Storm-built sand ridges on the Maryland inner shelf: a preliminary report

Several aspects of the Maryland ridge field are pertinent to the problem of ridge genesis in response to Holocene sea-level rise. There is a systematic morphologic change fromshoreface ridges throughnearshore ridges tooffshore ridges, which reflects the changing hydraulic regime. Grain size is 90° out of phase with topography, so that the coarsest sand lies between the axis of each trough and the adjacent seaward ridge crest, while the finest sand lies between each ridge crest and the axis of the adjacent seaward trough. Finally, analysis over a 43-year period on an outer ridge reveals a systematic pattern of landward flank erosion, seaward flank deposition, and seaward crest migration. These relationships support a model which explains the ridges as consequences of the up-current shift of maximum bottom shear stress with respect to the crests of initial bottom irregularities. The oblique orientation of the ridges with respect to the beach may be at least partly due to the more rapid migration rate of the ridges’ inshore ends.     

Prediction of wave height based on half-cycle excursion analysis

This paper presents a method to evaluate statistical properties of half-cycle excursions including extreme values. The probability density function for half-cycle excursions for an arbitrarily given wave spectrum is developed based on the Gaussian assumption. The results of numerical computations carried out using wave data obtained during hurricane Camille show that the half-cycle probability density function agrees well with the histogram constructed from the data. The extreme wave height for design consideration computed with risk parameter 0.01 is approximately 20% greater than the observed extreme height.     

A new concept of a hull form to improve wave response characteristics for marine construction barges

The object of the new hull form is to provide a single hull which possesses long natural periods of roll and heave and has substantially reduced motion response amplitudes in very high sea states. Model tests and preliminary estimates indicated that the new hull form can be designed for roll and heave motions nearly equivalent to those of much larger semisubmersible units.All existing conventional marine construction barges have rectangular cross section hull. The new hull form consists of a system of upper side tanks and lower side tanks added onto a rectangular cross section hull. The upper tanks and lower tanks form longitudinal troughs on the port and starboard sides. Structural grillage of any open type is to connect the upper and lower tanks at the side of the vessel. Figure 1 indicates a profile and a typical transverse section of the new hull form. The new hull comprises the concept of reduced water plane area which is turn results in low transverse metacentric height and low tons per in. immersion. The novel features of combining low GM_T and low TPI with extremely heavy damping and added mass of the entrained water characteristics result in very long natural periods of roll and heave and considerably small rolling and heaving amplitudes in high sea states. The open side shell plating on the side of the vessel functions to dissipate wave energy at the side of the vessel which would have otherwise been transmitted to the vessel and caused the vessel to respond. This paper presents the conceptual foundation and outline of the new hull form. Model test results are presented and implemented. Also presented is the design philosophy.     

Intrinsic orbital coordinates on a Hamiltonian surface

A reversible dynamical system with two degrees-of-freedom is reduced to a second-order, Hamiltonian system under a change of independent variable. In certain circumstances, the reduced order system may be integrated following an orthogonal curvilinear transformation from Cartesian x,y to intrinsic orbital coordinates , . Solutions for the orbit position and true time variables are expressed by: % MathType!MTEF!2!1!+- % feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn % hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr % 4rNCHbGeaGGipm0dc9vqaqpepu0xbbG8F4rqqrFfpeea0xe9Lq-Jc9 % vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x % fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaamiEaiabg2 % da9iaadAgacaGGOaGaeqOVdGNaaiilaiabeE7aOjaacMcacaGGSaGa % aeiiaiaadMhacqGH9aqpcaWGNbGaaiikaiabe67a4jaacYcacqaH3o % aAcaGGPaGaaiilaiaabccacaWGKbGaamiDaiabg2da9iabgglaXoaa % dmaabaWaaSaaaeaacaWGibWaa0baaKqaahaacqaH+oaEaeaacaqGYa % aaaOGaam4raiabgUcaRiaadIeadaqhaaqcbaCaaiabeE7aObqaaiaa % ikdaaaGccaWGfbaabaGaaGOmaiaacIcacaWGibGaey4kaSIaamyvai % aacMcaaaaacaGLBbGaayzxaaWaaWbaaSqabKqaGhaacaaIXaGaai4l % aiaaikdaaaGccaWGKbGaeqiXdqhaaa!6498! \[ x = f(\xi ,\eta ),{\rm{ }}y = g(\xi ,\eta ),{\rm{ }}dt = \pm \left[ {\frac{{_\xi ^{\rm{2}} {\ie} + _\eta ^2 }}{{2( + U)}}} \righ \]1446 1040 where U is the potential function, and z is the new independent variable. The functions f, g may be expressed by quadratures when the metric coefficients {\er},{\ie} are specified. Two second-order, partial differential equations specify {\er}, {\ie} and Hamiltonian {\tH}. Auxiliary conditions are needed because the solutions are underdetermined. For example, both sets of curvilinear coordinate lines are orbits when certain dynamical compatibility conditions between U and {\ie} (or {\er}) are satisfied. Alternatively, when orbits cross the parametric curves, the auxiliary condition {\er} = {\ie} specifies a conformal transformation, and the partial differential equation for {\tH} may be reduced to an ordinary differential equation for the orbit curve. In either case, integrability is guaranteed for Lionville dynamical systems. Specific applications are presented to illustrate direct solution for the orbit (e.g., two fixed centers) and inverse solution for the potential.     

Stratigraphy of total metals in PIRLA sediment cores

Sediment cores from 30 low-alkalinity lakes in northern New England (NE), New York (NY), the northern Great Lakes States (NGLS) of Minnesota, Michigan, and Wisconsin, and Florida (FL) have been dated by ²¹⁰Pb and analyzed for water and organic content, eight major elements (Al, Ti, Fe, Mn, Ca, Mg, Na, K) plus four trace metals (Pb, Zn, Cu, and V). Variations in the percentages of major elements through time are dominated by long-term independent variations in the abundance of SiO₂, FeO, and to a lesser extent Ca and Al. Additional variations are caused by varying proportions of inorganic matter. Major variations in chemistry are generally unrelated to documented distrubances in the watersheds; most disturbances are minor fires or selective logging.Accelerated accumulation of Pb from atmospheric sources into sediment first occurs in sediment dated between 1800 and 1850 in NY and NE, slightly later in the NGLS region, and about 1900 in FL. Modern accumulation rates in all areas are comparable (ca. 1 to 4 g cm^–2 yr^–1). Accumulation rates of Pb in some lakes have declined significantly from 1975 to 1985. Atmospheric deposition of anthropogenic Zn and Cu is also indicated by generally increasing accumulation rates in sediment cores, but the record is not as clear nor are chemical profiles in all lakes parallel to the trends in atmospheric emissions inferred on the basis of fossil fuel consumption, smelting, and other industrial activities. Inter-lake variations in profiles of Cu and Zn are large. Vanadium accumulation rates increase by the 1940s in NY and NE, but not until the 1950s in the NGLS region. This timing correlates with regional trends in the combustion of fuel oil, a major source of atmospheric V.Acidification of some of the lakes is suggested by decreases in the concentration and accumulation rates of Mn, Ca, and Zn in recent sediment, relative to other elements of catchment origin. The decreases generally occur slightly before the onset of acidification as indicated by diatoms. Increased sediment accumulation rates for Fe may indicate the acidification of watershed soils. The use of the accumulation rate of TiO₂ as an indicator of rates of erosion and for normalization of trace metal accumulation rates is in question for lakes where the flux of TiO₂ from the atmosphere varies and is a significant fraction of the total flux of TiO₂ to the sediment.This is the thirteenth of a series of papers to be published by this journal which is a contribution of the Paleoecological Investigation of Recent Lake Acidification (PIRLA) project. Drs. D. F. Charles and D. R. Whitehead are guest editors for this series.     

Distribution and Trophic Importance of Anthropogenic Nitrogen in Narragansett Bay: An Assessment Using Stable Isotopes

Narragansett Bay has been heavily influenced by human activities for more than 200 years. In recent decades, it has been one of the more intensively fertilized estuaries in the USA, with most of the anthropogenic nutrient load originating from sewage treatment plants (STP). This will soon change as tertiary treatment upgrades reduce nitrogen (N) loads by about one third or more during the summer. Before these reductions take place, we sought to characterize the sewage N signature in primary (macroalgae) and secondary (the hard clam, Mercenaria mercenaria) producers in the bay using stable isotopes of N (δ¹⁵N) and carbon (δ¹³C). The δ¹⁵N signatures of the macroalgae show a clear gradient of approximately 4‰ from north to south, i.e., high to low point source loading. There is also evidence of a west to east gradient of heavy to light values of δ¹⁵N in the bay consistent with circulation patterns and residual flows. The Providence River Estuary, just north of Narragansett Bay proper, receives 85% of STP inputs to Narragansett Bay, and lower δ¹⁵N values in macroalgae there reflected preferential uptake of ¹⁴N in this heavily fertilized area. Differences in pH from N stimulated photosynthesis and related shifts in predominance of dissolved C species may control the observed δ¹³C signatures. Unlike the macroalgae, the clams were remarkably uniform in both δ¹⁵N (13.2 ± 0.54‰ SD) and δ¹³C (−16.76 ± 0.61‰ SD) throughout the bay, and the δ¹⁵N values were 2–5‰ heavier than in clams collected outside the bay. We suggest that this remarkable uniformity reflects a food source of anthropogenically heavy phytoplankton formed in the upper bay and supported by sewage derived N. We estimate that approximately half of the N in the clams throughout Narragansett Bay may be from anthropogenic sources.     

Composition-Induced Variations in SIMS Instrumental Mass Fractionation during Boron Isotope Ratio Measurements of Silicate Glasses

An analytical artefact is reported here related to differences in instrumental mass fractionation between NIST SRM glasses and natural geological glasses during SIMS boron isotope determinations. The data presented demonstrated an average 3.4‰ difference between the NIST glasses and natural basaltic to rhyolitic glasses mainly in terms of their sputtering-induced fractionation of boron isotopes. As no matrix effect was found among basaltic to rhyolitic glasses, instrumental mass fractionation of most natural glass samples can be corrected by using appropriate glass reference materials. In order to confirm the existence of the compositionally induced variations in boron SIMS instrumental mass bias, the observed offset in SIMS instrumental mass bias has been independently reproduced in two laboratories and the phenomenon has been found to be stable over a period of more than one year. This study highlights the need for a close match between the chemical composition of the reference material and the samples being investigated.