartzites (up to 5 wt.% carbon) caused chemical reduction of mineralising fluids, with associated recrystallisation of metamorphic minerals (graphite, pyrrhotite, pyrite, chalcopyrite) in host rocks and veins, and introduction of arsenic (up to 1 wt.%) to form arsenopyrite in veins and disseminated through host rock. Veins have little or no hydrothermal quartz, and up to 19 wt.% carbon as graphite. Late-stage oxidation of arsenopyrite in some graphitic veins has formed pharmacosiderite. Gold is closely associated with disseminated and vein sulphides in these two rock types, with grades of up to 3 ppm on the metre scale. Other rock types in the White River basement rocks, including biotite gneiss, hornblende gneiss, pyroxenite, and serpentinite, have not developed through-going fracture systems because of their individual mineralogical and rheological characteristics, and hence have been little hydrothermally altered themselves, have little hydrothermal gold, and have restricted flow of fluids through the rock mass. Some small post-metamorphic quartz veins (metre scale) have been intensely fractured and contain abundant gold on fractures (up to 40 ppm), but these are volumetrically minor. The style of gold mineralisation in the White River area is younger than, and distinctly different from, that of the Klondike area. Some of the mineralised zones in the White River area resemble, mineralogically and geochemically, nearby coeval igneous-hosted gold deposits, but this resemblance is superficial only. The White River mineralisation is an entirely new style of Yukon gold deposit, in which host rocks control the mineralogy and geochemistry of disseminated gold, without quartz veins.     

A COMPARISON OF EASTERN AND WESTERN HONG KONG PHYTOPLANKTON FROM WEEKLY SAMPLES (1997-1999)

ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｍａｉｎｐｕｒｐｏｓｅｏｆｔｈｉｓｓｔｕｄｙｗａｓｔｏｄｅｔｅｒｍｉｎｅｔｈｅｍａｇｎｉｔｕｄｅａｎｄｆｒｅｑｕｅｎｃｙｏｆｈａｒｍｆｕｌｄｉａｔｏｍａｎｄｄｉｎｏｆｌａｇｅｌｌａｔｅｏｕｔｂｒｅａｋｓｉｎＨｏｎｇＫｏｎｇ’ｓｗｅｓｔｅｒｎａｎｄｅａｓｔｅｒｎｗａｔｅｒｓ (ｅ .ｇ.ＬａｍｍａＳｔｒａｉｔｓａｎｄＰｏｒｔＳｈｅｌｔｅｒｒｅｓｐｅｃｔｉｖｅｌｙ)ｆｏｒｔｈｅｐｅｒｉｏｄＪａｎｕａｒｙ 1 997ｔｏＤｅｃｅｍｂｅｒ1 999.Ｔｈｉｓｗａｓｄｏｎｅｉｎｏｒｄｅｒｔｏｄ…