Polycyclic aromatic hydrocarbons (PAHs) in a large South American industrial coastal area (Santos Estuary, Southeastern Brazil): sources and depositional history

Located in southeastern Brazil, the Santos Estuary has the most important industrial and urban population area of South America. Since the 1950's, increased urbanization and industrialization near the estuary margins has caused the degradation of mangroves and has increased the discharge of sewage and industrial effluents. The main objectives of this work were to determine the concentrations and sources of polycyclic aromatic hydrocarbons (PAHs) in sediment cores in order to investigate the input of these substances in the last 50 years. The PAHs analyses indicated multiple sources of these compounds (oil and pyrolitic origin), basically anthropogenic contributions from biomass, coal and fossil fuels combustion. The distribution of PAHs in the cores was associated with the formation and development of Cubat?o industrial complex and the Santos harbour, waste disposal, world oil crisis and the pollution control program, which results in the decrease of organic pollutants input in this area.     

1999年土耳其Izmit Mw7.6地震的持续成核过程

实验室和理论研究表明,地震之前会出现一个渐进性的滑动不稳定阶段,在此期间,断层缓慢滑动,而后突然加速并最终导致动态破裂.本文中,我们报道了迄今记录最为完整的大地震之一,即1999年土耳其Izmit Mw7.6地震之前出现了持续时间很久的源自震源的地震信号.这种信号包含一连串的地震破裂,破裂随时间和低频地震噪声的增加而加...     

Characterization and Application of Dried Plants to Remove Heavy Metals,Nitrate, and Phosphate Ions from Industrial Wastewaters

Low cost adsorbents were prepared from dried plants for the removal of heavy metals, nitrate, and phosphate ions from industrial wastewaters. The efficiency of these adsorbents was investigated using batch adsorption technique at room temperature. The dried plant particles were characterized by N₂ at 77 K adsorption, scanning electron microscopy, energy dispersive X‐ray spectroscopy, Fourier transform infrared spectroscopy, and phytochemical screening. The adsorption experiments showed that the microparticles of the dried plants presented a good adsorption of heavy metals, phosphate, and nitrate ions from real wastewaters. This adsorption increased with increasing contact time. The equilibrium time was found to be 30 min for heavy metals and nitrate ions and 240 min for phosphate ions. After the adsorption process, the Pb(II) concentrations, as well as those of Cd(II), Cu(II), and Zn(II) were below the European drinking water norms concentrations. The percentage removal of heavy metals, nitrates, and phosphates from industrial wastewaters by dried plants was ～94% for Cd²⁺, ～92% for Cu²⁺, ～99% for Pb²⁺, ～97% for Zn²⁺, ～100% for ${\rm NO}_{{\rm 3}}^{{-} } $ and ～77% for ${\rm PO}_{{\rm 4}}^{3{-} } $ ions. It is proved that dried plants can be one alternative source for low cost absorbents to remove heavy metals, nitrate, and phosphate ions from municipal and industrial wastewaters.     

Feasibility of High Pressure Injection of Chemicals into the Subsurface for the Bioremediation of the Exxon Valdez Oil

Delivery of dissolved chemicals to bioremediate oil from the Exxon Valdez oil spill was investigated at Beach EL056C of Eleanor Island, Prince William Sound, Alaska. The delivery technique was high pressure injection (HPI) of an inert tracer, lithium, at the approximate depth of 1.0 m into the beach near the mid‐tide line. The results revealed that the maximum injection flow rate was 3.0 L/min and the associated pressure was around 196 kPa. Therefore, exceeding any of these values would probably cause failure of the injection system. The injected tracer was monitored at multiple depths of four surrounding observation wells, and the results showed that the tracer plume occupied an area of 12 m² within 24 h. The tracer plume traveled at the average speeds of 10 m/d in the seaward direction and 1.7 m/d in other directions. The rapid movement under HPI and the large diameter of influence (3.0 m) indicated that bioremediation of the Exxon Valdez oil on this beach via injection of chemicals is logistically feasible.     

Heat budget of the surface mixed layer south of Africa

ARGO hydrographic profiles, two hydrographic transects and satellite measurements of air–sea exchange parameters were used to characterize the properties and seasonal heat budget variations of the Surface Mixed Layer (SML) south of Africa. The analysis distinguishes the Subtropical domain (STZ) and the Subantarctic Zone (SAZ), Polar Frontal Zone (PFZ) and Antarctic Zone (AZ) of the Antarctic Circumpolar Current. While no Subantarctic Mode Water forms in that region, occurrences of deep SML (up to ∼450 m) are observed in the SAZ in anticyclones detached from the Agulhas Current retroflection or Agulhas Return Current. These are present latitudinally throughout the SAZ, but preferentially at longitudes 10–20° E where, according to previous results, the Subtropical Front is interrupted. Likely owing to this exchange window and to transfers at the Subantarctic Front also enhanced by the anticyclones, the SAZ shows a wide range of properties largely encroaching upon those of the neighbouring domains. Heat budget computations in each zone reveal significant meridional changes of regime. While air–sea heat fluxes dictate the heat budget seasonal variability everywhere, heat is mostly brought through lateral geostrophic advection by the Agulhas Current in the STZ, through lateral diffusion in the SAZ and through air–sea fluxes in the PFZ and AZ. The cooling contributions are by Ekman advection everywhere, lateral diffusion in the STZ (also favoured by the ∼10° breach in the Subtropical Front) and geostrophic advection in the SAZ. The latter likely reflects an eastward draining of water warmed through mixing of the subtropical eddies.     

Sampling strategy and climatic implications of tree-ring stable isotopes on the southeast Tibetan Plateau

We explore the potential of tree-ring cellulose δ¹⁸O and δ¹³C records for reconstructing climate variability in the southeast Tibetan Plateau. Our sampling strategy was designed to investigate intra and inter-tree variability, and the effects of the age of tree on δ¹⁸O variation. We show that intra-tree δ¹³C and δ¹⁸O variability is negligible, and inter-tree coherence is sufficient to build robust tree-ring δ¹⁸O or δ¹³C chronologies based on only four trees. There is no evidence of an age effect regarding δ¹⁸O, in contrast with tree-ring width. In our warm and moist sampling site, young tree δ¹³C is not clearly correlated with monthly mean meteorological data. Tree-ring δ¹⁸O appears significantly anti-correlated with summer precipitation amount, regional cloud cover, and relative humidity. Simulations conducted with the ORCHIDEE land surface model confirm the observed contribution of relative humidity to tree cellulose δ¹⁸O, and explain the weak correlation of δ¹³C with climate by the non-linear integration linked with photosynthesis. Altogether, the tree-ring cellulose δ¹⁸O is shown to be a promising proxy to reconstruct regional summer moisture variability prior to the instrumental period.     

Late Mesozoic compressional to extensional tectonics in the Yiwulüshan massif,NE China and its bearing on the evolution of the Yinshan–Yanshan orogenic belt: Part I: Structural analyses and geochronological constraints

With a cratonic nucleus, the North China Craton (NCC) experienced a complex tectonic evolution with multiphase compressional and extensional events during Mesozoic times. Along the northern part of the NCC, the Yinshan–Yanshan fold and thrust belt was a typical intraplate orogen. Jurassic and Cretaceous continental sedimentation, magmatism, widespread intraplate characterize the Yinshan–Yanshan orogenic belt. The geodynamic significance of these tectonic events is still in dispute. In the western part of the Liaoning province, the Yiwulüshan massif crops out at the eastern end of the Yinshan–Yanshan orogenic belt. The Yiwulüshan massif presents an elliptical domal shape with a NE–SW striking long axis. The structural evolution of this massif brings new insights for the understanding of the Mesozoic plutonic–tectonic history of the NCC. A multidisciplinary study involving structural geology, geochronology, Anisotropy of Magnetic Susceptibility (AMS) and gravity modeling have been carried out. The presentation of the new results splits into two parts. Part I (this paper) deals with field and laboratory structural observations, and presents the main geochronological results. The AMS, gravity modeling data will be provided in a companion paper (Part II). The early compressional deformation (D₁) corresponds to a Late Jurassic to Early Cretaceous southward thrusting. The subsequent deformation is related to the Early Cretaceous exhumation of the Yiwulüshan massif. A detailed structural analysis allows us to distinguish several deformation events (D₂, D₃, and D₄). The Cretaceous extensional structures, such as syntectonic plutons bounded by ductile normal faults, metamorphic core complexes, and half-graben basins are recognized in many places in East Asia. These new data from the Yiwulüshan massif constitute a link between Transbaikalia, Mongolia, North China and South China, indicating that NW–SE extensional Mesozoic tectonics occurred throughout the entire region.     

Quantifying bank storage of variably saturated aquifers

Numerical simulations were conducted to quantify bank storage in a variably saturated, homogenous, and anisotropic aquifer abutting a stream during rising stream stage. Seepage faces and bank slopes ranging from 1/3 to 100/3 were simulated. The initial conditions were assumed steady-state flow with water draining toward the stream. Then, the stream level rose at a constant rate to the specified elevation of the water table given by the landward boundary condition and stayed there until the system reached a new steady state. This represents a highly simplified version of a real world hydrograph. For the specific examples considered, the following conclusions can be made. The volume of surface water entering the bank increased with the rate of stream level rise, became negligible when the rate of rise was slow, and approached a positive constant when the rate was large. Also, the volume decreased with the dimensionless parameter M (the product of the anisotropy ratio and the square of the domain's aspect ratio). When M was large (>10), bank storage was small because most pore space was initially saturated with ground water due to the presence of a significant seepage face. When M was small, the seepage face became insignificant and capillarity began to play a role. The weaker the capillary effect, the easier for surface water to enter the bank. The effect of the capillary forces on the volume of surface water entering the bank was significant and could not be neglected.