Monte Carlo simulation of GCR neutron capture production of cosmogenic nuclides in stony meteorites and lunar surface

Abstract— A purely physical model based on a Monte Carlo simulation of galactic cosmic ray (GCR) particle interaction with meteoroids is used to investigate neutron interactions down to thermal energies. Experimental and/or evaluated excitation functions are used to calculate neutron capture production rates as a function of the size of the meteoroid and the depth below its surface. Presented are the depth profiles of cosmogenic radionuclides ³⁶Cl, ⁴¹Ca, ⁶⁰Co, ⁵⁹Ni, and ¹²⁹I for meteoroid radii from 10 cm up to 500 cm and a 2π irradiation. Effects of bulk chemical composition on n‐capture processes are studied and discussed for various chondritic and lunar compositions. The mean GCR particle flux over the last 300 ka was determined from the comparison of simulations with measured ⁴¹Ca activities in the Apollo 15 drill core. The determined value significantly differs from that obtained using equivalent models of spallation residue production.     

Production of krypton and xenon isotopes in thick stony and iron targets isotropically irradiated with 1600 MeV protons

Abstract— Two spherical targets made of gabbro with a radius of 25 cm and of steel with a radius of 10 cm were irradiated isotropically with 1600 MeV protons at the SATURNE synchrotron at Laboratoire National Saturne (LNS)/CEN Saclay, in order to simulate the production of nuclides in meteorites induced by galactic cosmic‐ray protons in space. These experiments supply depth‐dependent production rate data for a wide range of radioactive and stable isotopes in up to 28 target elements. In this paper, we report results for ⁷⁸Kr, ^80–86Kr isotopes in Rb, Sr, Y and Zr and for ¹²⁴Xe, ¹²⁶Xe, ^128–132Xe, ¹³⁴Xe, ¹³⁶Xe isotopes in Ba and La. Krypton and xenon concentrations have been measured at different depths in the spheres by using conventional mass spectrometry. Based on Monte‐Carlo techniques, theoretical production rates are calculated by folding depth‐dependent spectra of primary and secondary protons and secondary neutrons with the excitation functions of the relevant nuclear reactions. The comparison of the model calculation results with experimental data in the thick target experiments performed at LNS and previously at CERN have allowed adjustments of the poorly known excitation functions of neutron‐induced reactions. Thus, for the two experiments at SATURNE, excellent agreement is obtained between experimental and calculated production rates for most Kr and Xe isotopes in all investigated target elements. Only Xe production in Ba in the gabbro is underestimated by the calculations by ?25%. This work validates the approach of the thin‐target model calculations of cosmogenic nuclide production rates in the attempt of modeling the interaction of galactic cosmic‐ray protons with stony and iron meteorites in space as well as with lunar samples.     

Characteristics of VLF emissions manifested by their cross-spectral phase information

Natural VLF emissions received by a single antenna can be characterised at each point in the emissions' frequency-time domain by a power and a phase. Emissions received at a single point by two antennae with a fixed relative orientation in space can be similarly described by the cross-spectral power and relative phase. It is shown that the cross-spectral phase contains information on the propagation characteristics of the waves which is better utilised in wave analysis than the power. In fact, the phase information allows weak signals to be identified more readily than is possible from a power spectrogram. It also allows the recognition of waves propagating with different wave normal directions. Data from the Geos-1 electric and magnetic antennae, pre-processed by the on-board correlator, are used to study the cross-spectral characteristics of VLF hiss and chorus in the Earth's magnetosphere.     

Comparaison de catalogues de crateres lunaires

Résumé La partie systématique des différences entre les positions des cratères de plusieurs catalogues est développée en harmoniques sphériques. L'application du test en ² détermine l'ordre du développement. La méthode a été appliquée pour comparer le système de référence de Arthur avec les catalogues de Schrutka-Rechtenstamm et Gavrilov. On obtient les surfacesf (l, b) des différences systématiques de ces catalogues. La zone centrale de la face visible de la lune (± 40° en latitude et longitude) est bien déterminée, mais la zone marginale présente des différences systématiques qui peuvent atteindre le kilomètre.

---

The systematic part of the differences between positions in crater catalogues is expanded into spherical harmonics. The application of the ² test determines the highest order of the expansion. The method was applied to compare the Arthur System with the Schrutka-Rechtenstamm and Gavrilov catalogues. The surfacesf (l, b) of systematic differences from these catalogues were obtained. The central zone of the near side of the Moon (± 40° in latitude and longitude) is well determined but the marginal zone presents systematic differences that can be as large as one kilometer.

     

Polarimetry of Pluto

The polarization of Pluto has been measured for a range of solar phase angles from 0.8 to 1.8°. A mean linear polarization of 0.29 ± 0.01% (error of the mean) was found. No dependence of both the amount of polarization and position angles with rotational phase or solar phase angle could be detected. The positional angles of polarization agree with calculated position angles of the defect of illumination and are therefore parallel to the scattering plane. The observed polarization cannot be explained as resulting purely from a surface material which is similar to asteroidal surfaces. A hypothesis of polarization from a thin atmosphere, in addition to the surface polarization, is advanced.     

3D seismic study of a ductile shear zone from laboratory and petrofabric data (Saint Barthélémy Massif, Northern Pyrenees, France)

In order to constrain interpretations of seismic reflection records more effectively, the seismic properties of a middle crustal section exposed in the Saint Barthélémy Massif have been determined. The massif, transected by a 200 m thick shear zone has been systematically sampled for density measurements and modal analysis has been performed in order to define the spatial variations of physical properties. Seismic velocities ( V _p, V _S, shear wave birefringence), have been measured on five representative samples to 600 MPa and 600°C simultaneously in the three structural directions (X, Y and Z). For two samples, the experimental data have been compared with calculated values, based on petrofabric analyses. The Lattice Preferred Orientation (LPO) is determined using universal stage, electron channelling microscopy and neutron diffraction goniometry. Using the experimental and calculated velocity data, we establish a lateral homogeneous anisotropic model.     

Ice-Core Study of the Link between Sea-Salt Aerosol,Sea-Ice Cover and Climate in the Antarctic Peninsula Area

Three ice cores and a set of snow pit samples collected on James Ross Island, Antarctic Peninsula, in 1979, 1981 and 1991 have been analyzed for water stable isotope content D or ¹⁸O (isotopic temperature) and major chemical species. A reliable and detailed chronological scale has been established first for the upper 24.5 m of water equivalent (1990–1943) where various data sets can be compared, then extended down to 59.5 m of water equivalent (1847) with the aid of seasonal variations and the sulphate peak reflecting the 1883 Krakatoa volcanic eruption. At James Ross Island, sea-salt aerosol is generally produced by ice-free marine surfaces during the summer months, although some winter sea-salt events have been observed. For the upper part of the core (1990–1943), correlations (positive or negative) were calculated between isotopic temperature, chloride content (a sea-salt indicator), sea-ice extent, regional atmospheric temperature changes and atmospheric circulation. The D and chloride content correlation was then extended back to 1847, making it possible to estimate decadal sea-ice cover fluctuations over the study period. Our findings suggest that ice-core records from James Ross Island reflect the recent warming and sea-ice decrease trends observed in the Antarctic Peninsula area from the mid-1940s.     

The granite hosted gold deposit of Moulin de Chéni (Saint-Yrieix district,Massif Central,France): petrographic,structural, fluid inclusion and oxygen isotope constraints

The Moulin de Chéni orogenic gold deposit is the only granite-hosted deposit of the Saint-Yrieix district, French Massif Central. It occurs in 338±1.5 Ma-old peraluminous leucogranites and is characterized by intense microfracturing and bleaching of the granite in relation to pervasive sulfide crystallization. Formation of quartz veins and gold deposition occurred in two successive stages: an early mesozonal stage of quartz-sulfide (Fe-As-S) deposition, usually devoid of gold and a late epizonal stage of base metal and gold deposition. Both stages postdate peak metamorphism and granite intrusion. The genesis of the deposit is the result of four successive fluid events: (1) Percolation of aqueous-carbonic metamorphic fluids under an assumed lithostatic regime of 400–450 °C, at a maximum depth of 13 km; (2) Formation of the main quartz lodes with coeval K-alteration and introduction of As and S from aqueous-carbonic fluids percolating along regional faults. Arsenopyrite and pyrite deposition was linked to the alteration of Fe-silicates into K-feldspar and phengite at near-constant iron content in the bulk granite. Temperature was similar to that of the preceding stage, but pressure decreased to 100–50 MPa, suggesting rapid uplift of the basement up to 7.5 km depth; (3) The resulting extensional tectonic leads to the deposition of gold, boulangerite, galena and sphalerite in brecciated arsenopyrite and pyrite from aqueous fluids during a mixing process. Temperature and salinity decrease from 280 to 140 °C and 8.1 wt% eq. NaCl to 1.6 wt% eq. NaCl, respectively; (4) Sealing of the late fault system by barren comb quartz which precipitated from dilute meteoric aqueous fluids (1.6 wt% eq. NaCl to 0.9 wt% eq. NaCl) under hydrostatic conditions at 200–150 °C.Editorial handling: B. Lehmann