Crustal structure, fault segmentation, and activity of the Median Tectonic Line in Shikoku, Japan

We conducted a seismic tomographic analysis to estimate the crustal structure beneath the Shikoku and Chugoku regions in Japan. The Philippine Sea slab (PHS slab) subducts continuously in a SE–NW direction beneath this region, and the crustal structure is complex. Furthermore, the Median Tectonic Line (MTL), one of the longest and most active arc-parallel fault systems in Japan (hereafter, the MTL active fault system), is located in this area, and the right-lateral strike–slip movement of this fault system is related to the oblique subduction of the PHS slab. The MTL active fault system has ruptured repeatedly during the last 10 000 years, and has high seismic potential. Our tomographic analysis clarified the heterogeneous crustal structure along the MTL active fault system. This fault system in Shikoku can be divided into two segments, an east segment and a west segment, on the basis of the velocity structure. This segmentation model is consistent with other such models that have been determined from geological and geomorphological data such as fault geometry, slip rate, and faulting history. This consistency suggests that the surface characteristics of the MTL active fault system are related to structural properties of the crust. In particular, a prominent low-velocity (low-V) zone is present in the lower crust beneath the east segment. Our tomographic images show that the lower crust structure beneath the east segment is obviously different from that of the other segment. Furthermore, this low-V zone may indicate the presence of fluid, possibly related to dehydration of the PHS slab. As the presence of fluid in the lower crust affects the activity of the fault, stress accumulation and the fault failure mechanism may differ between the two segments of the MTL active fault system.     

Provenance of Paleozoic–Mesozoic sedimentary rocks in the Inner Zone of Southwest Japan: An evaluation based on Nd model ages

Nd model ages using depleted mantle (TDM) values for the sedimentary rocks in the Inner Zone of the SW Japan and western area of Tanakura Tectonic Line in the NE Japan allow classification into five categories: 2.6–2.45, 2.3–2.05, 1.9–1.55, 1.45–1.25, and 1.2–0.85 Ga. The provenance of each terrane/belt/district is interpreted on the basis of the TDMs, ¹⁴⁷Sm / ¹⁴⁴Nd vs. ¹⁴³Nd / ¹⁴⁴Nd relation, Nd isotopic evolution of the source rocks in East China and U–Pb zircon ages. The provenance of 2.6–1.8 Ga rocks, which are reported from Hida–Oki and Renge belts and Kamiaso conglomerates, is inferred to be the Sino–Korean Craton (SKC). The 2.3–1.55 Ga rocks, mostly from Ryoke, Mino and Ashio belts, are originally related with the SKC and/or Yangtze Craton (YC). The provenances of the sedimentary rocks with 1.45–0.85 Ga, from the Suo belt, Higo and some districts in the Mino and Ashio belts, are different from the SKC and YC. Especially, the Higo with 1.2–0.85 Ga is considered as a fragment of collision zone in East China. Akiyoshi belt probably belongs to the youngest age category of 1.2–0.85 Ga.Some metasedimentary rocks from the Ryoke belt have extremely high ¹⁴⁷Sm / ¹⁴⁴Nd and ¹⁴³Nd / ¹⁴⁴Nd ratios, whose main components are probably derived from mafic igneous rocks within the Ryoke belt itself and from the adjacent Tamba belt.     

Faulting on the Anninghe fault zone, Southwest China in Late Quaternary and its movement model

The Anninghe fault is one of the significant earthquake-generating fault zones in the Southwest China. Local his-torical record shows that a M≥7 strong earthquake occurred in the year of 1536. On the basis of the detailed air-photographic interpretation and field investigation, we have acquired the following knowledge: 1 The average sinistral strike-slip rate since the Late Pleistocene is about 3~7 mm/a; 2 There is important reverse faulting along the fault zone besides the main left-lateral strike-slip motion, and the shortening rate across the Anninghe fault zone due to the reverse faulting is about 1.7~4.0 mm/a. If the Xianshuihe fault zone is simply partitioned into the Anninghe and Daliangshan faults, we can also get a slip rate of 3~7 mm/a along the Daliangshan fault zone, which is the same as that on the Anninghe fault zone. Moreover, on the basis of our field investigation and the latest knowledge concerning the active tectonics of Tibetan crust, we create a dynamic model for the Anninghe fault zone.     

Kizawa tunnel cracked on 23 October 2004 Mid-Niigata earthquake: An example of earthquake-induced damage to tunnels in active-folding zones

Earthquakes in active-folding zones often trigger long-lasting landform changes. Since an underground structure closely follows the motion of its surrounding soils and rocks even after it was damaged in an intense earthquake, experts in charge of reconstruction have to wait until they are convinced that the soils and rocks have been stabilized. Kizawa tunnel was seriously cracked during the 23 October 2004 Mid-Niigata Earthquake. The upper half of the tunnel's cross-section near the north mouth shifted about 0.5 m sideways. Since a ring-shaped cross-section of a tunnel sustains the surrounding soil pressure, this crack pattern seemed to be serious. The authors collaborated with the Nagaoka Regional Development Bureau, Niigata Prefectural Government, in investigating the causes of the damage and in conducting long-term observation of the soils and rocks. This paper summarizes some findings for rational rehabilitations through the investigations.     

A high‐T metamorphic complex derived from the high‐P Suo metamorphic complex in the Omuta district,northern Kyushu,southwest Japan

New U–Pb ages of zircons from migmatitic pelitic gneisses in the Omuta district, northern Kyushu, southwest Japan are presented. Metamorphic zonation from the Suo metamorphic complex to the gneisses suggests that the protolith of the gneisses was the Suo metamorphic complex. The zircon ages reveal the following: (i) a transformation took place from the high‐P Suo metamorphic complex to a high‐T metamorphic complex that includes the migmatitic pelitic gneisses; (ii) the detrital zircon cores in the Suo pelitic rocks have two main age components (ca 1900–1800 Ma and 250 Ma), with some of the detrital zircon cores being supplied (being reworked) from a high‐grade metamorphic source; and (iii) one metamorphic zircon rim yields 105.1 ±5.3 Ma concordant age that represents the age of the high‐T metamorphism. The high‐P to high‐T transformation of metamorphic complexes implies the seaward shift of a volcanic arc or a landward shift of the metamorphic complex from a trench to the sides of a volcanic arc in an arc–trench system during the Early Cretaceous. The Omuta district is located on the same geographical trend as the Ryoke plutono‐metamorphic complex, and our estimated age of the high‐T metamorphism is similar to that of the Ryoke plutono‐metamorphism in the Yanai district of western Chugoku. Therefore, the high‐T metamorphic complex possibly represents the western extension of the Ryoke plutono‐metamorphic complex. The protolith of the metamorphic rocks of the Ryoke plutono‐metamorphic complex was the Jurassic accretionary complex of the inner zone of southwest Japan. The high‐P to high‐T transformation in the Omuta district also suggests that the geographic trend of the Jurassic accretionary complex was oblique to that of the mid‐Cretaceous high‐T metamorphic field.     

Reconstruction of subsurface DIC and alkalinity fields in the North Pacific using assimilation of upper ocean data

The subsurface water beneath the summer mixed layer is important to air–sea carbon flux, while its geochemical properties are not frequently observed. A data assimilation method is applied to determine the geochemical fields in the subsurface (i.e., 100 m) from the data collected at the surface in the North Pacific. This method, in the family of the inverse methods, is constructed on a one-dimensional bulk mixed layer model. In addition to temperature and salinity, dissolved inorganic carbon (DIC) and alkalinity are also considered as model variables, whereas biological productivity is omitted. The geochemical properties increase from the fall to the winter, which is the period simulated by the model, as the mixed layer develops and entrains subsurface water rich in DIC and alkalinity. Consequently, the geochemical fields in the mixed layer must have extremely sharp north–south gradients in the western region of the North Pacific and can be reproduced only by enhancing the north–south gradients in the subsurface. The fields reconstructed by the data assimilation provide useful information about the biogeochemical cycles. It is suggested that the large difference in DIC between the surface and the subsurface in the northwestern region is produced by transporting DIC from the mixed layer to the subsurface in the summer, implying extremely high biological productivity. Furthermore, it is suggested that high DIC in the ambient water is maintained by the upwelling of lower layer water.     

Roles of Physical Processes in the Carbon Cycle Using a Simplified Physical Model

A simplified physical model is proposed in this article to describe differences among basins in substance distributions which were not well described by previous simplified models. In the proposed model, the global ocean is divided into the Pacific/Indian Ocean (PI), the Atlantic Ocean (AT), the Southern Ocean and the Greenland/Iceland/Norwegian Sea. The model is consisted of five physical parameters, namely the air-sea gas exchange, the thermohaline circulation, the horizontal and vertical diffusions, and the deep convection in the high-latitude regions. Individual values of these parameters are chosen by optimizing model distribution of natural ¹⁴C as a physical tracer. The optimal value for a coefficient of vertical diffusion in the low-latitude region is 7.5 × 10^–5 [m²s^–1]. Vertical transports by the Antarctic Bottom Water and the North Atlantic Deep Water are estimated at 1.0 Sv and 9.0 Sv. Global-mean air-sea gas exchange time is calculated at 9.0 years. Using these optimal values, vertical profiles of dissolved inorganic carbon without biological production in PI and AT are estimated. Oceanic responses to anthropogenic fluctuations in substance concentrations in the atmosphere induced by the industrialization and nuclear bomb are also discribed, i.e., the effects appear significantly in AT while a signal is extremely weak in PI. A time-delay term is effective to make the PI water older near the bottom boundary.     

Toward development of the 4Dvar data assimilation system in the Bering Sea： reconstruction of the mean dynamic ocean topography

The Bering Sea circulation is derived as a variational inverse of hydrographic profiles（ temperature and salinity） , atmospheric climatologies and historical observation of ocean curents. The important result of this study is estimate of the mean climatological sea surface height （SSH） that can be used as a reference for satellite altimetry sea level anomaly data in the Bering Sea region. Numerical experiments reveal that, when combined with satellite altimetry, the obtained reference SSH effectively constrains a realistic reconstruction of the Amukta Pass circulation.