Heat capacity, entropy, and magnetic properties of jarosite-group compounds

Jarosite phases are common minerals in acidic, sulfate-rich environments. Here, we report heat capacities (C _p) and standard entropies (S°) for a number of jarosite samples. Most samples are close to the nominal composition AFe₃(SO₄)₂(OH)₆, where A = K, Na, Rb, and NH₄. One of the samples has a significant number of defects on the Fe sites and is called the defect jarosite; others are referred to as A-jarosite. The samples, their compositions, and the entropies at T = 298.15 K are:

Ag-rich Tetrahedrite in the El Zancudo Deposit,Colombia: Occurrence,Chemical Compositions and Genetic Temperatures

Chemical compositions of tetrahedrite—Ag-rich tetrahedrite—freibergite solid solutions (Ag-rich tetrahedrite_ss) and homogenization temperatures of fluid inclusions in quartz and carbonates of seventeen samples from nine veins in the El Zancudo deposit, Antioquia, Colombia, were investigated to reveal the origin of silver in Ag-rich tetrahedrite_ss, to derive their crystallization temperatures and to examine the relationship between chemical compositions of Ag-rich tetrahedrite_ss and their crystallization temperatures. The ores consist of arsenopyrite, pyrite, sphalerite, Ag-rich tetrahedrite_ss, galena, boulangerite, andorite, owyheeite, diaphorite, jamesonite, miargyrite, bournonite, chalcopyrite, and electrum. Ag-rich tetrahedrite_ss forms about 10 volume % of the total ores and is one of the most common and widely distributed sulfosalts in this deposit. Ag-rich tetrahedrite_ss is rich in Ag (1.13 to 31.02 wt%) and Sb (22.93 to 29.82 wt%), and poor in As (0.06 to 2.43 wt%), consistent with the reported incompatibilities of Ag and As in Ag-rich tetrahedrite_ss. The Zn/(Zn + Fe)-, Ag/(Ag + Cu)- and Sb/(Sb + As + Bi)-atomic ratios exhibit some variations among the veins. Ag-rich tetrahedrite_ss with higher Ag/(Ag + Cu) ratios coexist with diaphorite, whereas those with lower ratios are not associated with this sulfosalt. Ag-rich tetrahedrite_ss in the assemblages of Ag-rich tetrahedrite_ss+ sphalerite and of Ag-rich tetrahedrite_ss+ bournonite + galena shows no Zn ↔ Fe and Cu ↔ Ag variations between core and rim, respectively, negating the possibility of solid state reaction during cooling. Ag-rich tetrahedrite_ss is thus regarded as primary phase. Homogenization temperatures of primary fluid inclusions in quartz and carbonates co-existing with Ag-rich tetrahedrite_ss define the mineralization temperatures of 134 to 263°C. Independent crystallization temperatures of Ag-rich tetrahedrite estimated based on Zn/(Zn + Fe) and Ag/(Ag + Cu) ratios of the Ag-rich tetrahedrite_ss associated with silver minerals such as miargyrite, andorite and diaphorite using Sack's thermochemical database lie in a range between 170 and ∼250°C. Both results are thus in good agreement.     

Linking geomorphology and hydrodynamics: a case study from Península Valdés, Patagonia, Argentina

A case study is presented to assess the relevance of geomorphology in hydrogeological phenomena in an arid coastal area in the Argentinean extra-Andean Patagonia (Península Valdés) with an average rainfall of 232 mm/year and a soil moisture deficit of about 472 mm/year. Various geomorphic units were identified by interpreting Landsat 7 satellite images processed with ER Mapper software and then surveyed in the field, as well as by geological characterization. The hydrodynamic analysis was based on a survey of 89 wells, the construction of equipotential maps, and the interpretation of pumping-test results by a non-equilibrium method. The hydrochemical characterization was based on chemical tests analyzed with the Easy_Quim 6.0 application. The combination of geomorphological, geological, hydrodynamic and hydrochemical elements allowed the definition of hydromorphological units that are typical of recharge, circulation and discharge areas, the latter both for coastal and inland areas in wetlands (salt pans) with elevations to ?40 m relative to sea level. These units and the criteria used for their definition allow immediate recognition of hydrogeological phenomena in arid regions such as the extra-Andean Patagonia, with low information density but with near-optimal satellite imaging of landforms due to the lack of vegetation cover.     

Review: Thermal water resources in carbonate rock aquifers

The current knowledge on thermal water resources in carbonate rock aquifers is presented in this review, which also discusses geochemical processes that create reservoir porosity and different types of utilisations of these resources such as thermal baths, geothermal energy and carbon dioxide (CO₂) sequestration. Carbonate aquifers probably constitute the most important thermal water resources outside of volcanic areas. Several processes contribute to the creation of porosity, summarised under the term hypogenic (or hypogene) speleogenesis, including retrograde calcite solubility, mixing corrosion induced by cross-formational flow, and dissolution by geogenic acids from deep sources. Thermal and mineral waters from karst aquifers supply spas all over the world such as the famous bath in Budapest, Hungary. Geothermal installations use these resources for electricity production, district heating or other purposes, with low CO₂ emissions and land consumption, e.g. Germany’s largest geothermal power plant at Unterhaching near Munich. Regional fault and fracture zones are often the most productive zones, but are sometimes difficult to locate, resulting in a relatively high exploration uncertainty. Geothermal installations in deep carbonate rocks could also be used for CO₂ sequestration (carbonate dissolution would partly neutralise this gas and increase reservoir porosity). The use of geothermal installations to this end should be further investigated.     

Modelling shallow landslide susceptibility: a new approach in logistic regression by using favourability assessment

A new method for estimating shallow landslide susceptibility by combining Geographical Information System (GIS), nonparametric kernel density estimation and logistic regression is described. Specifically, a logistic regression is applied to predict the spatial distribution by estimating the probability of occurrence of a landslide in a 16 km² area. For this purpose, a GIS is employed to gather the relevant sample information connected with the landslides. The advantages of pre-processing the explanatory variables by nonparametric density estimation (for continuous variables) and a reclassification (for categorical/discrete ones) are discussed. The pre-processing leads to new explanatory variables, namely, some functions which measure the favourability of occurrence of a landslide. The resulting model correctly classifies 98.55% of the inventaried landslides and 89.80% of the landscape surface without instabilities. New data about recent shallow landslides were collected in order to validate the model, and 92.20% of them are also correctly classified. The results support the methodology and the extrapolation of the model to the whole study area (278 km²) in order to obtain susceptibility maps.     

Procedure for the selection of runout model parameters from landslide back-analyses: application to the Metropolitan Area of San Salvador, El Salvador

The existing procedures for the selection of runout model parameters from back-analyses do not allow integrating different types of runout criteria and generally lack a systematic approach. A new method based on receiver operating characteristic (ROC) analyses and aimed at overcoming these limitations is herein proposed. The method consists of estimating discrete classifiers for every runout simulation associated with a set of model parameters. The set of parameters that yields the best prediction is selected using ROC metrics and space. The procedure is illustrated with the back-analyses of a rainfall-triggered debris flow that killed 300–500 people in the Metropolitan Area of San Salvador in 1982. The selected model parameters are used to estimate forward predictions for scenarios that correspond to different return periods. The proposed procedure may be useful in the assessment of areas potentially affected by landslides. In turn, this information can be used in the production or updating of land use plans and zonations, similar to that currently being carried out by the Office for Urban Planning of the Metropolitan Area of San Salvador in El Salvador.     

Anthropogenic subsidence in the Mexicali Valley,Baja California,Mexico, and slip on the Saltillo fault

Deep fluid extraction in the Cerro Prieto geothermal field (CPGF) has caused subsidence and induced slip on tectonic faults in the Mexicali Valley (Baja California, Mexico). The Mexicali Valley is located in the southern part of the Salton Trough, at the boundary between the Pacific and North American plates. The Valley is characterized by being a zone of continuous tectonic deformation, geothermal activity, and seismicity. Within the Cerro Prieto pull-apart basin, seismicity is concentrated mainly in swarms, while strong earthquakes have occurred in the Imperial and Cerro Prieto transform faults, that are the eastern and western bound of the basin. Since 1973, fluid extraction at the CPGF has influenced deformation in the area, accelerating the subsidence and causing rupture (frequently as vertical slip or creep) on the surface traces of tectonic faults. Both subsidence and fault slip are causing damage to infrastructure like roads, railroad tracks, irrigation channels, and agricultural fields. Currently, accelerated extraction in the eastern part of CPGF has shifted eastwards the area of most pronounced subsidence rate; this accelerated subsidence can be observed at the Saltillo fault, a southern branch of the Imperial fault in the Mexicali Valley. Published leveling data, together with field data from geological surveys, geotechnical instruments, and new InSAR images were used to model the observed deformation in the area in terms of fluid extraction. Since the electricity production in the CPGF is an indispensable part of Baja California economy, extraction is sure to continue and may probably increase, so that the problem of damages caused by subsidence will likely increase in the future.     

The upper cenozoic evolution of the Duero and Ebro fluvial systems (N-Spain): part I. paleogeography; part II. geomorphology

Lack of age dates in the terrigenous Cenozoic sediments of the Duero and the Ebro sedimentary basins has complicated tecto-stratic correlation across the two basins. We tentatively synthesize a range of existing studies and new data to construct a rough general paleogeography throughout Upper Cenozoic times. The more extensive erosion of the Ebro has been previously attributed to the earlier moment of opening. We tentatively analyse lithostratic data to conclude that the lower knick-point and different lithologies have also contributed to the deeper erosion in the Ebro Basin. We conclude from lithostratic data and field evidence that the W half of the Rioja was part of the Duero in earlier times and that the escarpment retreated westward through the Rioja in four subsequent episodes of erosion. The tilt of the NW Duero is a consequence of isostatic rebound to this erosion.