A geostatistical protocol to optimize spatial sampling of domestic drinking water supplies in remote environments

This paper deals with the design of optimal spatial sampling of water quality variables in remote regions, where logistics are complicated and the optimization of monitoring networks may be critical to maximize the effectiveness of human and material resources. A methodology that combines the probability of exceeding some particular thresholds with a measurement of the information provided by each pair of experimental points has been introduced. This network optimization concept, where the basic unit of information is not a single spatial location but a pair of spatial locations, is used to emphasize the locations with the greatest information, which are those at the border of the phenomenon (for example contamination or a quality variable exceeding a given threshold), that is, where the variable at one of the locations in the pair is above the threshold value and the other is below the threshold. The methodology is illustrated with a case of optimizing the monitoring network by optimal selection of the subset that best describes the information provided by an exhaustive survey done at a given moment in time but which cannot be repeated systematically due to time or economic constrains.     

Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.     

How much does an extreme rainfall event cost? Material damage and relationships between insurance,rainfall, land cover and urban flooding

This research aims to understand how insurance, rainfall, land cover and urban flooding are related and how these variables influenced the material damage in the Lisbon Metropolitan Area (LMA) during the 2000–2011 period. Correlation coefficients show strong relationships between built-up areas and claims (0.94) and payouts (0.88). Despite no significant relationships being found between rainfall and the amount of material damage per event, three likelihood levels of flooding were determined for hourly rainfall. Unlike the studied period, the number of claims and their spatial distribution during the 2008 extreme rainfall event were strongly dependent on rainfall. Flooding related to the old watercourses assumed greater importance during this extreme event, recovering a more natural/ancient hydrological behaviour. In the LMA, the greatest material damage was the result of high-magnitude/low-probability rainfall events. Lower magnitude events can trigger numerous claims in heavily built-up areas, but they are hardly capable of producing large material damage.     

Field investigation of siltation at a tidal harbor: North Port of Incheon,Korea

Ocean Dynamics - To understand siltation processes within the North Port of Incheon, Korea, this study estimated the sedimentation rate and then determined the dominant mechanisms for the...     

Slopewash,surface runoff and fine-litter transport in forest and landslide scars in humid-tropical steeplands,luquillo experimental forest,Puerto Rico

Rainfall, slopewash (the erosion of soil particles), surface runoff and fine-litter transport steepland sites in the Luquillo Experimental Forest, Puerto Rico (18° 20’ N, 65° 45’ W) were measured from 1991 to 1995. Hillslopes underlain by (1) Cretaceous tuffaceous sandstone and silstone in subtropical rain (tanonuco) forest with vegetation recovering from Hurricane Hugo (1989), and (2) Tertiary quartz diorite in subtropical lower mantone wet (colorado and dwarf) forest with undisturbed forest canopy were compared to recent landslide scars. Monthly surface runoff on these very steep hillslopes (24° to 43°) was only 0·2 to 0·5 per cent of monthly rainfall. Slopewash was higher in sandy loam soils whose parent material is quartz diorite (averaging 46 g m⁻² a⁻¹) than in silty clay loam soils derived from tuffaceous sandstone and siltstone where the average was 9 g m⁻² a⁻¹. Annual slopewash of 100 to 349 g m⁻² on the surfaces of two recent, small landslide scars was measured initially but slopewash decreased to only 3 to 4 g m⁻² a⁻¹ by the end of the study. The mean annual mass of fine litter (mainly leaves and twigs) transported downslope at the forested sites ranged from 5 to 8 g m⁻² and was lower at the tabonuco forest site, where post-Hurricane Hugo recovery is still in progress. Mean annual fine-litter transport was 2·5 g m⁻² on the two landslide scars. Copyright © 1999 John Wiley & Sons, Ltd.     

A New Appraisal of Sri Lankan BB Zircon as a Reference Material for LA‐ICP‐MS U‐Pb Geochronology and Lu‐Hf Isotope Tracing

A potential zircon reference material (BB zircon) for laser ablation‐inductively coupled plasma‐mass spectrometry (LA‐ICP‐MS) U‐Pb geochronology and Hf isotope geochemistry is described. A batch of twenty zircon megacrysts (0.5–1.5 cm³) from Sri Lanka was studied. Within‐grain rare earth element (REE) compositions are largely homogeneous, albeit with some variation seen between fractured and homogeneous domains. Excluding fractured cathodoluminescence bright domains, the variation in U content for all analysed crystals ranged from 227 to 368 μg g^?1 and the average Th/U ratios were between 0.20 and 0.47. The Hf isotope composition (0.56–0.84 g/100 g Hf) is homogeneous within and between the grains – mean ¹⁷⁶Hf/¹⁷⁷Hf of 0.281674 ± 0.000018 (2s). The calculated alpha dose of 0.59 × 10¹⁸ g^?1 for a number of BB grains falls within the trend of previously studied, untreated zircon samples from Sri Lanka. Aliquots of the same crystal (analysed by ID‐TIMS in four different laboratories) gave consistent U‐Pb ages with excellent measurement reproducibility (0.1–0.4% RSD). Interlaboratory assessment (by LA‐ICP‐MS) from individual crystals returned results that are within uncertainty equivalent to the TIMS ages. Finally, we report on within‐ and between‐grain homogeneity of the oxygen isotope systematic of four BB crystals (13.16‰ VSMOW).     

Evaluation of the removal of heavy metals in a natural wetland impacted by mining activities in Mexico

This research is focused on evaluating heavy metals (Cd, Cu, Fe, Mn, Pb, and Zn) uptake and removal by Eleocharis ovata, Cyperus manimae, Typha dominguensis, and Pteridium aquilinum in a natural wetland impacted by mining activities. We analyzed heavy metals content and distribution in native plants, soils, and water of a semipermanent natural wetland in Taxco de Alarcón, Guerrero, and we also determined the physicochemical characteristics of the water. Translocation factor (TF) and bioconcentration factor (BCF) were evaluated. Results showed that physical and chemical conditions are favorable for plants development. Correlation analysis showed a good and positive relation (0.95) between Cu and Pb in soils and plants. In the analyzed matrices: Zn (0.62–2.20 mg/L) exceeded the permissible limits in water, high concentrations of Pb and Zn (26.57–525.67 and 266.67–983.33 mg/kg, respectively) were detected in the studied soils, and Pb exceeded the normal range for E. ovata and P. aquilinum in the analyzed plants. Uptake of heavy metals in the tissues of different species was found in the following order: root > leaf. Data of TF and BCF showed that E. ovata is a tolerant plant with respect to heavy metals exposure since TF value was greater than 1. This study showed that E. ovata could be considered as a bioaccumulator of heavy metals in contaminated soils.