Late Cenozoic geodynamic evolution of eastern Indonesia

This paper presents an internally and globally consistent model of plate evolution in eastern Indonesia from Middle Miocene to Present time. It is centered on the Banda Sea region located in the triple junction area between the Pacific–Philippine, Australia and South–East Asia plates. The geological and geophysical data available from Indonesia were until recently insufficient to define a unique plate tectonic model. In this paper, the new data taken into account clearly restrict the possible interpretations. Owing to a great number of geological, geophysical and geochemical studies, the major plate boundaries (the Sunda–Banda subduction zone to the south, the Tarera–Aiduna Fault zone and the Seram Thrust to the east, and the Sorong Fault zone and Molucca Sea collision zone to the north) are now clearly identified. The age of the major tectonic structures is also better known. Geodetic measurements well constrain the Present time plate kinematics. We also consider the deformation history within eastern Indonesia, where numerous short-lived microplates and their related microcontinents successively accreted to the Asiatic margin. Moreover, magnetic anomalies identification of the North and South Banda Sea basins allows a precise kinematic reconstruction of the back-arc opening. We used the Plates software to test the coherency of our model, presented as a series of 4 plate reconstruction maps from 13 Ma to the present. Finally, the origin of oceanic domains restored by our reconstruction is discussed.     

Mount Etna eruptions of the last 2,750 years: revised chronology and location through archeomagnetic and <Superscript>226</Superscript>Ra-<Superscript>230</Superscript>Th dating

A careful re-examination of the well-known written documents pertaining to the 2,750-year-long historical period of Mount Etna was carried out and their interpretation checked through the high-accuracy archeomagnetic method (>1,200 large samples), combined with the ²²⁶Ra-²³⁰Th radiochronology. The magnetic dating is based upon secular variation of the direction of the geomagnetic field (DGF) and estimated to reach a precision of  ±40 years for the last 1,200 years, and ±100 to 200 years up to circa 150 B.C. Although less precise, the ²²⁶Ra-²³⁰Th method provides a unique tool for distinguishing between historic and prehistoric lavas, which in some cases might have similar DGFs. We show that despite the abundance of details on ancient historical eruptions, the primary sources of information are often too imprecise to identify their lava flows and eruptive systems. Most of the ages of these lavas, which are today accepted on the geological maps and catalogues, were attributed in the 1800s on the basis of their morphology and without any stratigraphical control. In fact, we found that 80% of the “historically dated” flows and cones prior to the 1700s are usually several hundreds of years older than recorded, the discrepancies sometimes exceeding a millennium. This is proper the case for volcanics presumed of the “1651 east” (actually ∼1020), “1595” (actually two distinct flows, respectively, ∼1200 and ∼1060), “1566” (∼1180), “1536” (two branches dated ∼1250 and ∼950), “1444” (a branch dated ∼1270), “1408” (lower branches dated ∼450 and ∼350), “1381” (∼1160), “1329” (∼1030), “1284” (∼1450 and ∼700), “1169 or 812” (∼1000) eruptions. Conversely, well-preserved cones and flows that are undated on the maps were produced by recent eruptions that went unnoticed in historical accounts, especially during the Middle Ages. For the few eruptions that are recorded between A.D. 252 and 750 B.C., none of their presumed lava flows shows a DGF in agreement with that existing at their respective dates of occurrence, most of these flows being in fact prehistoric. The cinder cones of Monpeloso (presumed “A.D. 252”) and Mt. Gorna (“394 B.C.”), although roughly consistent magnetically and radiochronologically with their respective epochs, remain of unspecified age because of a lack of precision of the DGF reference curve at the time. It is concluded that at the time scale of the last millennia, Mount Etna does not provide evidence of a steady-state behavior. Periods of voluminous eruptions lasting 50 to 150 years (e.g., A.D. 300–450, 950–1060, 1607–1669) are followed by centuries of less productive activity, although at any time a violent outburst may occur. Such a revised history should be taken into account for eruptive models, magma output, internal plumbing of the volcano, petrological evolution, volcano mapping and civil protection.     

An inter-comparison of regional climate models for Europe: model performance in present-day climate

The analysis of possible regional climate changes over Europe as simulated by 10 regional climate models within the context of PRUDENCE requires a careful investigation of possible systematic biases in the models. The purpose of this paper is to identify how the main model systematic biases vary across the different models. Two fundamental aspects of model validation are addressed here: the ability to simulate (1) the long-term (30 or 40 years) mean climate and (2) the inter-annual variability. The analysis concentrates on near-surface air temperature and precipitation over land and focuses mainly on winter and summer. In general, there is a warm bias with respect to the CRU data set in these extreme seasons and a tendency to cold biases in the transition seasons. In winter the typical spread (standard deviation) between the models is 1 K. During summer there is generally a better agreement between observed and simulated values of inter-annual variability although there is a relatively clear signal that the modeled temperature variability is larger than suggested by observations, while precipitation variability is closer to observations. The areas with warm (cold) bias in winter generally exhibit wet (dry) biases, whereas the relationship is the reverse during summer (though much less clear, coupling warm (cold) biases with dry (wet) ones). When comparing the RCMs with their driving GCM, they generally reproduce the large-scale circulation of the GCM though in some cases there are substantial differences between regional biases in surface temperature and precipitation.     

Twenty-Five Years of "GeostandaRef Corner"

A total of twenty-five bibliographic reviews were published between 1979 and 2004 in Geostandards Newsletter, subsequently renamed Geostandards and Geoanalytical Research, which list more than 5500 papers. These cited references contain information about geochemical reference materials, analytical methods or address general issues concerning the use of reference materials (protocols for sampling, certification, or new analytical techniques). In support of emerging fields of interest in geoanalysis, frequently associated with environmental research, and reflecting the increased breadth in the topics addressed by the Journal, new reference headings were added over time, while retaining the original style and format of the review. Reference management software was used to extract information from these publications related to methods, reference materials and analytes. Major developments during these 25 years, reflecting both advances in laboratory hardware as well as shifts in research interests, can readily be seen in both the types of reference materials being studied and in nature of the new analytical protocols that were developed. These two topics were the core foci of the twenty-five reviews, though much more information might also be extracted from this extensive resource.     

Micrometeorological Measurements in a Street Canyon during the Joint ATREUS-PICADA Experiment

In order to investigate the microclimatic conditions in a street canyon, a physical model was used to conduct the Joint ATREUS-PICADA Experiment (JAPEX) in situ experimental campaign. Four lines of buildings simulated by steel containers were installed to form three parallel street canyons at 1:5 scale, with width/height aspect ratio approximately 0.40. The reference wind and atmospheric conditions were measured, as well as the flow velocity and direction in the street. Preliminary results concern street canyon ventilation and thermal effects on in-canyon airflow, and show that vortical motions appear for reference wind directions perpendicular to the street axis. The presence of adjacent rows of buildings did not appear to significantly influence the flow character within the canyon for the case of a low aspect ratio corresponding to a skimming flow regime. The flow structure was not significantly affected by the thermal effects although some slight interference occurred in the lower part of the canyon. An analysis of horizontal temperature gradients indicated that a thin boundary layer develops near the heated facade. These facts imply that the thermal effects are considerable only very close to the wall.     

Classifying airborne radiometry data with Agglomerative Hierarchical Clustering: A tool for geological mapping in context of rainforest (French Guiana)

In highly weathered environments, it is crucial that geological maps provide information concerning both the regolith and the bedrock, for societal needs, such as land-use, mineral or water resources management. Often, geologists are facing the challenge of upgrading existing maps, as relevant information concerning weathering processes and pedogenesis is currently missing. In rugged areas in particular, where access to the field is difficult, ground observations are sparsely available, and need therefore to be complemented using methods based on remotely sensed data.     

The permafrost regime in the Mackenzie Delta,Beaufort Sea region,N.W.T. and its significance to the reconstruction of the palaeoclimatic history

Observed depths to the base of the ice-bearing permafrost (!BPF) as determined from geophysical well-log and survey information in the Mackenzie Delta and offshore Beaufort Sea continental shelf show significant variation. Depths range from over 700m beneath the northeastern portion of Richards Island and the adjacent offshore region to the north, to less than 100m in the modern Mackenzie Delta and offshore Mackenzie Bay regions. Along the Tuktoyaktuk Peninsula, permafrost thicknesses exceed 600m but tend to thin to less than 100m in a southeasterly direction. The wide variation in the thickness and distribution of permafrost is due in part to differences in the subsurface deltaic lithologies and to the complexity of the past surface temperature history, exhibited, for example, by fluctuations of the mean annual ground temperature. Geological cross-sections showing variation in the Tertiary and Upper Cretaceous deltaic sequences indicate a good correlation with the permafrost distribution. In particular, where the sand and gravel units of the Iperk and Kugmallit Sequences predominate, permafrost is thick owing to the high thermal conductivities of the ice-rich sediments. Conversely, where the low thermal conductivity shales and mudstones of the Richards Sequence are present, permafrost is accordingly thinner. Numerical models of permafrost aggradation in the Mackenzie Delta region suggest that Early and Late Wisconsinan surface temperatures were of the order ?18°C. A mid-Wisconsinan rise in temperature to approximately ?8°C, similar to mean surface temperature today, is also indicated. This proposed palaeoclimate is sufficient to account for the observed maximum permafrost thicknesses in the region.     

The 1991 EUROMET micrometeorite collection at Cap-Prudhomme,Antarctica

Abstract— An inventory of 1991 EUROMET Antarctic micrometeorite (AMM) collection is presented. Fifty grams of sediments were collected by filtration of 260 tonnes of melted ice water. Four sieve fractions were obtained and material from these is available from the EUROMET group. The few hundred milligrams of the 50–100 μm fraction are the most productive ones, in which 10% of the grains are AMMs. Input for planning a 1994 expedition to collect AMMs is also invited.     

3D geologic framework models for regional hydrogeology and land-use management: a case study from a Quaternary basin of southwestern Quebec, Canada

During a regional hydrogeologic survey in the St. Lawrence Lowlands, Canada, a computer-based 3D Geologic Framework Model (GFM) was constructed to obtain a consistent representation of this typical Quaternary glaciated basin over a 1,400 km² area. Such a detailed stratigraphic reconstruction was needed because the Quaternary sediments control the recharge to the underlying regional fractured rock aquifer and also because buried granular aquifers are partly connected to the regional system. The objectives of this geomodeling effort are 1) to improve understanding of subsurface conditions above the regional aquifer and; 2) to provide a common stratigraphic framework for hydrogeologic applications. The method draws on knowledge-driven discrete modeling using gOcad, as well as standardization and quality control procedures to maximize the use of a multisource database. The resulting model represents the bedrock topography and the complex stratigraphic architecture of overlying sediments. The regional till aquitard, the marine clay aquiclude and the buried granular aquifers have been modeled with unprecedented details thus providing a well-constrained 3D hydrostratigraphic framework. The recharge zones of the rock aquifer represent about 35% of the study area. Buried granular aquifers are directly connected to the regional aquifer system over about 10% of the area. The model allows several applications such as assessing aquifer vulnerability and areal groundwater recharge rates; improving the GFM inter-operability with groundwater modeling systems would be the next logical step.

---

Resumen Se construyó un Modelo del Marco Geológico (GFM) 3D basado en computadora durante un levantamiento hidrogeológico regional en las Tierras Bajas de St. Lawrence, Canada para obtener una representación consistente de esta cuenca glaciar Cuaternaria típica en un área de 1,400 km². Se necesitó tal grado de reconstrucción estratigráfica debido a que los sedimentos Cuaternarios controlan la recarga del acuífero rocoso fracturado regional subyacente y también porque los acuíferos granulares enterrados están parcialmente conectados con el sistema regional. Los objetivos de este esfuerzo de modelizado geológico son: 1) mejorar el entendimiento de las condiciones subsuperficiales por encima del acuífero regional y; 2) aportar un marco estratigráfico común para aplicaciones hidrogeológicas. El método se basa en el conocimiento de modelizado discreto utilizando gOcad, así como también en estandarización y procedimientos de control de calidad para maximizar el uso de bancos de datos de fuentes múltiples. El modelo obtenido representa la topografía del macizo rocoso y la arquitectura de la compleja estratigrafía de los sedimentos sobreyacentes. El acuitardo regional de tillita, el acuicludo arcilloso marino y los acuíferos granulares enterrados se han modelizado con detalles sin precedentes aportando de este modo un marco hidroestratigráfico 3D bien definido. Las zonas de recarga del acuífero rocoso representan casi el 35% del área de estudio. Los acuíferos granulares enterrados están conectados directamente al sistema acuífero regional sobre aproximadamente el 10% del área. El modelo permite varias aplicaciones tal como evaluar la vulnerabilidad de acuíferos y ritmos de recarga areales de agua subterránea; el paso lógico siguiente sería mejorar la inter-operabilidad del GFM con los sistemas de modelizado de agua subterránea.

---

Résumé Dans le cadre dune étude dhydrogéologie régionale dans les basses terres du Saint-Laurent (Canada), un Modèle surfacique géologique en 3D (MSG) a été développé pour obtenir une représentation cohérente par ordinateur de ce bassin quaternaire sur une superficie de plus de 1,400 km². Une telle reconstitution stratigraphique était nécessaire en raison du contrôle quexercent les sédiments quaternaires sur la recharge de laquifère régional fracturé sous-jacent et aussi parce que les aquifères granulaires enfouis sont partiellement connectés au système régional. Les objectifs de cet effort de géomodélisation sont: 1) daméliorer la compréhension des conditions de sous-surface au-dessus de laquifère régional et; 2) de fournir un cadre stratigraphique commun à des fins de caractérisation hydrogéologique. La méthode repose sur lintégration de linterprétation géologique dans la modélisation discrète effectuée à laide du logiciel gOcad, ainsi que sur des procédures duniformisation et de contrôle de la qualité des données afin doptimiser lutilisation dune base de données multisources. Le MSG représente la topographie du roc et larchitecture stratigraphique des sédiments sus-jacents. Laquitard régional (till), laquiclude dargile marine et les aquifères granulaires ont été modélisés à un niveau de détail sans précédent, fournissant ainsi un cadre hydrostratigraphique solidement établi. Les zones de recharge de laquifère rocheux représentent environ 35% de la zone détude. Les aquifères granulaires enfouis sont connectés directement au système aquifère régional sur au moins 10% du territoire. Le MSG permet de multiples usages tels lévaluation de la vulnérabilité des aquifères et lestimation de la distribution de la recharge; la prochaine étape logique serait lamélioration de linteropérabilité avec les systèmes de modélisation numérique de lécoulement.

     

Characterising the main karst aquifers of the Alvand basin, northwest of Zagros, Iran, by a hydrogeochemical approach

The Alvand River basin, situated in the northwest of the Zagros mountain range, Iran, drains carbonate aquifers through some important karst springs. The physical, chemical and isotopic characteristics of spring water were studied for two years in order to assess the origin of groundwater and determine the factors driving the geochemical composition. Principal components analysis was used to identify the main factors controlling the water chemistry. Two groups of springs were identified: (1) low mineralisation, ion concentration, especially sulphate, low temperature, light isotope composition and high elevation of the recharge area, and (2) moderate to high mineralisation, especially sulphate, higher temperature, heavy isotope composition and low altitude of the recharge area. The main factors controlling the groundwater composition and its seasonal variations are the geology, because of the presence of evaporite formations, the elevation and the rate of karst development. In both groups, the carbonate chemistry is diagnostic of the effect of karst development. The supersaturation with respect to calcite indicates CO₂ degassing, occurring either inside the aquifer in open conduits, or at the outlet in reservoirs. The undersaturation with respect to calcite shows the existence of fast flow and short residence-time conditions inside the aquifer. A PCA analysis showed that, contrary to most developed karst systems, where dilution occurs during the wet season, leaching of the gypsum-bearing Gachsaran Formation by rainwater produced higher mineralisation.

---

Resumen La cuenca del río Alvand, situada en el noreste de la cadena montañosa Zagros drena acuíferos compuestos por carbonatos a través de manantiales kársticos. Durante dos años se estudiaron las características físicas, químicas e isotópicas del agua de manantial con el objetivo de determinar el origen del agua subterránea y de los factores que controlan su composición geoquímica. Se utililizó el análisis de componentes principales para identificar los factores principales que controlan la química del agua. Se identificaron dos grupos de mantaniales: (1) de baja mineralización, concentración de iones especialmente sulfatos, y baja temperatura, composición de isotopos livianos y elevación alta del área de recarga, y (2) mineralización moderada y alta, especialmente, sulfatos, y temperatura más alta, composición de isotopos pesados y altitud más baja del agua de recarga. Los factores principales que controlan la composición del agua subterránea y sus variaciones estacionales son la geología debido a la presencia de formaciones evaporitas, la elevación y la tasa a la que se desarrolla el karst. En ambos grupos la química de los carbonatos es un diagnóstico del efecto del desarollo de la estructura kárstica. La supersaturación con respecto a la calcita indica presencia de CO₂ que está en proceso de degasificación que ocurre dentro de acuífero en conductos abiertos o a la salida en reservorios. La subsaturación en lo referente a la calcita muestra la existencia de flujo rápido y de tiempos cortos de residencia al interior del acuífero. El análisis de componentes principales muestra que a diferencia de la mayor parte de sistemas kársticos en donde la dilución ocurre durante la temporada de lluvias, la lixiviación de la formación Gachsaran que contiene yeso a causa de lluvia produce mineralizaciones más altas.

---

Résumé Le bassin de la rivière Alvand, situé dans le nord-ouest de la chaîne de montagne Zagros, draine des aquifères carbonatés par le biais dun important réseau de sources karstiques. Les caractéristiques physiques, chimiques et isotopiques de leau provenant des sources ont été étudiées pendant deux ans afin de déterminer lorigine de leau souterraine et les facteurs responsables de sa composition chimique actuelle. Lanalyse des éléments chimiques majeurs a été utilisée pour identifier les processus qui contrôlent la composition chimique de leau. Deux groupes différents de sources ont été identifiés: (1) faible minéralisation et concentration en ions, spécialement en sulfates, faible température, composition isotopique légère et haute élévation de la zone de recharge, et (2) minéralisation moyenne à élevée, particulièrement en sulfates, température élevée, composition isotopique lourde et plus basse altitude de la zone de recharge. Les facteurs principaux qui contrôlent la composition et la variation saisonnière de leau souterraine sont la géologie, en raison de la présence dévaporites, lélévation et le taux de développement des karsts. Dans les deux groupes, la teneur en carbonates est un diagnostic de leffet du développement de la structure des karsts. La sursaturation par rapport à la calcite indique un dégazage en CO₂ qui a lieu soit à lintérieur de laquifère, dans les conduits ouverts, ou à sa sortie, dans les réservoirs. La sous-saturation par rapport à la calcite indique lexistence dun écoulement rapide et un faible temps de résidence dans laquifère. Une analyse des éléments chimiques majeurs a démontré que contrairement aux systèmes de karst les mieux développés où la dilution a lieu lors de la saison humide, le lessivage du gypse de la formation de Gachsaran par leau de pluie produit une minéralisation plus élevée.