A new approach to the estimation of analytical precision

Methods used for the estimation of analytical precision commonly suffer from two deficiencies which give rise to misleading results. These are: (1) the methods take no account of changes in absolute or relative error over the concentration range, and (2) they tend for other reasons to produce optimistically-biassed results. The difficulties can be avoided by the correct use of duplicate determinations. One method presented allows precision parameters to be estimated. The other gives rise to a simple control chart for use in geochemical analysis.     

Comet Bowell (1980b): Measurement of the optical thickness of the coma and particle albedo from a stellar occultation

Comet Bowell (1980b) was observed to pass within 0.25 ± 0.09 arc sec of a star (about 540 km at the comet), where the absorption of starlight by the dust coma was found to be 3% (±1%). The implied optical thickness of 0.03 differs greatly from other determinations and gives a mass of 3 × 10¹³ g for the coma within 1 × 10⁴ km of the nucleus. Coupled with absolute continuum filter photometry, these results indicate a very low particle albedo consistent with fluffy carbonaceous material. This experiment indicates the need to observe nearly central occulations by several observers to measure the optical thickness profile of a comet. The advantages of using a charge-coupled device area photometer for such observations are discussed.     

Subduction Influence on Oxygen Fugacity and Trace and Volatile Elements in Basalts Across the Cascade Volcanic Arc

Fluids or melts derived from a subducting plate are often citedas a mechanism for the oxidation of arc magmas. What remainsunclear is the link between the fluid, oxygen fugacity, andother major and trace components, as well as the spatial distributionof the impact of those fluids. To test the potential effectsof addition of a subduction-derived fluid or melt to the sub-arcmantle, olivine-hosted melt inclusions from primitive basalticlavas sampled from across the central Oregon Cascades (43°–45°N)have been analyzed for major, trace and volatile elements andfO₂. Oxygen fugacity was determined in melt inclusions fromsulfur speciation determined by electron microprobe and fromolivine–chromite oxygen geobarometry. The overall rangein fO₂ based on sulfur speciation measurements is from <–0·25log units to + 1·9 log units (FMQ, where FMQ is fayalite–magnetite–quartzbuffer). Oxygen fugacity is positively correlated with fluid-mobiletrace element and light rare earth element contents in basaltsgenerated by relatively low-degree partial melting. Establishinga further correlation between fO₂ and fluid-mobile trace elementabundances with position along the arc requires the basaltsto be subdivided into shoshonitic, calc-alkaline, low-K tholeiiteand enriched intraplate basalt groups. Melt inclusions fromenriched intraplate and shoshonitic lavas show increasing fO₂and trace element abundances closer to the trench, whereas calc-alkalinemelt inclusions exhibit no significant across-arc variations.Low-K tholeiitic melt inclusions record an increase in incompatibletrace elements closer to the trench; however, there is no correlatedincrease in fO₂. The correlation observed in enriched intraplateand shoshonitic melt inclusions is interpreted to reflect aprogressively greater proportion of a fluid-rich, oxidized subductioncomponent in magmas generated nearer the subduction zone. Significantly,calc-alkaline melt inclusions with high ratios of large ionlithophile elements to high field strength elements, characteristicof ‘typical’ arc magmas, have oxidation states indistinguishablefrom low-K tholeiite and enriched intraplate basalt melt inclusions.The lack of across-arc geochemical variation in calc-alkalinemelt inclusions may suggest that these basalts are not necessarilythe most appropriate magmas for examining recent addition ofa subduction component to the sub-arc mantle. Flux and batchmelt model results produce a wide range of predicted amountsof melting and subduction component added to the mantle source;however, general trends characterized by increased melting andproportion of the subduction component from enriched intraplate,to low-K tholeiite, to calc-alkaline are robust. The model resultsdo not require enriched intraplate, low-K tholeiite and calc-alkalinemagmas to be produced from the same more fertile mantle source.However, enriched intraplate magmas, in contrast to calc-alkalineand low-K tholeiite magmas, cannot be generated from a depletedmantle source. Flux or batch melting of either the more fertileor depleted mantle sources used to generate the low-K tholeiite,calc-alkaline, and enriched intraplate magmas cannot reproduceshoshonitic compositions, which require a significantly depletedmantle source strongly metasomatized by a subduction component.The potential mantle source for shoshonitic basalts has a predictedfO₂ (after oxidation) from + 0·3 to + 2·4 logunits (FMQ) whereas the mantle source for low-K tholeiite, calc-alkaline,and enriched intraplate magmas may range from –1·1to + 0·7 log units (FMQ). KEY WORDS: basalt; Cascades; melt inclusions; oxidation state; volatiles     

Modelling of sediment supply from torrent catchments in the Western Alps using the sediment contributing area (SCA) approach

The production of coarse sediment in mountain landscapes depends mainly on the type and activity of geomorphic processes and topographic and natural conditions (e.g. vegetation cover) of these catchments. The supply of sediment from these slopes to mountain streams and its subsequent transport lead to sediment connectivity, which describes the integrated coupled state of these systems. Studies from the Northern Calcareous Alps show that the size of the sediment contributing area (SCA), a subset of the drainage area that effectively delivers sediment to the channel network, can be used as a predictor of sediment delivery to mountain streams. The SCA concept is delineated on a digital elevation model (DEM) using a set of rules related to the steepness and length of slopes directly adjacent to the channel network, the gradient of the latter and the vegetation cover. The present study investigates the applicability of this concept to the Western Alps to identify geomorphologically active areas and to estimate mean annual sediment yield (SY) in mainly debris-flow-prone catchments. We use a statistical approach that shows a parameter optimisation and a linear regression of SY on SCA extent. We use a dataset of ~25 years of assessed coarse sediment accumulation in 35 sediment retention basins. In the investigated catchments, sediment transport is governed by several factors, mainly by the extent of vegetation-free areas with a minimum slope of 23° that is coupled to the channel network with a very low gradient of the latter. With our improved framework, we can show that the SCA approach can be applied to catchments that are widely distributed, in a large spatial scale (hectare area) and very heterogeneous in their properties. In general, the investigated catchments show high connectivity, resulting in significant correlations between long-term average yield and the size of the SCA.     

Subsource characterization: Obsidian utilization of subsources of the Coso volcanic field,Coso Junction,California, USA

Six chemical subsource groups were identified in the analysis of 84 obsidian samples collected from subsource locations at Coso volcanic field, California. In prehistoric times, Coso provided obsidian for artifacts found from San Francisco Bay to San Diego to Death Valley to the eastern Mojave Desert. Subsource groups were defined by instrumental neutron activation analysis (INAA) of 29 elements followed by cluster analysis, principal component analysis, and bivariate plotting. The new data are compared to previously published INAA and X‐ray fluorescence data. Characterization of 55 obsidian artifacts from archaeological sites located approximately 100 miles from Coso suggests preferential usage of specific subsources as a function of the directionality of travel. The results are consistent with a bimodal (resident and itinerant) model of procurement. This research illustrates the importance of accurate sourcing of obsidian artifacts when attempting to define subsource usage. © 2004 Wiley Periodicals, Inc.     

新疆北部古地磁研究

通过和布克赛尔、克拉玛依、玛纳斯—乌鲁木齐地区泥盆纪到白垩纪古地磁研究,主要取得以下结果:(1)首次建立了准噶尔西北缘及南缘石炭纪—白垩纪古地磁极移曲线,由石炭纪到二叠纪的古地磁极位置基本在同一区间,说明该时期这些地区为一个统一的构造单元,而其古地磁极明显与塔里木、哈萨克斯坦、西伯利亚地块存在着差异。(2)该地区侏罗纪及白垩纪古地磁结果与塔里木地块结果一致,侏罗纪乌鲁木齐与和布克赛尔磁偏角相差30°左右,说明和布克赛尔地区相对乌鲁木齐地区逆时针旋转了30°左右,晚古生代以后曾发生过南向移动,而侏罗、白垩纪以来均向北发生了相当规模的北向运动,并发生了相对旋转,目前东、西准噶尔的构造格局可能就是由于局部相对旋转造成的。(3)中国大陆在早二叠世还不是一个联合的整体,而是以相互分离的独立块体分布于45°N—15°S的古特提斯洋中。(4)该地区二叠纪的磁偏角为165°—168°,而塔里木为218°,哈萨克斯坦为229°,说明存在35°—55°的逆时针旋转,这个旋转可能是由于西部推覆构造造成的。如果将西准噶尔超基性岩带顺时针旋转35°—55°后,东准噶尔超基性岩带、西准噶尔超基性岩带和斋桑泊—鲁布佐夫斯克超基性岩带应在同一构造带上。(5)该地区晚古生代古纬度变化不明显,位于30°—45