Evolution microtectonique et paléo-champs de contraintes du Bassin de Vienne

Résumé

Une étude des structures cassantes permet de préciser l’évolution tectonique du Bassin de Vienne, généralement considéré comme un bassin de type « pull apart » typique. Le champ de contrainte ottnangien-carpathien (18,5-16, 5 Ma) est caractérisé par une compression NNW-SSE. Pendant le Badénien-Sannanticn (16,5-11 Ma) une zone cisaillante sénestre de direction NE-SW a été formée dans un régime en compression N-S et extension E-W. En liaison avec cette zone décrochante trois types d’extension locale conduisent à une forte subsidence dans les dépression : extension NE-SW parallèle aux accidents sénestres, extension E-W entre les décrochements et extension NW-SE au-dessus des zones décrochantes profondes. Le champ de contrainte vers la fin du Sannaticn est marqué par une compression ENE-WSW, tandis que celui du Pannonicn- récent est similaire á celui du Miocène moyen.

Une rotation de la paléocontrainte maximale horizontale, de NNW-SSE a ENE-SSW est mise en évidence pendant la période Ottnangien-Sannantien (18,5-11 Ma). Cette rotation est parallèle A celle des directions de mise en place des nappes carpathicnnes externes. L’origine des rotation est l’échappement continental des Alpes orientales et des Carpathes septentrionales vers le NE et son blocage graduel d’Ouest en Est au front des nappes carpathiennes. Après ce blocage, l’échappement a continué avec une faible intensité du Pannonien à l’Actuel. Alors que l’échappement a été initié par une compression N-S due á la collision Europe-promontoire Adriatique, le champ de contrainte à l’intérieur des blocs échappés reflète l’effet de leur blocage au front des nappes carpalhiques.     

http://www.sciencedirect.com/science/article/pii/S1674987111000855

During the last decades, several integrated studies of Tethyan Jurassic/Cretaceous boundary sections from different countries were published with the objective to indicate problems for the selection of biological, chemical or physical markers suitable for identification of the Jurassic/Cretaceous boundary e the only system boundary within the Phanerozoic still not fixed by GSSP. Drawing the boundary between the Jurassic and Cretaceous systems is a matter of global scale discussions. The problem of proposing possible J/K boundary stratotypes results from lack of a global index fossils, global sea level drop, paleogeographic changes causing development of isolated facies areas, as well as from the effect of Late Cimmerian Orogeny. This contribution summarizes and comments data on J/K boundary interval obtained from several important Tethyan sections and shows still existing problems and discrepancies in its determination.     

Evolution of basin architecture in an incipient continental rift: the Cenozoic Most Basin, Eger Graben (Central Europe)

The Oligo-Miocene Most Basin is the largest preserved sedimentary basin within the Eger Graben, the easternmost part of the European Cenozoic Rift System (ECRIS). The basin is interpreted as a part of an incipient rift system that underwent two distinct phases of extension. The first phase, characterised by NNE–SSW- to N–S-oriented horizontal extension between the end of Eocene and early Miocene, was oblique to the rift axis and caused evolution of a fault system characterised by en-échelon-arranged E–W (ENE–WSW) faults. These faults defined a number of small, shallow initial depocentres of very small subsidence rates that gradually merged during the growth and linkage of the normal fault segments. The youngest part of the basin fill indicates accelerated subsidence caused probably by the concentration of displacement at several major bounding faults. Major post-depositional faulting and forced folding were related to a change in the extension vector to an orthogonal position with respect to the rift axis and overprinting of the E–W faults by an NE–SW normal fault system. The origin of the palaeostress field of the earlier, oblique, extensional phase remains controversial and can be attributed either to the effects of the Alpine lithospheric root or (perhaps more likely because of the dominant volcanism at the onset of Eger Graben formation) to doming due to thermal perturbation of the lithosphere. The later, orthogonal, extensional phase is explained by stretching along the crest of a growing regional-scale anticlinal feature, which supports the recent hypothesis of lithospheric folding in the Alpine–Carpathian foreland.     

Surficial deposits on salt diapirs (Zagros Mountains and Persian Gulf Platform, Iran): Characterization, evolution, erosion and the influence on landscape morphology

The surfaces of salt diapirs in the Zagros Mountains are mostly covered by surficial deposits, which significantly affect erosion rates, salt karst evolution, land use and the density of the vegetation cover. Eleven salt diapirs were selected for the study of surficial deposits in order to cover variability in the geology, morphology and climate in a majority of the diapirs in the Zagros Mountains and Persian Gulf Platform. The chemical and mineralogical compositions of 80 selected samples were studied mainly by X-ray powder diffraction and X-ray fluorescence. Changes in salinity along selected vertical profiles were studied together with the halite and gypsum distribution. The subaerial residuum formed from minerals and rock detritus released from the dissolved rock salt is by far the most abundant material on the diapirs. Fluvial sediments derived from this type of residuum are the second most common deposits found, while submarine residuum and marine sediments have only local importance. The mineralogical/chemical composition of surficial deposits varies amongst the three end members: evaporite minerals (gypsum/anhydrite and minor halite), carbonates (dolomite and calcite) and silicates-oxides (mainly quartz, phyllosilicates, and hematite). Based on infiltration tests on different types of surficial deposits, most of the rainwater will infiltrate, while overland flow predominates on rock salt exposures. Recharge concentration and thick accumulations of fine sediment support relatively rich vegetation cover in some places and even enable local agricultural activity. The source material, diapir relief, climatic conditions and vegetation cover were found to be the main factors affecting the development and erosion of surficial deposits. A difference was found in residuum type and landscape morphology between the relatively humid NW part of the studied area and the arid Persian Gulf coast: In the NW, the medium and thick residuum seems to be stable under current climatic conditions. Large sinkholes and blind valleys with sinking streams are common. On other diapirs, the original thick residuum is undergoing erosion and the new morphology is currently represented by salt exposures and badland-like landscapes or by fields of small sinkholes developed in the thin residuum. Models for evolution of the subaerial residuum and the diapir landscape/morphology are described in this paper. While the thick residuum with vegetation has very low erosion rates, the salt exposures and thin residuum are eroded rapidly. During wet periods (e.g. early Holocene), the diapirs rose and salt glaciers expanded as the influx of salt mass was much faster compared to erosion. After the onset of an arid climate, c. 6 ka BP, the rising of the some diapir surfaces decreased or even reversed due to acceleration of erosion thanks to vegetation degradation and changes in the residuum type and thickness.     

Arsenic in contaminated soils and anthropogenic deposits at the Mokrsko,Roudný, and Kašperské Hory gold deposits,Bohemian Massif (CZ)

Soil, mine tailing, and waste dump profiles above three mesothermal gold deposits in the Bohemian Massif with different anthropogenic histories have been studied. Their mineralogical, major element, and arsenic (As) contents and the contents of secondary arsenic minerals were analyzed. The As-bearing minerals were concentrated and determined using X-ray diffraction (XRD) analysis, the Debye-Scherrer powder method, scanning electron microscopy (SEM), and energy-dispersive microanalysis (EDAX). The amorphous hydrous ferric oxides (HFO), As-bearing goethite, K-Ba- or Ca-Fe- and Fe- arsenates pharmacosiderite, arseniosiderite, and scorodite, and sulfate-arsenate pitticite were determined as products of arsenopyrite or arsenian pyrite oxidation. The As behaviour in the profiles studied differs in dependence on the surface morphology, chemical and mineralogical composition of the soil, mine wastes or tailings, oxidation conditions, pH, presence of (or distance from) primary As mineralization in the bedrock, and duration of the weathering effect. Although the primary As mineralization and the bedrock chemical composition are roughly similar, there are distinct differences in the As behaviour amongst the Mokrsko, Roudný and Kaperské Hory deposits.     

Spherical integral transforms of second-order gravitational tensor components onto third-order gravitational tensor components

New spherical integral formulas between components of the second- and third-order gravitational tensors are formulated in this article. First, we review the nomenclature and basic properties of the second- and third-order gravitational tensors. Initial points of mathematical derivations, i.e., the second- and third-order differential operators defined in the spherical local North-oriented reference frame and the analytical solutions of the gradiometric boundary-value problem, are also summarized. Secondly, we apply the third-order differential operators to the analytical solutions of the gradiometric boundary-value problem which gives 30 new integral formulas transforming (1) vertical-vertical, (2) vertical-horizontal and (3) horizontal-horizontal second-order gravitational tensor components onto their third-order counterparts. Using spherical polar coordinates related sub-integral kernels can efficiently be decomposed into azimuthal and isotropic parts. Both spectral and closed forms of the isotropic kernels are provided and their limits are investigated. Thirdly, numerical experiments are performed to test the consistency of the new integral transforms and to investigate properties of the sub-integral kernels. The new mathematical apparatus is valid for any harmonic potential field and may be exploited, e.g., when gravitational/magnetic second- and third-order tensor components become available in the future. The new integral formulas also extend the well-known Meissl diagram and enrich the theoretical apparatus of geodesy.     

Evaluation of the Weather Research and Forecasting Mesoscale Model for GABLS3: Impact of Boundary-Layer Schemes,Boundary Conditions and Spin-Up

We evaluated the performance of the three-dimensional Weather Research and Forecasting (WRF) mesoscale model, specifically the performance of the planetary boundary-layer (PBL) parametrizations. For this purpose, Cabauw tower observations were used, with the study extending beyond the third GEWEX Atmospheric Boundary-Layer Study (GABLS3) one-dimensional model intercomparison. The WRF model (version 3.4.1) contains 12 different PBL parametrizations, most of which have been only partially evaluated. The GABLS3 case offers a clear opportunity to evaluate model performance, focusing on time series of near-surface weather variables, radiation and surface flux budgets, vertical structure and the nighttime inertial oscillation. The model results revealed substantial differences between the PBL schemes. Generally, non-local schemes tend to produce higher temperatures and higher wind speeds than local schemes, in particular, for nighttime. The WRF model underestimates the 2-m temperature during daytime (about \(2\) K) and substantially underestimates it at night (about \(4\) K), in contrast to the previous studies where modelled 2-m temperature was overestimated. Considering the 10-m wind speed, during the night turbulent kinetic energy based schemes tend to produce lower wind speeds than other schemes. In all simulations the sensible and latent heat fluxes were well reproduced. For the net radiation and the soil heat flux we found good agreement with daytime observations but underestimations at night. Concerning the vertical profiles, the selected non-local PBL schemes underestimate the PBL depth and the low-level jet altitude at night by about 50 m, although with the correct wind speed. The latter contradicts most previous studies and can be attributed to the revised stability function in the Yonsei University PBL scheme. The local, turbulent kinetic energy based PBL schemes estimated the low-level jet altitude and strength more accurately. Compared to the observations, all model simulations show a similar structure for the potential temperature, with a consistent cold bias ( \(\approx \) 2 K) in the upper PBL. In addition to the sensitivity to the PBL schemes, we studied the sensitivity to technical features such as horizontal resolution and domain size. We found a substantial difference in the model performance for a range of 12, 18 and 24 h spin-up times, longer spin-up time decreased the modelled wind speed bias, but it strengthened the negative temperature bias. The sensitivity of the model to the vertical resolution of the input and boundary conditions on the model performance is confirmed, and its influence appeared most significant for the non-local PBL parametrizations.     

Narrowband dm-spikes in the 2 GHz frequency range and MHD cascading waves in reconnection outflows

Two examples of clouds of narrowband dm-spikes, observed by the Ondejov radiospectrograph in the 1–2 GHz frequency range, are analyzed. After transformation of the frequency scales to distances in the solar atmosphere, the power spectra analysis of size scales reveals a spectral index of –5/3, resembling that of Kolmogorov spectra of turbulent cascades. The narrowband dm-spikes are interpreted as radio emission from electrons accelerated in MHD cascading waves, probably generated in plasma outflows from magnetic field reconnection.