Light Curve Modelling and Evolutionary Status of the Short Period Binary 1SWASP J092328.76+435044

Light curve modeling for the newly discovered super contact low-mass WUMa system 1SWASPJ092328.76+435044 was carried out by using a new BVR complete light curves. A spotted model was applied to treat the asymmetry of the light curves. The output model was obtained by means of Wilson–Devinney code, which reveals that the massive component is hotter than the less massive one with about ΔT ～ 40 K. A total of six new times of minima were estimated. The evolutionary state of the system components was investigated based on the estimated physical parameters.     

Sediment infiltration traps: their use to monitor salmonid spawning habitat in headwater tributaries of the Cascapédia River,Québec

Sediment infiltration can clog salmon nests and reduce egg survival. As a countermeasure, environmental managers often deploy infiltration traps to monitor sediment infiltration. Traps provide a repeatable means of measuring infiltration and enable comparisons to be made between sites. Results from infiltration rates measured with traps have also been used to estimate infilling rates into salmon nests. Application of these data is questionable, as the composition of the bed and the amount of fine sediment within the bed is known to affect infiltration rates. Thus, infiltration rates measured with infiltration traps may differ from the infiltration rates occurring in redd and riffle gravels. To examine how relationships between sediment infiltration rates varied between four watersheds, we continuously monitored suspended sediment transport, shear stress and infiltration rates at four sites over 5 months. We also compared infiltration rates measured with infiltration traps with changes in the hydraulic conductivity and subsurface grain size distribution of adjacent artificially constructed salmon nests and natural riffle gravels. Among the four watersheds, clear differences in sediment infiltration rates were observed. The differences correlated with the subsurface silt content but no strong relationship existed between land‐use or basin physiography/geology. Despite observing an average of 30 kg m⁻² of sediment finer than 2 mm being deposited in the infiltration traps during the study, no change in redd or riffle substrate was observed. If the deposition rates measured with the traps reflect the processes in redds, enough sediment would have been deposited to inhibit egg emergence. However, no reduction in egg survival to the eyed stage was observed. In summary, our results show that infiltration traps with clean gravels can be used to detect intersite differences in sediment transport regimes. Extrapolations of sediment infiltration rates measured with such collectors to estimate infiltration rates in redds or riffles is, however, flawed. Copyright © 2005 John Wiley & Sons, Ltd.     

Daily variability of river concentrations and fluxes: indicators based on the segmentation of the rating curve

The variability of water chemistry on a daily scale is rarely addressed due to the lack of records. Appropriate tools, such as typologies and dimensionless indicators, which permit comparisons between stations and between river materials, are missing. Such tools are developed here for daily concentrations (C), specific fluxes or yields (Y) and specific river flow (q). The data set includes 128 long‐term daily records, for suspended particulate matter (SPM), total dissolved solids (TDS), dissolved and total nutrients, totalling 1236 years of records. These 86 river basins (10³–10⁶ km²) cover a wide range of environmental conditions in semi‐arid and temperate regions. The segmentation—truncation of C–q rating curves into two parts at median flows (q₅₀) generates two exponents (b_50inf and b_50sup) that are different for 66% of the analysed rating curves. After segmentation, the analysis of records results in the definition of nine major C–q types combining concentrating, diluting or stable patterns, showing inflexions, chevron and U shapes. SPM and TDS are preferentially distributed among a few types, while dissolved and total nutrients are more widely distributed. Four dimensionless indicators of daily variability combine median (C₅₀, Y₅₀), extreme (C₉₉, Y₉₉) and flow‐weighted (C*, Y*) concentrations and yields (e.g. C₉₉/C₅₀, Y*/Y₅₀). They vary over two to four orders of magnitude in the analysed records, discriminating stations and river material. A second set of four indicators of relative variability [e.g. (Y*/Y₅₀)/(q*/q₅₀)], takes into account the daily flow variability, as expressed by q*/q₅₀ and q₉₉/q₅₀, which also vary over multiple orders of magnitude. The truncated exponent b_50sup is used to describe fluxes at higher flows accounting for 75% (TDS) to 97% (SPM) of interannual fluxes. It ranges from ? 0·61 to + 1·86 in the database. It can be regarded as the key amplificator (positive b_50sup) or reductor (negative b_50sup) of concentrations or yields variability. C₅₀, Y₅₀, b_50sup can also be estimated in discrete surveys, which provides a new perspective for quantifying and mapping water quality variability at daily scale. Copyright © 2011 John Wiley & Sons, Ltd.     

Test of the vibrational modelling for the λ-type transitions: Application to the α-β quartz transition

Vibrational modelling is at the present time the only known way to predict the heat capacities of the Earth's mantle minerals at high-pressure and high-temperature. To test the validity of this method for λ-type transitions, we have applied it to the α-β quartz transition (T ₀=846±1 K). Raman spectra of quartz were recorded up to 900 K. Measured frequency shifts of the α-quartz Raman modes were then used in conjunction with available high-pressure Raman data to calculate intrinsic mode anharmonicity, through the parameter a _i=(?Lnv_i/?T)_v. Vibrational modelling of the heat capacity at constant volume, Cv, and at constant pressure, Cp, including anharmonic corrections deduced from the a _i parameters, are compared to experimental data. Taking into account the soft-mode associated to the α-β quartz transition, the model reproduces the excess of Cp related to the transition. Then, this study confirms that detecting a soft-mode from vibrational data allows one to predict λ-type transitions. However, when modelling the thermodynamic properties, the contribution of a soft-mode cannot be established from spectroscopic data. Therefore, one needs first to determine this contribution in order to predict the heat capacities of Earth's mantle minerals displaying λ-type transitions. In α-quartz, this contribution has been determined as 0.007% of the total number of the optic modes in the model of the density of states.     

Geothermobarometry in albite-garnet orthogneisses: A case study from the Gran Paradiso nappe (Western Alps)

The aim of this paper is to estimate syntectonic P-T conditions within albite- and garnet-bearing orthogneisses. These rocks are generally characterized by the assemblage quartz + albite + biotite + phengite + CaFe-garnet + epidote + titanite. Garnet contains up to 55 mole per cent of grossular. K-feldspar is a relict magmatic phase.

P-T conditions are estimated using several independent methods. First, it is shown that exchange reactions based on the Fe---Mg partitioning between garnet and biotite or garnet and phengite cannot be used to estimate temperatures in these rocks, due to the high grossular content of garnet. Second, maximum and minimum pressures are constrained, respectively, by the occurrence of albite instead of jadeite + quartz and by the assemblage phengite + biotite + quartz. Third, phase equilibria in albite- and garnet-bearing metagranites are modelled in the system K₂O---CaO---FeO---Al₂O₃---SiO₂---H₂O. Equilibrium curves are calculated for the observed phase compositions. Uncertainties in P-T estimates mainly result from the choice of appropriate non-ideal solution models for the garnet.

An application is developed for granites from the Gran Paradiso nappe (Western Alps). These granites show an heterogeneous deformation of Alpine age expressed by mylonitic shear zones cutting across weakly deformed domains. Estimated P-T conditions for the synkinematic assemblages are 10–16 kbar at 550±50°C.     

Phase transformations and inherited lattice preferred orientations: implications for seismic properties

In phase transitions via either the martensitic (diffusionless shear) or nucleation and growth mechanism a specific orientation relationship may exist between the two phases. In cases where the orientation relationship is known, the lattice preferred orientation (LPO) inherited by the new phase may be calculated from the LPO of the old phase. The method of calculation is presented in a form suitable for the spherical harmonic method of texture analysis using the orientation distribution function (ODF). Examples are presented for the -β-quartz, calcite-aragonite, orthopyroxene-clinopyroxene and olivine-spinel transformations.

The seismic properties of the transformed and untransformed phases are calculated from the ODF and the single crystal elastic constants. In particular the -β quartz transformation is considered in detail. The quartz polycrystal is very anisotropic in the alpha field (V_p anisotropy coefficient, A = 8.1%) and almost isotropic in the β-field (A = 2.1%). The transition is accompanied by V_p velocity increase of 0.6 km/s. In the other example discussed, olivine-β-spinel, there is also a decrease in V_p anisotropy coefficient from 11.1% (olivine) to 4.0% (β-spinel). The estimate of the volume fraction of olivine at the 400 km discontinuity (associated with this phase transition) is shown to depend on the direction of wave propagation.     

Calculated mineral equilibria in the greenschist-blueschist-eclogite facies in Na2O−FeO−MgO−Al2O3−SiO2−H2O

The new, greatly expanded internally-consistent dataset of Holland and Powell includes thermodynamic data for a wide range of mineral end-members in common rock-forming minerals, in particular, including FeMg_-1 substitutions in glaucophane, garnet, chloritoid and carpholite, and FeMg_-1 and MgSiAl_-1Al_-1 substitutions in talc and chlorite. Moreover, we have the uncertainties and correlations for these data. With the data, we have calculated the full pressure-temperature phase diagram for the system Na₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O (NFMASH) for quartz (or coesite) and H₂O in excess, in the range 300°–800°C and 5–50 kbars. By solving the set of non-linear equations formed by the equilibrium relationships for an independent set of equations between the end-members in an assemblage in NFMASH, the compositions of the minerals (and PT) can be calculated. Thus the changes in MgSiAl_-1Al_-1 along NMASH reactions, and FeSiAl_-1Al_-1 along NFASH reactions, are calculated, and the changes in FeMg_-1 and MgSiAl_-1Al_-1 along NFMASH reactions are calculated. From this information it is straightforward to generate PT diagrams for specific rock compositions. Mineral assemblages and mineral compositional changes in the phase diagram are discussed in relation to greenschist, blueschist and eclogite facies assemblages in metapelitic rocks. It is found that the correspondence between the predictions of the phase diagrams and the observations on rocks is remarkably good. When semiquantitative extensions of the phase diagram to include Ca(MgFe)_-1, NaSiCa_-1Al_-1, Fe³⁺Al_-1 and KNa_-1 substitutions are taken into account the agreement is essentially complete.