Groundwater contamination with arsenic and other trace elements in an area of the pampa,province of Córdoba,Argentina

A geochemical study of groundwater of the pampa in the province of Córdoba, Argentina, was performed; the area covered approximately 10,000 km².Physical-chemical parameters, dissolved solids, and seven trace elements were determined in 60 selected water samples. Systematic and accurate measurements of arsenic, flourine, and vanadium were performed for the first time. Three trace element contaminants not reported earlier were found: an important one, selenium, and two others of less known effects, uranium and molybdenum.Eighty-four percent of the water analyzed showed arsenic contents over 0.05 mg/L, maximum contaminant level established by the U.S. Environmental Protection Agency (1982). The frequency distribution of trace elements was analyzed, and its fit to the lognormal distribution was proved by means of the Pearson and Kolmogorov-Smirnov test; the geographic distribution of the seven trace elements was mapped and its correlation with the anion-cation composition of the water was studied.The maximum arsenic, fluorine, vanadium, and uranium contents were found in the western part of the area under study, in waters containing dominant alkali metals in the cation composition. Maximum selenium and antimony contents were found in the eastern part of the area, while molybdenum distribution does not show any relationship with the other two groups. In addition, the geographic distribution of the trace elements seems to be related to the subsurface structure, which has been inferred using interactive digital analysis of Landsat imagery. The movements of the subsoil have disturbed surface and subsurface drainage influencing the water salinity and trace element contents.In order to investigate the origin of the contamination, 54 loess samples were collected in wells at depths ranging from the surface down to the water table. This loess, which has a high proportion of volcanic components, mainly rhyolitic glass, exhibits a chemical composition corresponding to that of a dacite.The loess and the volcanic glass show anomalous contents of all contaminant trace elements, mainly arsenic and selenium. For this reason loess is considered the most important contamination source in the groundwater under study.     

Regional retrograde alteration of sub-greenschist facies chlorite to smectite

Dioctahedral smectite is present as a retrograde alteration product of chlorite in Permian-Triassic red slates of the Malaguide Complex in Sierra de Espuña (Betic Cordillera). Mineral assemblages and textures, illite crystallinity indices, and fluid inclusion data indicate sub-greenschist facies conditions that reached at least 180°C in the higher-grade tectonic unit of the Malaguide Complex, preceding formation of smectite. Smectite, having K as the dominant interlayer cation, occurs ubiquitously intercalated with trioctahedral chlorite as thin packets of layers and as individual layers that commonly change to chlorite along layers. Although some chlorite is typically homogeneous and trioctahedral, much chlorite shows signs of alteration and has compositions corresponding to different degrees of smectite contaimination. The incompatibility of metamorphic grade with the occurrence of smectite, the general association of chlorite and smectite, and the textural relations collectively show that dioctahedral smectite is derived through replacement of trioctahedral chlorite. Such replacement occurs on a regional basis and demonstrates that caution must be used in interpreting the occurrence of smectite in pelites as being due to prograde processes. Alteration of trioctahedral chlorite under oxidizing conditions due to introduction of phreatic water after uplift of the Betic Cordillera is proposed as the cause of formation of smectite.     

The effect of El Niño Southern Oscillation cycles on the decadal scale suspended sediment behavior of a coastal dry‐summer subtropical catchment

Rivers display temporal dependence in suspended sediment–water discharge relationships. Although most work has focused on multi‐decadal trends, river sediment behavior often displays sub‐decadal scale fluctuations that have received little attention. The objectives of this study were to identify inter‐annual to decadal scale fluctuations in the suspended sediment–discharge relationship of a dry‐summer subtropical river, infer the mechanisms behind these fluctuations, and examine the role of El Niño Southern Oscillation climate cycles. The Salinas River (California) is a moderate sized (11 000 km²), coastal dry‐summer subtropical catchment with a mean discharge (Q_mean) of 11.6 m³ s^?1. This watershed is located at the northern most extent of the Pacific coastal North America region that experiences increased storm frequency during El Niño years. Event to inter‐annual scale suspended sediment behavior in this system was known to be influenced by antecedent hydrologic conditions, whereby previous hydrologic activity regulates the suspended sediment concentration–water discharge relationship. Fine and sand suspended sediment in the lower Salinas River exhibited persistent, decadal scale periods of positive and negative discharge corrected concentrations. The decadal scale variability in suspended sediment behavior was influenced by inter‐annual to decadal scale fluctuations in hydrologic characteristics, including: elapsed time since small (~0.1 × Q_mean), and moderate (~10 × Q_mean) threshold discharge values, the number of preceding days that low/no flow occurred, and annual water yield. El Niño climatic activity was found to have little effect on decadal‐scale fluctuations in the fine suspended sediment–discharge relationship due to low or no effect on the frequency of moderate to low discharge magnitudes, annual precipitation, and water yield. However, sand concentrations generally increased in El Niño years due to the increased frequency of moderate to high magnitude discharge events, which generally increase sand supply. Copyright © 2014 John Wiley & Sons, Ltd.     

Estimation of Surface-Layer Scaling Parameters in the Unstable Boundary Layer: Implications for Orographic Flow Speed-Up

A method is proposed for estimating the surface-layer depth \((z_s)\) and the friction velocity \((u_*)\) as a function of stability (here quantified by the Obukhov length, L) over the complete range of unstable flow regimes. This method extends that developed previously for stable conditions by Argaín et al. (Boundary-Layer Meteorol 130:15–28, 2009), but uses a qualitatively different approach. The method is specifically used to calculate the fractional speed-up \((\varDelta S)\) in flow over a ridge, although it is suitable for more general boundary-layer applications. The behaviour of \(z_s \left( L\right) \) and \(u_*\left( L\right) \) as a function of L is indirectly assessed via calculation of \(\varDelta S\left( L\right) \) using the linear model of Hunt et al. (Q J R Meteorol Soc 29:16–26, 1988) and its comparison with the field measurements reported in Coppin et al. (Boundary-Layer Meteorol 69:173–199, 1994) and with numerical simulations carried out using a non-linear numerical model, FLEX. The behaviour of \(\varDelta S\) estimated from the linear model is clearly improved when \(u_*\) is calculated using the method proposed here, confirming the importance of accounting for the dependences of \(z_s\left( L \right) \) and \(u_*\left( L \right) \) on L to better represent processes in the unstable boundary layer.     

CCD surface photometry of the Seyfert 1 galaxy NGC 4151

We present CCD surface photometry of the central region of the bright Seyfert 1 galaxy NGC 4151. The observations were obtained under excellent seeing conditions (0.75 FWHM). Morphological parameters for the bulge of the galaxy are estimated from the observed broad bandV, R, andI surface brightness profiles.From the analysis of the colour maps two distinct nuclear structures emerge perpendicular to each other. One of them is elliptically elongated at PA angle 50°. This direction is close to the direction of the radio jets and coincides with the Extended Narrow Emission Line Region (ENELR). Its extension is about 7 arc sec and its colours are bluer than the surronding bulge. The second structure is smaller in extension (about 1 arc sec) and is elongated at PA130°. Its colours are redder than those of the surrounding bulge. It is suggested that this might constitute areal extension of the Broad Line Region (BLR).Paper presented at the 11th European Regional Astronomical Meetings of the IAU on New Windows to the Universe, held 3–8 July, 1989, Tenerife, Canary Islands, Spain.     

Origin of the absarokite–banakite association of the Damavand volcano (Iran): trace elements and Sr,Nd, Pb isotope constraints

The activity of the Damavand volcano (Central Alborz, northern Iran) began 1.8 Ma ago and continued up to 7 ka BP. Although the volcanic suite is clearly of shoshonitic affinity, only two petrographic types can be distinguished in the studied lavas: (1) weakly differentiated absarokites (49 < %SiO₂ < 51), scattered around the volcano but with a regional extension, (2) highly differentiated banakites (59 < %SiO₂ < 63), which form the bulk of the 4,000 m thick volcanic pile. All lavas are alkalic (3.7 < %K₂O < 5), REE and LILE-rich (e.g., 85 < La < 148 ppm; 9 < Th < 32 ppm) and show highly fractionated REE patterns (69 < La/Yb < 115) and pronounced Nb–Ta negative anomalies. The absarokites are characterised by Sr (0.7045–0.7046) and Nd (0.51266–0.51269) isotope compositions close to the Bulk Earth values, and distinct from those of the banakites (0.7047 < ⁸⁷Sr/⁸⁶Sr < 0.7049, 0.51258 < ¹⁴³Nd/¹⁴⁴Nd < 0.51262). The Pb isotope ratios are also slightly lower in the absarokites than in the banakites (18.71 < ²⁰⁶Pb/²⁰⁴Pb < 18.77, 15.62 < ²⁰⁷Pb/²⁰⁴Pb < 15.63, 38.85 < ²⁰⁸Pb/²⁰⁴Pb < 38.91, and 18.77 < ²⁰⁶Pb/²⁰⁴Pb < 18.84, 15.62 < ²⁰⁷Pb/²⁰⁴Pb < 15.64, 38.94 < ²⁰⁸Pb/²⁰⁴Pb < 39.06, respectively). Overall, there is a clear tendency towards higher Sr, Pb and lower Nd isotope ratios with increasing degree of differentiation. This study suggests that the absarokites result from a low degree of partial melting (∼5%) of a highly metasomatized mantle source, which inherited its characteristics from an old subduction setting. The initiation of volcanic activity 1.8 Ma ago results from variations in the lithospheric thermal regime, probably related to lithospheric delamination as proposed for Anatolia (Pearce et al. 1990). The banakites are mainly generated by extensive fractional crystallisation (∼70%) of the absarokitic magma, with a limited amount (a few percents) of assimilation of an old crustal component, in the form of bulk assimilation or AFC processes, which both can explain the Sr, Nd and Pb isotope data.     

Multivariate analysis of contamination in the mining district of Linares (Jaén, Spain)

Historically, a significant level of mining activity has taken place in the batholite-related metalogenic enclave of Linares (Jaén province, Spain), associated with Pb–Ag, Cu, Zn and Fe sulphides and Ba sulphate mineralization, though mining here has now been abandoned. Additionally, the area features a significant amount of urban, industrial and agricultural activities. These considerations, taken together, explain the need to assess the levels of concentration of trace elements and to determine their relationship with geogenic and anthropogenic factors. For geochemical characterisation of the soil, the region has been divided into 126 grid squares with an area of 1 km². For each grid square, 32 trace elements have been analysed. Elemental concentrations of Cu, Pb, Zn, As and Mn have been included in statistical analyses. According to the reference levels established by the Regional Government (Junta de Andalucía), soils in a large part of the study area require amendment applications. The comparison of the mean content for each grid square with the reference levels reveals a significant degree of contamination of the soil by Cu (719 mg kg⁻¹), Pb (22,964 mg kg⁻¹) and As (100 mg kg⁻¹) in those grid squares affected by metallurgic activities. By means of factor analysis, four scores have been identified which together account for 80% of the variance observed. The first score is highly correlated with the logarithms of the variables Fe, Th, La, Ti, Al, Na, K, Zr, Y, Nb, Be and Sc. It is a “natural” factor that indicates the type of soil matrix (fundamentally granites and, to a lesser degree, Triassic materials). The second score shows high correlation with the logarithms of the variables Mo, Cu, Pb, Zn, Ag, Co, Mn, As, Cd, Sb, Ba, W and Sn, and is the “metallization” factor related to the mineralization that has been exploited. The third score is mainly determined by the logarithms of the variables Sr, Ca and Mg. This is a “natural” factor that indicates a type of carbonate soil matrix (Miocene). Finally, the fourth factor groups the logarithms of the variables Ni, V and Cr, elements that are associated with the combustion of fossil fuels. Analysis of the patterns of each of the factors identified enabled achieving a global characterisation of the study area. Cluster analysis of the observations showed there to be five clusters relating to the grid squares, differentiated by lithologies and degrees of contamination. These clusters are used to determine the background of granite and to calculate the anomalous load.     

Influence of surface heterogeneities of building granite on its thermal response and its potential for the generation of thermoclasty

Surface properties, especially albedo, and aspect are widely accepted as strong influences on the surface thermal response of building stone to insolation. However, the influence that adjacent areas of stone with very different surface properties may have on the thermal response of a patch of stonework, and the ways in which spatial variation in thermal characteristics might enhance stone decay has received relatively little attention. This paper examines the differential thermal response of granite used in construction that results from the presence of dark coloured micro-granular enclaves within a leucocratic host. Surface temperatures and temperature differences between enclaves exhibiting mico-spalling, enclaves with no spalling and the surrounding stone were measured for different aspects and seasons on a 20th century building in Madrid. These data were used to calculate a number of “indices” related to short-term temperature cycling and temperature gradients that have the theoretical capability of generating irreversible deformation of the stone. These indices suggest that micro-spalling of enclaves, compared to a lack of similar decay on the host-rock, is related to their differential thermal response to insolation, most importantly the lower albedo and thermal conductivity values of the enclaves. However, these factors are not sufficient on their own to trigger spalling, and breakdown was only observed where enclaves also experienced repeated, short-term surface temperature cycling caused by, for example, temporary shading by adjacent vegetation. These rapid temperature reversals are identified as a key contributory factor to the thermally driven decay observed on some of the enclaves.     

Linking sedimentation rates and large‐scale architecture for facies prediction in nonmarine basins (Paleogene,Almazán Basin,Spain)

This article focuses on the relationships between the large‐scale stratigraphic architecture of the Almazán basin infill and the sedimentation rates (SR) calculated for precise time intervals. Our aim was to improve the understanding of the timing and causes of the architectural changes, their significance in terms of accommodation space and sediment supply and their relationship with climate and tectonics. The study area includes the Gómara fluvial fan, the main sediment transfer system of the Almazán basin during Paleogene times. Its large‐scale architecture shifted through time between a stacking pattern of low density ribbon‐like and high density sheet‐like channel fills. Laterally to the fluvial system, mudstone and evaporitic mudstone units represented evaporitic mudflats which passed laterally into palustrine/lacustrine limestone units interpreted as lakes and ponds. Stacked calcretes occurred in distal alluvial and distal floodplain settings. A magnetostratigraphy encompassing 2600 m guided by available fossil mammal biochronology has provided a temporal framework that spans the complete Paleogene infill of the basin, from Late Lutetian to Late Oligocene, filling a gap in the Cenozoic chronostratigraphy of Spanish basins. This permits to constrain the kinematics of the structures both in the basin and in its margins, and to provide the timing for the depositional sequences. These data, combined with a magnetostratigraphic map, where magnetic reversals were traced through the Gómara monocline, allow a detailed analysis of the SR variability across the fluvial system and its adjacent depositional environments. The results show that high sedimentation rates (around 30–40 cm kyr^?1) are related to fluvial environments with low density ribbon‐shaped channels, while low SR (around or below 10 cm kyr^?1) are related to high density sheet‐like channels. Laterally, mud dominated environments with high SR (15–20 cm kyr^?1) grade into palustrine/lacustrine carbonated environments with low SR (around 9 cm ky^?1). The lowest SR (about 3 cm kyr^?1) are related to the development of stacked calcrete profiles in distal floodplain and in the connection of distal alluvial and palustrine/lacustrine units.